1. Product Overview
The Paulmann 98178 Linion Power Supply Power Box Zigbee is an essential component of the Linion light channel system, designed to provide power and smart control capabilities. This power box acts as an infeed module for indirect power outlets, supporting a maximum system power of 144 watts, allowing for a system length of up to 8 meters. It integrates a Zigbee 3.0 interface for smart lighting control.
The system offers flexible and aesthetic lighting solutions for various indoor environments, enabling modular light shapes and configurations.
Image 1.1: The Linion light channel system demonstrating flexible and modular light shapes in a living room and hallway setting.
2. Safety Information
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the power supply is disconnected before any installation, maintenance, or cleaning.
- Do not exceed the maximum rated power of 144W for the system.
- Do not modify the product in any way. Use only original Paulmann components.
- Keep the product away from water and high humidity.
- This product is for indoor use only.
3. Package Contents
Verify that all components are present in the package before proceeding with installation:
- 1x Paulmann Linion Power Box Zigbee (Model 98178)
- 2x 50 cm connection cables
- 2x End caps for the light channel system
- Installation instructions
Note: A 175 cm cable for pendant solutions is optionally available and not included in the standard package.
Image 3.1: Contents of the Paulmann 98178 Linion Power Box package, including the power box, two connection cables, and two end caps.
Image 3.2: A diagram illustrating the dimensions of the Paulmann Linion Power Box (365mm x 100mm x 40mm) and confirming the inclusion of two 500mm cables and two end caps.
4. Setup and Installation
The Linion Power Box is designed for easy integration into the Linion light channel system. Follow these general steps for installation:
- Plan Your System: Determine the desired layout and length of your Linion light channel system. The Power Box supports a system length of up to 8 meters.
- Choose Power Supply Location: The Power Box can be used for indirect power outlets or as a ceiling canopy for pendant solutions (with optional cable).
- Mount the Power Box: Securely mount the Power Box to the ceiling or desired surface. Ensure proper ventilation.
- Connect Light Components: Use the provided 50 cm connection cables to link the Power Box to the Linion light channels. All connectors are included for easy assembly.
- Install End Caps: Place the end caps at the termination points of your light channel system for a clean finish.
- Electrical Connection: Connect the Power Box to the 230V mains supply. This step must be performed by a qualified electrician.
Image 4.1: Configuration guide for the Linion system, detailing the selection of power supply (Power Channel, Power Box), light components (0.5m/1m/1.5m channels, 90° Corner, 90° Curve), and optional pendant suspension accessories.
Image 4.2: An internal view of the Paulmann Linion Power Box, revealing the integrated LED driver and connection points for the light channels.
Image 4.3: A close-up showing the connection between the Paulmann Linion Power Box and a light channel, illustrating how the system components fit together.
5. Operating Instructions
Once installed and connected to the mains power, the Linion light channel system powered by the Power Box can be operated. The primary method of control is through its integrated Zigbee 3.0 interface.
- Power On/Off: The system will power on when electricity is supplied. Basic on/off control can be achieved via the main power switch.
- Smart Control: For advanced functions like dimming and scene control, refer to the 'Smart Control (Zigbee)' section below.
6. Smart Control (Zigbee)
The Paulmann Linion Power Box features a Zigbee 3.0 interface, enabling smart control of your lighting system. This allows for continuous dimming and other smart functionalities.
- Zigbee Gateway: Connect the Power Box to a compatible Zigbee 3.0 gateway (e.g., Paulmann Smart Home Gateway, Philips Hue Bridge, Amazon Echo with built-in Zigbee hub). Follow the gateway's instructions for adding new devices.
- Remote Control: Once paired with a Zigbee gateway, the system can be controlled via a compatible Zigbee remote control.
- Voice Command: Integrate with voice assistants like Amazon Alexa or Google Assistant through your Zigbee gateway for voice-activated control.
- App Control: Use the dedicated app for your Zigbee gateway to control dimming, set schedules, and create lighting scenes.
Image 6.1: Overview of smart control capabilities, highlighting warm white light, dimmability, Zigbee 3.0 compatibility, and readiness for Amazon Alexa and Google Assistant via a Zigbee gateway.
Image 6.2: A visual comparison demonstrating the versatility of smart lighting control, showing a room with standard white light on one side and dynamic, colored lighting on the other, enabled by Zigbee.
7. Specifications
| Specification | Value |
|---|---|
| Brand | Paulmann |
| Model Number | 98178 |
| Product Dimensions | 10 x 36.5 x 4 cm |
| Item Weight | 909 g |
| Colour | Signal Black |
| Voltage | 230 Volts (Input) / 24 Volts (Output) |
| Wattage (Max) | 144 Watts |
| Power and Plug Description | AC/DC |
| Control Interface | Zigbee 3.0 |
| Max System Length | 8 meters |
8. Maintenance
To ensure the longevity and optimal performance of your Paulmann Linion Power Box, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the Power Box. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Inspection: Periodically check for any visible damage to the cables or the Power Box itself. If any damage is found, discontinue use and contact customer support.
- Environment: Ensure the operating environment remains within recommended temperature and humidity ranges.
9. Troubleshooting
If you encounter issues with your Paulmann Linion Power Box, refer to the following common troubleshooting steps:
- No Power:
- Check if the main power supply is connected and switched on.
- Verify all connections between the Power Box and light channels are secure.
- Ensure the maximum wattage of 144W is not exceeded by the connected light channels.
- Zigbee Connectivity Issues:
- Ensure your Zigbee gateway is powered on and within range.
- Try re-pairing the Power Box with your Zigbee gateway according to the gateway's instructions.
- Check for any firmware updates for your Zigbee gateway.
- Dimming Not Working:
- Confirm the Power Box is correctly paired with your Zigbee controller/gateway.
- Ensure the connected light channels are dimmable.
If the problem persists after attempting these steps, please contact Paulmann customer support.
10. Warranty and Support
The Paulmann 98178 Linion Power Supply Power Box Zigbee comes with a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Paulmann customer service through their official website or the retailer where the product was purchased. Please have your model number (98178) and proof of purchase ready.
