MK x WLMOUSE Beast X Mini Pro Wireless 8K Mouse User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MK x WLMOUSE Beast X Mini Pro Wireless 8K Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. What's Included

The package for your Beast X Mini Pro mouse includes the following items:

• USB-C to USB-A cable
• 8K dongle
• 1K Nano dongle
• User manual
• PTFE skates
• Grip tape
• Carrying case

Image: The MK x WLMOUSE Beast X Mini Pro Wireless 8K Mouse, showcasing its lightweight, perforated blue design.

3. Setup

3.1 Initial Connection

Your Beast X Mini Pro mouse supports three connectivity modes: 2.4G Wireless, Bluetooth, and Wired USB-C.

2.4G Wireless Mode:

1. Locate the 8K or 1K Nano dongle included in the package.
2. Plug the dongle into an available USB-A port on your computer.
3. Turn on the mouse using the switch on its underside. The mouse should automatically connect to the dongle.

Bluetooth Mode:

1. Turn on the mouse and switch it to Bluetooth mode (refer to the mouse's underside for the mode switch).
2. On your computer, navigate to Bluetooth settings and search for new devices.
3. Select 'Beast X Mini Pro' from the list of available devices to pair.

Wired Mode:

1. Connect the provided USB-C to USB-A cable to the mouse and your computer.
2. The mouse will automatically switch to wired mode and begin charging.

3.2 Charging

Connect the mouse to your computer using the USB-C to USB-A cable. The mouse features a 220mAh battery. The LED indicator on the mouse will show charging status.

4. Operating Instructions

4.1 DPI Adjustment

The mouse's DPI (Dots Per Inch) can be adjusted from 400 to 30,000. Use the dedicated DPI button on the underside of the mouse to cycle through preset DPI stages. The LED indicator will change color to reflect the current DPI setting.

4.2 Polling Rate Adjustment

The polling rate is adjustable between 125-8000Hz. In wired mode, the maximum polling rate is 1000Hz. With the included 8K dongle, the mouse can achieve an 8000Hz polling rate in wireless mode. Adjust the polling rate via the mouse's software or dedicated buttons if available.

4.3 Lift-Off Distance (LOD)

The lift-off distance can be adjusted to 3 different levels: 0.7mm, 1mm, and 2mm. This setting helps prevent unintended cursor movement when lifting the mouse. Adjust this feature through the mouse's software.

4.4 Sensor and MCU

The Beast X Mini Pro is equipped with a PAW3950 HS sensor and a Nordic 52820 MCU, ensuring high precision and efficient wireless performance.

4.5 Buttons and Encoder

The side buttons utilize Blue Dots switches for tactile feedback. The mouse also features a Dust Proof Silver encoder switch for the scroll wheel, providing durability and smooth scrolling.

4.6 Lightweight Design

Weighing only 34g, the mouse's ultra-lightweight design enhances maneuverability and reduces fatigue during extended use.

5. Maintenance

5.1 Cleaning

To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no moisture enters the internal components. Avoid harsh chemicals or abrasive materials.

5.2 PTFE Skates

The included PTFE skates provide smooth gliding. If the skates show signs of wear, replace them with the extra PTFE skates provided in the package to maintain optimal performance.

5.3 Grip Tape

Apply the included grip tape to the sides of the mouse for enhanced grip and comfort, especially during intense gaming sessions. Ensure the mouse surface is clean and dry before applying.

6. Troubleshooting

6.1 Connectivity Issues

• 2.4G Wireless: Ensure the dongle is securely plugged into a USB-A port. Check that the mouse is switched to 2.4G mode. Try plugging the dongle into a different USB port.
• Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is in pairing mode. Remove and re-pair the device if connection fails.
• Wired: Confirm the USB-C cable is properly connected to both the mouse and the computer. Test with a different USB port or cable if necessary.

6.2 Performance Issues

• Lag/Stuttering: Ensure the mouse is fully charged. Reduce wireless interference by moving other wireless devices away from the dongle. Adjust the polling rate to a lower setting if experiencing instability.
• Inaccurate Tracking: Clean the optical sensor on the underside of the mouse. Ensure you are using the mouse on a suitable surface (a mouse pad is recommended). Adjust DPI settings if tracking feels too fast or slow.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the official MK website or contact your retailer. Keep your proof of purchase for any warranty claims.