Good Smile G18047

Good Smile Company Nendoroid Plamo Hatsune Miku Figure Instruction Manual

Model: G18047

1. Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Good Smile Company Nendoroid Plamo Hatsune Miku Figure. This product is a plastic model kit designed for assembly, allowing you to create a detailed representation of Hatsune Miku.

Assembled Nendoroid Plamo Hatsune Miku figure standing on a black base, facing forward with a cheerful expression.

Image 1.1: Assembled Nendoroid Plamo Hatsune Miku figure.

2. Safety Information

Warning: This product contains small parts. Keep away from small children as these parts may pose a choking hazard. Adult supervision is recommended during assembly.

Handle all parts with care to avoid injury. Do not ingest any parts or accessories.

3. Package Contents

Before beginning assembly, please verify that all components are present in the package:

  • Hatsune Miku Figure parts (on plastic runners)
  • Display Base
  • Support Arm for display base
  • Instruction Sheet (typically included in the box)
Plastic runners with various parts for the Nendoroid Plamo Hatsune Miku figure, including teal hair pieces, black body parts, and light pink face and hand parts.

Image 3.1: Unassembled figure parts on plastic runners.

4. Assembly Instructions

Follow these steps to assemble your Nendoroid Plamo Hatsune Miku figure:

  1. Prepare Your Workspace: Ensure you have a clean, well-lit area. You may need a hobby knife or nippers to carefully remove parts from the plastic runners.
  2. Remove Parts: Carefully cut or twist each part from its runner. Use a hobby knife to trim any excess plastic (nubs) for a smooth finish.
  3. Assemble Body Components: Begin by assembling the torso, arms, and legs according to the included instruction sheet. Pay attention to the orientation of each piece.
  4. Assemble Head and Hair: Attach the face plate to the front hair piece, then connect the back hair piece. Insert the neck joint into the head.
  5. Attach Accessories: Connect any smaller accessories, such as the tie or arm sleeves, as indicated in the instructions.
  6. Connect Head to Body: Gently attach the assembled head to the body.
  7. Assemble Display Base: Insert the support arm into the display base.
  8. Attach Figure to Base: Connect the figure to the support arm via the designated port on the figure's back.
Assembled Nendoroid Plamo Hatsune Miku figure from a slight angle, showing details of her outfit and twin tails.

Image 4.1: Assembled figure ready for display.

5. Operating and Display

Your Nendoroid Plamo figure features articulated joints, allowing for various poses. Use the included display base and support arm to maintain stability.

  • Posing: Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent damage.
  • Base Usage: Always use the display base and support arm to prevent the figure from falling, especially when posing dynamically.
  • Interchangeable Parts: If your kit includes interchangeable face plates or hand parts, carefully remove and replace them as needed. Store unused parts safely.
Assembled Nendoroid Plamo Hatsune Miku figure with one arm slightly raised, demonstrating posability.

Image 5.1: Figure posed on its display base.

6. Maintenance

Proper care will ensure the longevity of your figure:

  • Cleaning: Dust the figure regularly with a soft brush or a dry, lint-free cloth. For stubborn dirt, lightly dampen a cloth with water and gently wipe the surface. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the figure away from direct sunlight, high humidity, and extreme temperatures, as these can cause discoloration or material degradation.
  • Handling: Always handle the figure by its main body, avoiding excessive pressure on delicate parts or joints.

7. Troubleshooting

If you encounter any issues with your figure, refer to the following common solutions:

  • Loose Joints: If a joint feels loose, carefully remove the part. Apply a very small amount of clear nail polish or a specialized joint-tightening solution to the peg and allow it to dry completely before reattaching.
  • Parts Not Fitting: Ensure that you are attempting to connect the correct parts and that they are oriented correctly. Check for any excess plastic (nubs) that may be preventing a snug fit and carefully trim if necessary. Do not force parts together.
  • Figure Instability: Verify that the display base and support arm are securely assembled and attached to the figure. Adjust the figure's pose to ensure its center of gravity is balanced.
  • Discoloration: If discoloration occurs, it may be due to prolonged exposure to sunlight or certain chemicals. Preventative measures are key, as discoloration is often irreversible.

8. Specifications

  • Model Number: G18047
  • Brand: Good Smile Company
  • Character: Hatsune Miku
  • Material: Plastic
  • Color: Multicolor
  • Dimensions (L x W x H): Approximately 7.6 cm x 15.2 cm x 10.2 cm
  • Included Elements: Figure parts, Display Base, Support Arm
  • Assembly Required: Yes

9. Warranty and Support

For product support, inquiries regarding missing parts, or manufacturing defects, please contact Good Smile Company customer service directly. Please retain your proof of purchase for any warranty claims or support requests.

Good Smile Company contact information can typically be found on their official website or on the product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.