LANTOOCAM P903W
LANTOOCAM Solar Trail Camera User Manual
Model: P903W
Brand: LANTOOCAM
1. Introduction
Welcome to your new LANTOOCAM Solar Trail Camera! This manual provides detailed instructions for setting up, operating, and maintaining your device. Please read it carefully before use to ensure optimal performance and longevity of your camera.
2. Safety Precautions
- Do not expose the camera to extreme temperatures outside its operating range (-10°C to 45°C).
- Ensure all covers are securely closed to maintain the IP66 waterproof rating.
- Use only recommended AA batteries. Do not mix old and new batteries or different types of batteries.
- Keep the camera away from strong magnetic fields.
- Avoid direct exposure of the lens to sunlight for prolonged periods, as this may damage the image sensor.
3. What's in the Box
- 1x 5K Solar Trail Camera
- 1x Mounting Belt
- 1x Stand Mount & Support
- 1x 64 GB SD CARD
- 1x User Manual
- 1x Screw Accessories
- 1x USB Type C Cable
- 1x Power Cable
4. Setup
4.1. Battery Installation
The camera features a built-in 5200mAh rechargeable battery and supports expandable power with 8 AA batteries (not included). For optimal performance and extended runtime, it is recommended to install 8 AA 1.5V alkaline batteries.
4.2. SD Card Installation and Formatting
Insert the included 64GB microSD card into the designated slot. For first-time use, it is crucial to format the SD card within the camera's settings to ensure compatibility and proper function. Refer to the user manual for detailed steps on formatting.
4.3. Mounting the Camera
Utilize the provided mounting belt or stand mount to secure the camera in your desired location. Ensure the camera is stable and positioned to capture the intended area. The solar panel should be oriented to receive maximum sunlight for continuous charging.
5. Operating Instructions
5.1. Powering On/Off
To power on the camera, slide the ON/OFF switch to the 'ON' position. To power off, slide it to 'OFF'. For testing and setup, use the 'TEST' mode.
5.2. Basic Operation Modes
The camera features various modes accessible via the 'MODE' button, including Photo, Video, and Photo+Video. Use the 'MENU' button to access settings and navigate with the arrow keys and 'OK' button.
5.3. Connecting via Wi-Fi and App
The camera supports Wi-Fi connectivity for easy access to photos and videos via a dedicated smartphone app. This allows for remote viewing, downloading, and setting adjustments without physically retrieving the camera or SD card.
5.4. Photo and Video Settings
Capture stunning wildlife with 60MP still images and crisp 5K UHD videos. Adjust resolution, video length, time-lapse settings, and more through the camera's menu or the companion app to suit your monitoring needs.
5.5. Night Vision
The camera features advanced night vision with 940nm invisible IR LEDs, providing clear footage up to 20 meters (65ft) in total darkness. The 120° wide-angle lens ensures broad coverage even at night.
6. Maintenance
6.1. Cleaning the Camera
Regularly wipe the camera's exterior, especially the lens and sensors, with a soft, dry cloth to remove dirt, dust, or moisture. Avoid using abrasive cleaners or solvents.
6.2. Battery Care
If using AA batteries, check their charge periodically. Remove batteries if the camera will not be used for an extended period to prevent leakage. The built-in solar panel helps maintain the internal battery charge.
6.3. Storage
When storing the camera, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on. | Low battery, incorrect battery installation, switch in wrong position. | Check battery level of both internal and AA batteries, ensure correct polarity, slide switch to 'ON'. |
| Poor image/video quality. | Dirty lens, low light conditions (for non-night vision), incorrect resolution settings. | Clean the lens, ensure adequate lighting, adjust photo/video resolution settings. |
| Wi-Fi connection issues. | Out of range, incorrect password, app malfunction. | Move closer to the camera, re-enter Wi-Fi password, restart the app and/or camera. |
| Camera not detecting motion. | PIR sensor blocked, sensitivity setting too low, object out of range. | Ensure clear line of sight for PIR sensor, increase sensitivity, place camera within detection range. |
| SD card error. | SD card not formatted, corrupted, or incompatible. | Format the SD card in the camera, try a different compatible SD card. |
8. Specifications
- Model: P903W
- Video Resolution: 5K
- Photo Resolution: 60 MP
- Power Source: Solar Powered (with internal 5200mAh battery and 8xAA battery compatibility)
- Water Resistance: Waterproof (IP66)
- Viewing Angle: 120 Degrees
- Night Vision Range: 20 Meters (65ft)
- Connectivity: Wi-Fi
- Dimensions: 1 x 1 x 1 inches
- Weight: 1.37 pounds
- Operating Temperature: -10°C to 45°C (14°F to 113°F)
9. Warranty and Support
For warranty information and technical support, please refer to the manufacturer's official website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Brand: LANTOOCAM
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.