Instruction Manual

1. Product Overview

This filter set is designed to replace the HEPA and Activated Carbon filters in compatible Sharp air purifiers. It helps to maintain optimal air quality by capturing airborne particles and odors.

The set includes a HEPA filter, an Activated Carbon filter, and a Pre-filter, working in conjunction to provide multi-stage filtration.

2. Package Contents

Please verify that all items are present in the package:

• 1 x HEPA Filter (Approx. 450x250x38mm)
• 1 x Activated Carbon Filter (Approx. 450x250x10mm)
• 1 x Pre-filter (Approx. 450x250x3mm)

3. Compatibility

This filter set is compatible with the following Sharp Air Purifier models:

• Sharp FP-J60TA
• Sharp FP-J80TA
• Sharp FP-J60
• Sharp FP-J80

Always refer to your air purifier's original manual for specific filter replacement instructions and compatibility details.

4. Setup and Installation

Follow these general steps to replace the filters in your compatible Sharp air purifier. Specific steps may vary slightly by model.

1. Power Off and Unplug: Before attempting any filter replacement, ensure your air purifier is turned off and unplugged from the power outlet.
2. Access Filter Compartment: Locate and open the filter compartment cover on your air purifier. This is typically on the back or front panel.
3. Remove Old Filters: Carefully remove the used pre-filter, activated carbon filter, and HEPA filter. Dispose of them according to local regulations.
   

   Image: The three filter types included in the set, shown layered.
4. Install New Filters: Insert the new filters in the correct order. The typical order is: Pre-filter (first layer), Activated Carbon Filter, then HEPA Filter (last layer, closest to the fan).
   

   Image: Individual HEPA and Activated Carbon filters.

   • Pre-filter: This is the outermost layer, designed to capture larger particles like dust and pet hair.
   • Activated Carbon Filter: This layer is designed to absorb odors, gases, and volatile organic compounds (VOCs).
   • HEPA Filter: This is the primary filtration layer, capturing 99.97% of airborne particles as small as 0.3 microns, including pollen, dust mites, mold spores, and pet dander.
5. Close Cover and Power On: Securely close the filter compartment cover. Plug the air purifier back into the power outlet and turn it on.
6. Reset Filter Indicator (if applicable): Many air purifiers have a filter replacement indicator light. Refer to your air purifier's manual for instructions on how to reset this indicator after installing new filters.

5. Operating Principles

Once installed, these filters work as part of your air purifier's system to clean the air. Air is drawn into the unit, passes through the multi-stage filtration system, and then clean air is released back into the room.

• Pre-filtration: Captures large airborne particles, extending the life of the subsequent filters.
• Activated Carbon Filtration: Adsorbs common household odors, smoke, and harmful gases.
• HEPA Filtration: Traps microscopic allergens and pollutants, improving overall air quality.

6. Maintenance and Replacement

Regular filter replacement is essential for maintaining the efficiency and effectiveness of your air purifier. The lifespan of the filters depends on usage, air quality, and environmental factors.

• Pre-filter: This filter can often be gently vacuumed or wiped clean periodically to remove accumulated dust and debris. Do not wash.
• Activated Carbon Filter & HEPA Filter: These filters are not washable and should be replaced when their effectiveness diminishes or when indicated by your air purifier.

Recommended Replacement Schedule:

• For optimal performance, it is generally recommended to replace the HEPA and Activated Carbon filters every 6-12 months.
• If your air purifier has a filter replacement indicator, follow its guidance.
• Replace filters sooner if you notice a decrease in air purification performance, increased odors, or if the filters appear heavily soiled.

7. Troubleshooting

If you experience issues after replacing your filters, consider the following:

• Air Purifier Not Turning On: Ensure the filter compartment cover is securely closed. Many air purifiers have a safety switch that prevents operation if the cover is open or not properly latched.
• Reduced Airflow or Odors Persist:
  • Verify that the filters are installed in the correct order and orientation.
  • Check if the pre-filter is clogged and needs cleaning.
  • Ensure the new filters are genuine and compatible with your model.
• Filter Indicator Light Still On: Remember to manually reset the filter life indicator on your air purifier after replacement, if applicable. Refer to your air purifier's user manual for specific instructions on resetting the indicator.

8. Specifications

9. Safety Information

• Always unplug the air purifier before replacing filters.
• Do not wash the HEPA or Activated Carbon filters.
• Keep filters out of reach of children.
• Dispose of used filters responsibly according to local waste disposal guidelines.

10. Warranty and Support

For warranty information or technical support regarding your IYZPCTMC filter set, please contact the seller or manufacturer directly through the platform where the purchase was made. Please retain your proof of purchase for any warranty claims.

For issues related to your Sharp air purifier, please refer to the air purifier's original manufacturer's support channels.