Important Safety Information
Read all instructions carefully before assembly and use. Keep this manual for future reference.
Anti-Tip Safety
To prevent serious injury, this furniture must be securely attached to the wall with the anti-tip device provided.
- Never allow children to climb or hang on drawers, doors, or shelves.
- Place the heaviest items in the lowest drawers.
- Do not place heavy objects on top of the dresser unless it is anchored to the wall.
- Always use the anti-tip restraint kit provided.
General Safety Precautions
- Ensure all parts are present before assembly.
- Do not use power tools for assembly unless specifically instructed, as overtightening can damage the product.
- Assemble on a soft, clean surface to prevent scratches.
- Keep small parts away from children.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
The package typically includes:
- Dresser panels (top, bottom, sides, back)
- Drawer components (fronts, sides, backs, bottoms)
- Pre-installed drawer slides
- Hardware pack (screws, dowels, cam locks, anti-tip kit)
- Assembly instructions (this manual)
Assembly Instructions
Assembly is required for this product. It is recommended that two people assemble this dresser for ease and safety.
Estimated Assembly Time: Approximately 1-2 hours.
Step 1: Prepare the Area
Clear a spacious, clean, and soft area for assembly to prevent damage to the furniture.
Step 2: Attach Side Panels to Base
Secure the side panels to the base frame using the provided hardware. Ensure proper alignment.
Step 3: Install Back Panel
Fasten the back panel to the assembled frame.
Step 4: Assemble Drawers
Each drawer consists of a front, back, two sides, and a bottom. The drawer slides are pre-installed on the dresser frame, significantly reducing assembly time for the drawers themselves.
Figure 1: Pre-installed drawer slides simplify assembly.
Step 5: Insert Drawers
Carefully slide the assembled drawers into the pre-installed rails on the dresser frame. Ensure they operate smoothly.
Figure 2: Fully assembled 6-drawer dresser.
Step 6: Install Anti-Tip Kit
Securely attach the anti-tip device to the back of the dresser and to a wall stud, following the instructions provided with the kit. This is a critical safety step.
Operating Instructions
Using the Drawers
The dresser features six smooth-gliding drawers. To open, gently pull the top edge of the drawer front. To close, push firmly until the drawer is fully seated.
Figure 3: Product dimensions and drawer capacity details.
Each drawer is designed to hold approximately 20 lbs. The tabletop can support up to 130 lbs.
Figure 4: Curved profile design and hidden handles.
The hidden handle design allows for a streamlined look while providing easy access.
Maintenance
Cleaning
Wipe the dresser with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
General Care
- Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary.
- Avoid exposing the dresser to direct sunlight or extreme temperature changes, which can cause warping or fading.
- Use coasters or protective pads under items placed on the tabletop to prevent scratches.
Troubleshooting
Drawers do not slide smoothly
Ensure the drawer slides are clean and free of debris. Check that the drawers are correctly aligned on their tracks. If issues persist, verify all assembly hardware is securely tightened.
Dresser feels unstable
Confirm that the anti-tip device is properly installed and secured to a wall stud. Ensure the dresser is placed on a level surface. Adjust furniture levelers if applicable.
Minor Scratches or Blemishes
For minor surface imperfections, touch-up pens or furniture markers matching the grey finish can be used.
Specifications
| Feature | Detail |
|---|---|
| Brand | SOLACE FURNITURE |
| Model Name | A6DD-01A |
| Product Dimensions | 15.7"D x 47"W x 32"H |
| Color | Grey |
| Room Type | Bedroom, Hallway, Living Room |
| Furniture Finish | Wood |
| Assembly Required | Yes |
| Item Weight | 105 Pounds |
| Max Drawer Load | 20 lbs |
| Max Tabletop Load | 130 lbs |
Warranty Information
SOLACE FURNITURE products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official SOLACE FURNITURE website.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact SOLACE FURNITURE customer support.
You can also visit the official SOLACE FURNITURE store on Amazon for more information and products: SOLACE FURNITURE Amazon Store.
Product Videos
Modern 6 Drawer Dresser Overview
This video provides a comprehensive overview of the Modern 6 Drawer Dresser, showcasing its design, features, and functionality.
Modern Nightstand with Drawer Storage and Open Compartment (Preview)
This short preview video highlights the features of a complementary Modern Nightstand with drawer storage and an open compartment, also from SOLACE FURNITURE.
