Introduction
This manual provides essential instructions for the safe and efficient operation of your Onsju 18 Egg Incubator. Please read thoroughly before use to ensure optimal hatching results and product longevity. This incubator is designed for hatching various poultry eggs, including chicken, duck, goose, pigeon, quail, and parrot eggs.
Figure 1: The Onsju 18 Egg Incubator with a variety of eggs and newly hatched chicks, showcasing its versatility.
Package Contents
Verify that all items listed below are included in your package:
- Incubator Host (Main Unit)
- Removable Egg Tray
- User Manual
- Power Supply Adapter
- External Battery Cable
- Spray Bottle
- Dual Water Bottles for Humidity
Figure 2: Visual representation of all components included in the Onsju 18 Egg Incubator package.
Setup
- Placement: Place the incubator on a stable, level surface in a room with a consistent temperature between 72°F and 80°F (22°C and 27°C). Avoid direct sunlight, drafts, or extreme temperature fluctuations. Do not place the incubator directly on the floor.
- Assembly:
- Ensure the egg turning mechanism is correctly assembled within the base.
- Place the removable egg tray onto the turning mechanism.
- Carefully place the transparent dome cover onto the base, ensuring it is securely seated.
- Water Filling for Humidity: Fill the dual independent water bottles with warm distilled water. Attach them to the designated ports on the side of the incubator. The incubator will automatically draw water to maintain humidity.
- Power Connection: Connect the power supply adapter to the incubator and then plug it into a standard electrical outlet. The unit will power on and display current temperature and humidity readings.
Figure 3: Proper placement of water bottles and internal airflow system for optimal climate control.
Operating Instructions
- Preheating: Allow the incubator to preheat for at least 1 hour before placing eggs inside. This stabilizes the internal temperature and humidity.
- Egg Placement: Carefully place fertilized eggs onto the egg tray. Ensure the pointed end of the egg faces downwards for optimal development. The incubator accommodates 18 standard chicken/duck eggs or 40 smaller quail/parrot eggs.
- Temperature Control: The incubator features precision temperature control. The intelligent alarm system will notify you if temperatures deviate from the preset range.
- Press the 'SET' button once to view the current temperature setting.
- Press the '+' or '-' buttons to adjust the desired temperature. Hold 'SET' for 3 seconds to save.
- Automatic Humidity Management: The dual water bottles automatically maintain ideal humidity levels. Monitor the humidity percentage on the digital display.
- Automatic Egg Turning: The advanced auto-rotation system gently turns eggs every 2 hours. This mimics natural incubation.
- Important: Remove the egg turner gear 72 hours (3 days) before the expected hatch date to prevent over-turning during hatching.
- Integrated Egg Candler: Use the built-in LED candler to monitor egg development.
- Press the 'LIGHT' button (usually the '-' button pressed once) to activate the candler.
- Place an egg over the light to observe internal development.
- Smart Alarm System: The incubator is equipped with an alarm system for temperature and humidity fluctuations. Familiarize yourself with the alarm thresholds in the user manual.
Figure 4: The automatic egg turning feature, which rotates eggs every 120 minutes. Remember to remove the turner gear 3 days before hatching.
Figure 5: The smart alarm system provides instant alerts for temperature and humidity fluctuations outside the preset range.
Figure 6: Recommended incubation parameters for various poultry species.
Video 1: Demonstration of the Onsju 18 Egg Incubator's automatic egg turning and humidity control features.
Maintenance
Regular cleaning is crucial for maintaining hygiene and optimal performance of your incubator.
- Disconnect the incubator from the power source before cleaning.
- Wipe the surface of the top cover with a soft, damp cloth and a mild disinfectant.
- Ensure all electrical components remain dry during the cleaning process. Do not immerse any electrical components in water.
- After each hatch, thoroughly clean the egg tray and base to prevent bacterial growth and odors.
Troubleshooting
If you encounter any issues or have questions regarding your Onsju 18 Egg Incubator, please refer to the user manual or contact customer support.
- Humidity Issues: If humidity levels are difficult to maintain, ensure water bottles are properly filled and sealed. Check for any blockages in the water delivery system.
- Temperature Fluctuations: Ensure the incubator is placed in a stable environment away from drafts or direct heat sources. Verify the power connection is secure.
- Egg Turning Malfunction: Ensure the egg turner gear is correctly installed and connected. If the auto-turning stops prematurely, verify the hatch day settings.
Specifications
| Feature | Detail |
|---|---|
| Model Number | incubator-18td |
| Capacity | 18 standard eggs (chicken/duck), 40 smaller eggs (quail/parrot) |
| Dimensions (L x W x H) | 12.57 x 12.2 x 6.02 inches |
| Item Weight | 4 Pounds |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Special Features | 360° View, Auto Egg Turn, Built-in Candler, Monitor Humidity, Temperature Control |
| Included Components | Removable Tray, User Manual, Power Supply |
Warranty
This product comes with a 2-year warranty. Please refer to the warranty details provided in the user manual for specific terms and conditions.
Customer Support
If you encounter any issues or have questions regarding your Onsju 18 Egg Incubator, please refer to the user manual or contact our customer support team for assistance.