Introduction
The JOYO MW-2 2.4GHz Wireless Microphone System is designed to convert wired microphones into a professional wireless setup. It offers plug-and-play functionality, optimized for dynamic microphones, and is compatible with condenser microphones requiring 24V or lower phantom power. This system ensures high-fidelity audio transmission for various applications, including live sound, recording, and streaming.
Image: The JOYO MW-2 Wireless Microphone System, showing both the transmitter and receiver units.
What's in the Box
- Wireless Transmitter (1 unit)
- Wireless Receiver (1 unit)
- USB Cable (1 unit)
Image: Contents of the JOYO MW-2 package, including the transmitter, receiver, USB cable, and user manual.
Setup
Charging the Units
Before first use, ensure both the transmitter and receiver units are fully charged. Use the provided USB cable to connect the units to a 5V USB power source. The LED battery indicators will show charging progress and full charge status.
Image: Illustration of the MW-2 units showing battery level indicators and charging via USB-C ports.
A full charge takes approximately 2 hours and provides 6-8 hours of continuous use.
Connecting the Transmitter and Receiver
- Connect the MW-2 transmitter to the XLR output of your microphone.
- Connect the MW-2 receiver to the MIC input of your audio device (e.g., mixer, PA system, audio interface, camera).
Image: Diagram illustrating the plug-and-play setup, connecting the transmitter to a microphone and the receiver to a device's MIC input.
The system is designed for auto-pairing. Once powered on, the transmitter and receiver will automatically establish a connection.
Phantom Power for Condenser Microphones
The MW-2 supports condenser microphones requiring 24V or lower phantom power. To activate phantom power, locate the 48V switch on the transmitter and set it to the 'ON' position.
Image: Close-up showing the phantom power switch on the MW-2 transmitter, indicating its use for condenser microphones.
For optimal performance, dynamic microphones are recommended. Some condenser models may experience noise due to electromagnetic interference or microphone shielding variations.
Operating Instructions
Powering On/Off
Locate the ON/OFF switch on both the transmitter and receiver units. Slide the switch to 'ON' to power on the devices. Slide to 'OFF' to power them down.
2.4GHz Auto-Frequency Hopping
The MW-2 system utilizes 2.4GHz auto-frequency hopping technology to ensure stable and interference-free transmission. This allows for a reliable connection up to 100 feet (30 meters) in open environments.
Image: Graphic illustrating the 2.4GHz band and auto-channel switch for stable connection within 100ft/30m.
Up to 4 simultaneous MW-2 systems can be used in one area without significant interference.
Audio Quality
The system provides 24-bit/48kHz lossless audio quality, ensuring high-fidelity sampling and uncompressed, studio-grade sound for professional applications.
Image: Visual representation of studio-grade audio transmission with dual-channel synchronization and 24-bit/48kHz lossless sampling.
Versatile Applications
The JOYO MW-2 system is suitable for a wide range of uses:
- Stage Performances
- Conference Recording
- Live Streaming & Vlogging
- Studio Production
Image: Collage showing the MW-2 system being used in different scenarios: stage performances, conference recording, live streaming/vlogging, and studio production.
Image: Diagram illustrating universal connectivity, showing the MW-2 connected to a camera for wireless recording and to a mixer/audio equipment for conventional use.
Maintenance
Battery Care
To prolong battery life, avoid fully discharging the units frequently. Charge them regularly, especially if they will be stored for extended periods. Use only the provided USB cable or a compatible 5V USB charger.
Cleaning and Storage
Wipe the units with a soft, dry cloth. Do not use abrasive cleaners or solvents. Store the system in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent sound |
|
|
| Noise or hum with condenser microphone |
|
|
| Units not charging |
|
|
Specifications
| Feature | Detail |
|---|---|
| Item Weight | 2.54 ounces |
| Product Dimensions | 4.13 x 0.98 x 2.09 inches |
| Country of Origin | China |
| Item Model Number | JOYO-00MW2-BLACK |
| Batteries | 2 Product Specific batteries required (included) |
| Body Material | ABS |
| Color Name | Black |
| Connector Type | USB Type C, XLR |
| Hardware Interface | Radio Frequency |
| Material Type | Acrylonitrile Butadiene Styrene (ABS) |
| Wireless Microphone Frequency | 2.4 GHz |
| Battery Type | Polymer |
| Power Source | Battery Powered |
| Special Feature | Plug and play, 2.4GHz, Indicator light, 4 Channels auto-hopping technology, Anti-interference |
Safety Information
Please read and adhere to the following safety guidelines:
- Handle batteries with care.
- Avoid using near other wireless devices to prevent interference.
- Do not expose to extreme temperatures or humidity.
Warranty and Support
Specific warranty details are not provided in this manual. For warranty information, technical support, or service inquiries, please visit the official JOYO website or contact their customer service directly.
You can also visit the JOYO Store on Amazon for additional resources and contact information.
Product Video
Video: An official product video demonstrating the features and setup of the JOYO MW-2 Wireless Microphone System.