Gritin 10.2-inch Under Cabinet Lighting

1. Product Overview

The Gritin 10.2-inch Under Cabinet Lighting system provides a versatile and efficient lighting solution for various indoor spaces. Equipped with 84 super bright LEDs, this rechargeable light offers customizable illumination with adjustable color temperatures, multiple brightness levels, and intelligent operational modes, including a responsive motion sensor. Its sleek design and magnetic installation ensure seamless integration and ease of use in your home.

Image: Two Gritin under cabinet lights in silver, highlighting their super bright LEDs, 5 light levels, 3 color temperatures, motion sensor, magnetic attachment, dimmable feature, and rechargeable battery. Inset images show warm, natural, and white light options.

2. What's in the Box

Your Gritin Under Cabinet Lighting package includes:

• Cabinet lights x 2
• Type-C charging cables x 2
• Adhesive iron plates x 6
• Screws x 6
• Instruction manual x 1

3. Specifications

4. Setup & Installation

The Gritin Under Cabinet Lights are designed for easy installation with two primary methods:

Method 1: Magnetic Attachment (Recommended for most surfaces)

The lights feature built-in strong magnets. For iron surfaces, simply attach the light directly. For non-metallic surfaces, use the included adhesive iron plates.

1. Clean the installation area thoroughly to ensure it is free from dust and debris.
2. Align the adhesive iron plates with the magnetic points on the back of the light.
3. Peel off the protective film from the adhesive backing of the iron plates.
4. Firmly press the light with the attached iron plates onto the desired surface (e.g., under a cabinet, inside a closet).

Image: Illustration of magnetic attachment. On iron surfaces, the light attaches directly. On non-iron surfaces, adhesive iron plates are first applied to the surface, then the light magnetically attaches to the plates. Steps for applying adhesive plates are shown.

Method 2: Screw Installation (For permanent or extra sturdy mounting)

For a more permanent fixture, the included screws can be used with the adhesive iron plates.

1. Identify the mounting location and mark two points ensuring the spacing matches the width of the light body.
2. Drill small pilot holes at the marked locations.
3. Insert the included expansion anchors into the holes (if needed for drywall).
4. Attach the adhesive iron plates to the surface using the provided screws.
5. Mount the cabinet light onto the installed iron plates magnetically.

Image: Step-by-step guide for installing the light using adhesive iron plates. Steps include cleaning the surface, aligning with magnet location, peeling off the sticker, and pressing to secure.

5. Operating Instructions

The Gritin Under Cabinet Light features intuitive controls for adjusting light color and brightness.

Adjusting Color Temperature:

The light offers 3 color temperatures to suit different needs and moods:

• Warm Light (3000K): Ideal for cozy spaces, creating a relaxing atmosphere.
• Natural Light (4500K): A balanced mixed light for versatile use.
• White Light (6000K): Perfect for task lighting, providing clear and bright illumination.

To switch between color temperatures, simply press the Temperature Button (often marked with a thermometer icon or light bulb icon). The light has a memory function and will recall the last selected color temperature upon reactivation.

Image: Visual representation of the three color temperatures (Warm, Natural, White) and the location of the Light Color Switch Button on the device.

Adjusting Brightness:

The light offers 5 preset brightness levels and stepless dimming for precise control.

• Short Press: Quick press the Dimming Button (often marked with a sun icon) to cycle through 5 brightness levels: 10%, 25%, 50%, 75%, and 100%.
• Long Press: Hold the Dimming Button for 3 seconds to activate stepless dimming, allowing you to fine-tune the brightness to your desired level.

Image: Demonstration of the 5 brightness levels (100%, 75%, 50%, 25%, 10%) and the stepless dimming function, along with the location of the Dimming Button.

6. Modes & Settings

The motion sensor lights support four distinct modes to adapt to various occasions and energy-saving preferences.

• OFF Mode: The light is completely off.
• Night Sensing Mode: The light activates only when motion is detected in darkness. It automatically turns off after 20 seconds of no motion.
• Daytime Sensing Mode: The light activates whenever motion is detected, regardless of ambient light conditions (dark or bright). It automatically turns off after 20 seconds of no motion.
• Always On Mode: Provides continuous and stable lighting, remaining on until manually switched off or battery depletes.

To switch between modes, use the slider switch located on the light unit. The motion sensor features a 120° wide sensing angle and a 3M/10FT detection distance.

Image: Visual guide to the four operational modes of the light, illustrating their typical use cases.

Image: Depiction of the smart motion sensor in action, showing its wide sensing angle and detection range, and the automatic 20-second auto-off feature when no motion is detected.

7. Charging & Battery Life

The Gritin Under Cabinet Light is equipped with a built-in 1800mAh high-capacity rechargeable battery, offering long-lasting performance.

• Charging: Use the provided Type-C charging cable to recharge the light. The charging port is located on the side of the unit.
• Charging Indicator: A red light indicates the battery is charging. A green light indicates the battery is fully charged.
• Battery Life:
  • Up to 8 hours in high brightness "Always On" mode.
  • Lasts 7-45 days in motion sensor mode, depending on usage frequency.

It is recommended to fully charge the lights before their first use. For optimal battery longevity, recharge the unit every 3 months if unused for extended periods.

Image: Close-up of the light unit highlighting the 1800mAh rechargeable battery, USB-C charging port, and the red (charging) and green (fully charged) indicator lights.

8. Maintenance

To ensure the longevity and optimal performance of your Gritin Under Cabinet Lights, follow these simple maintenance guidelines:

• Cleaning: Wipe the light surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Battery Care: As mentioned in the Charging section, if the light will not be used for an extended period (e.g., more than 3 months), recharge it fully to maintain battery health.
• Storage: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Exposure: This product is not water-resistant. Avoid exposing it to water or high humidity environments.

9. Troubleshooting

If you encounter any issues with your Gritin Under Cabinet Light, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Gritin customer support for further assistance.

10. Warranty & Support

Gritin products are manufactured with quality and reliability in mind. While specific warranty details may vary by region or retailer, generally, products are covered by a limited warranty against defects in materials and workmanship from the date of purchase.

For warranty claims, technical support, or any product-related inquiries, please contact the seller or Gritin customer service through the platform where you purchased the product. Please have your purchase receipt and product model number (G1358) ready when contacting support.

For more information, visit the official Gritin store: Gritin Store on Amazon