User Manual: Fossibot F112 Pro Phone Case and Screen Protector Kit

Product Overview

This kit provides comprehensive protection for your Fossibot F112 Pro (6.88") smartphone. It includes a durable silicone phone case, a high-transparency tempered glass screen protector, and an adjustable 360° phone ring holder. Designed for a precise fit, this kit safeguards your device from daily wear and tear, scratches, and impacts.

Image: Complete kit including the clear silicone case, tempered glass screen protector, and adjustable ring holder.

Package Contents

• 1 x Clear TPU Phone Case for Fossibot F112 Pro (6.88")
• 1 x Tempered Glass Protective Film
• 1 x Tool Bag (typically includes cleaning wipes and dust removal stickers)
• 1 x Adjustable 360° Phone Ring Holder

Setup and Installation

1. Installing the Silicone Phone Case

The silicone case is designed for easy installation and removal, providing a snug fit while protecting your device.

1. Gently insert the top edge of your Fossibot F112 Pro phone into the top of the silicone case.
2. Carefully snap the remaining corners of the phone into the case, ensuring all edges are properly seated and the case fits snugly around the device.

Image: Illustrates the soft and flexible nature of the silicone case, making it easy to install and remove without damaging the phone.

Image: Shows the precise cutouts of the case, ensuring easy access to all buttons and ports of the phone.

2. Installing the Tempered Glass Screen Protector

Proper installation of the screen protector is crucial for optimal protection and clarity.

1. Clean the Screen: Before installation, use the cleaning wipes provided in the tool bag to thoroughly clean your phone's screen. Ensure no dust, smudges, or fingerprints remain.
2. Dry the Screen: Use a dry cloth (also typically included in the tool bag) to completely dry the screen. A dry, lint-free surface is essential.
3. Remove Dust: Use the dust removal stickers to pick up any remaining dust particles from the phone screen. Inspect carefully under good lighting.
4. Align and Apply: Carefully peel off the protective layer from the tempered glass. Align the screen protector precisely with your phone's screen, paying attention to the edges, camera, and speaker cutouts.
5. Gentle Press: Once aligned, gently lower the screen protector onto the phone screen. It will naturally adhere. If air bubbles appear, gently press from the center outwards to push them to the edges.

Image: Demonstrates the high clarity of the tempered glass screen protector once applied to the phone screen.

Image: Highlights that the screen protector is designed to be slightly smaller than the screen to ensure compatibility with phone cases, preventing lifting or bubbling.

Operating Instructions

Using the Phone Case

The silicone case provides a comfortable grip and protects your phone from daily impacts and scratches. Its precise cutouts ensure full access to all buttons, ports, and the camera without needing to remove the case.

Image: A hand holding a phone with the clear case, emphasizing how it allows the original phone design to show through.

Image: Illustrates the anti-yellowing material of the case, designed to maintain its clear appearance over time compared to other clear cases.

Using the Adjustable Phone Ring Holder

The included phone ring holder enhances grip and provides a convenient kickstand function.

• Attachment: The ring holder typically has an adhesive backing. Clean the desired area on the back of your phone or phone case, peel off the protective film, and firmly press the holder into place. Allow adhesive to set for a few hours before heavy use.
• 360° Rotation: The finger ring can be rotated 360 degrees, allowing you to find the most comfortable grip or viewing angle for your hand.
• 180° Foldable: The ring can also be folded 180 degrees, enabling it to function as a kickstand for hands-free viewing of videos or video calls in both portrait and landscape orientations.

Image: Displays the dimensions and various adjustable positions of the phone ring holder, including its use as a kickstand.

Maintenance

To ensure the longevity and appearance of your phone case and screen protector, follow these simple maintenance guidelines:

• Cleaning the Case: The silicone case can be cleaned with a soft, damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive materials that could damage the silicone.
• Cleaning the Screen Protector: Use a microfiber cloth to gently wipe the tempered glass screen protector. For stubborn smudges, a screen cleaning solution designed for electronics can be used.
• Avoid Extreme Temperatures: Do not expose the products to extreme heat or cold, as this may affect the material integrity.
• Handle with Care: While the products offer protection, avoid unnecessary drops or impacts to maximize their lifespan.

Troubleshooting

Here are some common issues and their solutions:

• Air Bubbles Under Screen Protector: If small bubbles remain after installation, try gently pushing them towards the nearest edge with a soft cloth or a credit card wrapped in cloth. For larger bubbles, you may need to carefully lift a corner of the protector and reapply, ensuring no dust is trapped.
• Case Not Fitting Properly: Ensure your phone model is indeed the Fossibot F112 Pro (6.88"). Double-check that all corners of the phone are fully seated within the case.
• Ring Holder Not Sticking: Ensure the surface where the ring holder is applied is clean, dry, and free of dust or oils. Apply firm pressure for a few seconds and allow the adhesive to cure for several hours before putting stress on it.

Specifications

Customer Support

If you encounter any issues or have questions regarding your Fossibot F112 Pro Phone Case and Screen Protector Kit, please do not hesitate to contact our customer service team. We are committed to providing a satisfactory solution to any concerns you may have.

Please refer to your purchase documentation or the retailer's website for specific contact information.