Joaxswe 24-inch End Table with Charging Station

1. Introduction and Safety Information

Thank you for choosing the Joaxswe Retro Brown 24-inch End Table. This manual provides essential instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture. Please read this guide thoroughly before beginning assembly or use.

Important Safety Warnings:

• Pinch Points: During assembly and adjustment, be aware of potential pinch points. Keep hands and fingers clear of moving parts, especially when installing doors or adjusting shelves.
• Assembly and Use: Always assemble and use the end table strictly according to the instructions provided in the included assembly guide. Failure to do so may result in instability or damage.
• Stability: Ensure the table is placed on a flat, level surface. Proper installation is crucial to prevent tipping or collapse. If the table feels unstable after assembly, recheck all connections.
• Weight Capacity: Do not exceed the stated weight capacities for the tabletop and internal shelf. Overloading can compromise the table's structural integrity.
• Electrical Safety: The integrated charging station is designed for indoor use only. Do not expose it to moisture. Ensure the power cord is not pinched or damaged. Unplug the unit from the wall outlet when not in use or during cleaning.

2. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Table Panels (Top, Bottom, Sides, Back, Shelf)
• Glass Barn Doors (2)
• Integrated Charging Station with Power Cord
• Hardware Kit (screws, dowels, cam locks, hinges, handles, magnetic catches)
• Assembly Guide

3. Setup and Assembly Instructions

Assembly of the Joaxswe End Table requires basic household tools (not included), such as a screwdriver. Follow the detailed step-by-step instructions provided in the separate Assembly Guide included in your package. Below is a general overview and key considerations:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in the Assembly Guide to identify each piece.
2. Assemble Frame: Begin by connecting the side panels to the bottom panel, then attach the back panel. Ensure all connections are secure.
3. Install Adjustable Shelf: Insert the shelf support pins into the desired holes on the inner side panels. Place the adjustable shelf onto these pins. The shelf can be repositioned later to accommodate different item heights.
4. Attach Top Panel: Secure the top panel to the assembled frame.
5. Install Doors: Attach the hinges to the glass barn doors, then secure the doors to the front frame of the table. Ensure the doors open and close smoothly. Install the magnetic catches to hold the doors closed.
6. Install Handles: Attach the door handles.
7. Integrate Charging Station: Carefully insert the charging station unit into the designated cutout on the tabletop. Ensure it sits flush and is securely in place.
8. Final Check: Once assembled, gently shake the table to check for stability. Tighten any loose connections.

4. Operating Instructions

4.1 Using the Charging Station

1. Connect Power: Plug the 4.9-foot power cord from the charging station into a standard wall outlet.
2. Charge Devices: Use the two 125V/12A AC outlets for larger electronics or power adapters. Use the two 5V/2A USB ports to charge smartphones, tablets, or other USB-powered devices.
3. Safety: Do not overload the charging station. Avoid spilling liquids on the unit. Unplug when not in use.

4.2 Adjusting the Storage Shelf

1. Empty Shelf: Remove all items from the adjustable shelf.
2. Remove Pins: Carefully lift the shelf and remove the four metal support pins from their current holes.
3. Reposition Pins: Insert the support pins into the desired new set of holes on the inner side panels. Ensure they are level.
4. Replace Shelf: Place the shelf back onto the support pins, ensuring it rests securely.

5. Maintenance

Proper care will extend the life and appearance of your Joaxswe End Table:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the wood finish. Dry immediately with a clean cloth.
• Spills: Clean up spills immediately to prevent staining or damage to the wood.
• Dusting: Regularly dust with a dry, soft cloth.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or cracking of the wood.
• Check Connections: Periodically check and tighten all screws and fasteners to maintain stability.
• Charging Station: Keep the charging station free of dust and debris. Do not attempt to disassemble or repair the electrical components yourself.

6. Troubleshooting

If you encounter issues with your end table, refer to the following common solutions:

• Table is Wobbly:
  • Ensure all screws and fasteners are securely tightened.
  • Verify the table is on a level surface. Use furniture pads or shims if necessary to stabilize.
  • Recheck assembly steps in the Assembly Guide to ensure all parts are correctly installed.
• Charging Station Not Working:
  • Ensure the power cord is fully plugged into a functional wall outlet.
  • Check if the wall outlet itself is working by plugging in another device.
  • Ensure devices are properly connected to the AC outlets or USB ports.
  • Avoid overloading the charging station with too many high-power devices simultaneously.
• Doors Do Not Close Properly:
  • Check that the hinges are securely attached and aligned. Adjust if necessary.
  • Ensure the magnetic catches are properly installed and aligned with the door magnets.

7. Specifications

8. Official Product Videos

No official product videos from the seller are available for this item at this time.

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided in your product packaging or on the official Joaxswe website. Keep your purchase receipt for warranty claims.