Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your HAUSOURCE Twin Size Floating Bed Frame. This innovative bed frame features a unique floating design with inward bed legs to prevent collisions, a convenient storage headboard, integrated LED lights, and a removable charging station. Please read this manual thoroughly before beginning assembly or operation to ensure proper use and longevity of your product.
Safety Information
Always follow the assembly instructions carefully to prevent instability or collapse. Be cautious around the open space below the bed to avoid trapping objects. Use the LED lights and charging station features responsibly to prevent fire hazards.
- Ensure all components are present and undamaged before assembly.
- Assemble the bed frame on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, but ensure all connections are secure.
- Keep small parts away from children during assembly.
- Do not exceed the maximum weight capacity of 800 lbs.
- Ensure electrical connections for LED lights and charging station are properly secured and not exposed to moisture.
- Periodically check all bolts and connections for tightness and re-tighten as needed.
Package Contents
Before assembly, verify all components are present and undamaged. Refer to the included installation manual for a complete list and identification of parts. The main components typically include:
- Metal Bed Frame Components
- Headboard with Storage Shelf
- Metal Slats
- LED Light Strip
- Removable Charging Station (with power cord)
- Assembly Hardware (screws, bolts, tools)
- Installation Manual
This diagram illustrates the overall dimensions of the twin bed frame, its 800 lbs weight capacity, the 3.0 ft LED light strip, and the 4.9 ft charging station cord.
Setup and Assembly
The HAUSOURCE Floating Bed Frame is designed for easy assembly, typically completed within 45 minutes. Follow these steps carefully, referring to the numbered parts in your included installation manual.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface. Match each part to the corresponding number in the instruction manual.
- Assemble the Main Frame: Connect the side rails and support beams according to the manual. Ensure all connections are snug but do not fully tighten bolts until the frame is fully aligned.
- Attach the Headboard: Secure the headboard to the main frame using the provided hardware. The headboard includes a 3.9-inch storage shelf.
- Install Slats: Place the metal slats onto the designated supports on the frame. The U-shaped groove design facilitates easy installation. Ensure all slats are securely in place.
- Connect LED Lights and Charging Station: Affix the LED light strip to the designated area on the headboard. Plug in the LED light power cable. Attach the removable charging station to your desired location on the frame and plug its power cord into a wall outlet.
- Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws to ensure the frame is sturdy and stable.
This image displays the robust metal frame structure and slat system, highlighting the ease of assembly.
Detailed views of the frame's construction, illustrating features for easy assembly, stability, and mattress retention.
Operating Instructions
LED Lights
The integrated LED light strip on the headboard allows you to create various relaxed atmospheres in your bedroom.
- Power On/Off: Ensure the LED light power cable is connected to a suitable power source. Use the included remote control to turn the lights on or off.
- Color Selection: The remote control allows you to choose from 20 static colors.
- Dynamic Modes: Select from 22 dynamic modes to create different lighting effects.
- Brightness and Speed Adjustment: Adjust the brightness of the static colors and the speed of the dynamic modes using the remote control.
The LED lights offer 20 static colors and 22 dynamic modes, controllable via the included remote for adjustable speed and brightness.
Charging Station
The movable multifunctional charging station provides convenient access to power for your electronic devices.
- Placement: The charging station can be hung anywhere along the bed frame where it is most convenient for you.
- Power Connection: Plug the charging station's 4.9-foot power cord into a standard wall outlet.
- Device Charging: Utilize the 2 AC outlets (120V/12A), 1 USB port (5V/2A), and 1 Type-C port to charge your phone, tablet, or other electronic devices.
Detailed view of the removable charging station, featuring 2 AC outlets, 1 USB port, and 1 Type-C port for convenient device charging.
Maintenance
Proper maintenance will ensure the longevity and continued performance of your HAUSOURCE bed frame.
- Regular Inspection: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten any loose hardware as necessary.
- Cleaning the Frame: Clean the metal frame with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
- LED Lights and Charging Station: Keep the LED light strip and charging station free from dust and moisture. Do not immerse them in water.
- Under-Bed Area: The 8.5-inch clearance under the bed allows for easy cleaning. Regularly clean this space to maintain a tidy room.
- Mattress Care: Ensure your mattress is compatible with the bed frame and does not excessively slide. Consider using a non-slip mattress pad if needed.
Troubleshooting
This section addresses common issues you might encounter with your bed frame.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is unstable or wobbles. | Loose bolts or uneven assembly. | Check all connections and tighten bolts securely. Ensure the frame is assembled on a flat, level surface. |
| LED lights do not turn on. | Power cable disconnected, remote battery low, or light strip malfunction. | Verify the LED light power cable is securely plugged into a working outlet. Replace the remote control battery if necessary. If the issue persists, contact customer support. |
| Charging station not providing power. | Power cord disconnected, wall outlet issue, or device compatibility. | Ensure the charging station's power cord is fully plugged into a functional wall outlet. Test the outlet with another device. Try charging different devices to rule out device-specific issues. If the problem continues, contact customer support. |
| Mattress slides on the frame. | Lack of mattress retention or incompatible mattress type. | Ensure the mattress is properly aligned on the frame. The frame is designed with features to prevent sliding; verify they are correctly installed. A non-slip mattress pad can be used for additional stability. |
Specifications
- Brand: HAUSOURCE
- Model: Twin with headboard (B0F1FSC2KQ)
- Material: Metal
- Color: Black
- Product Dimensions (L x W x H): 200 x 99 x 103 cm (78.7 x 39.0 x 40.6 inches)
- Item Weight: 16 kg (35.2 lbs)
- Weight Capacity: 800 lbs
- Special Features: Charging Station, Floating Design, LED Lighting, No Box Spring Needed
- Headboard Storage Shelf Width: 3.9 inches
- Under-bed Clearance: 8.5 inches
- LED Light Strip Length: 3.0 ft / 0.9 m
- Charging Station Power Cord Length: 4.9 ft / 1.5 m
- Charging Station Output: 2 AC Outlets (120V/12A), 1 USB Port (5V/2A), 1 Type-C Port
- Compatible Mattress Size: Twin
- Included Components: Headboard, Installation Manual, Slats
Warranty and Support
HAUSOURCE is committed to providing quality products and customer satisfaction. Your bed frame is designed for durability and ease of use.
For any missing parts, defects, or issues encountered during installation or normal use, please contact HAUSOURCE customer service directly. We are dedicated to providing satisfactory solutions as soon as possible.
Please refer to your purchase documentation for specific warranty details and terms, as these may vary.
Contact Information: Please find the most current contact details for HAUSOURCE customer support in your product packaging or on the official HAUSOURCE website.