AIFEI JW1-01 Dimmable Adjustable Height Candle Warmer Lamp User Manual

1. Introduction

Thank you for choosing the AIFEI JW1-01 Dimmable Adjustable Height Candle Warmer Lamp. This product utilizes a heated bulb to melt jar candles from the top down, releasing fragrance without an open flame. It features adjustable brightness, a timer function, and an adjustable height to accommodate various candle sizes, providing a safe and convenient way to enjoy your favorite scents.

Image 1.1: The AIFEI Candle Warmer Lamp in CoalBlack, shown with a candle on a wooden surface.

2. Important Safety Instructions

• Read all instructions before use.
• Do not operate with a damaged cord or plug. If the cord or plug is damaged, contact customer support immediately.
• Use only with specified bulbs. This lamp uses GU10 Halogen Bulbs (50W). Using incorrect bulbs may cause damage or fire.
• Keep out of reach of children and pets. The bulb and surrounding area can become hot during operation.
• Place on a stable, flat, heat-resistant surface. Ensure the lamp is not near flammable materials.
• Do not immerse the lamp in water or any other liquid.
• Unplug the lamp before cleaning or changing the bulb. Allow the bulb to cool completely before handling.
• Do not leave the lamp unattended for extended periods. Utilize the timer function for added safety.

Image 2.1: The AIFEI Candle Warmer Lamp highlighting its fire-free operation for safety.

3. Package Contents

Please check the package for the following items:

• 1 x AIFEI Candle Warmer Lamp (CoalBlack)
• 2 x GU10 Halogen Bulbs (50W)
• 1 x User Manual

Image 3.1: Visual representation of the lamp's components, including the glass lampshade, sturdy base, adjustable pole, anti-slip mat, two 50W bulbs, and the timer/dimmer control.

4. Setup Guide

1. Unpack the Lamp: Carefully remove all components from the packaging.
2. Install the Bulb: Gently insert one of the provided GU10 halogen bulbs into the socket located inside the glass lampshade. Twist clockwise until secure.
3. Position the Lamp: Place the lamp on a stable, flat, and heat-resistant surface. Ensure the anti-slip mat on the base provides good grip.
4. Place Your Candle: Position your jar candle directly on the center of the lamp's base.
5. Adjust Pole Height: Loosen the adjustment knob on the pole and slide the lamp head up or down to ensure the bulb is approximately 1-2 inches above the candle wax. Tighten the knob to secure the height.
6. Connect to Power: Plug the power cord into a standard electrical outlet.

Image 4.1: Step-by-step visual guide for assembling and setting up the candle warmer lamp.

5. Operating Instructions

5.1 Power On/Off

• Press the power button (ⓘ) on the inline control switch to turn the lamp on or off.

5.2 Brightness Adjustment (Dimmer)

• Use the '+' and '-' buttons on the inline control switch to adjust the brightness of the bulb.
• Higher brightness settings will melt the candle wax faster and release fragrance more quickly.
• Lower brightness settings provide a softer light and a slower, more subtle fragrance release.

Image 5.1: Illustration of the four brightness levels (25%, 50%, 75%, 100%) and their effect on the lamp's illumination.

Image 5.2: The inline control switch demonstrating the timer and dimmer functionalities.

5.3 Timer Function

• Press the timer button (⏱) on the inline control switch to set an automatic shut-off time.
• Available timer settings are 2 hours, 4 hours, and 8 hours. The indicator lights on the switch will show the selected duration.
• The lamp will automatically turn off after the set time has elapsed.

Image 5.3: The timer function allows setting the lamp to turn off automatically after 2, 4, or 8 hours.

5.4 Adjustable Height

• To adjust the height, loosen the knob on the vertical pole.
• Slide the lamp head up or down to position the bulb appropriately for your candle size.
• Ensure the bulb is close enough to the candle (approximately 1-2 inches) for effective melting, but not touching the wax or jar.
• Tighten the knob firmly to secure the lamp head at the desired height.

Image 5.4: The lamp features an adjustable height mechanism to accommodate various candle sizes.

6. Maintenance

6.1 Cleaning

• Always unplug the lamp from the power outlet before cleaning.
• Allow the lamp and bulb to cool completely.
• Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• For the glass lampshade, a slightly damp cloth can be used, followed by a dry cloth to prevent water spots.

6.2 Bulb Replacement

• Ensure the lamp is unplugged and the bulb is cool to the touch.
• Gently twist the glass lampshade counter-clockwise to remove it.
• Carefully remove the old GU10 halogen bulb by twisting it counter-clockwise.
• Insert a new GU10 halogen bulb (50W) into the socket and twist clockwise until secure.
• Reattach the glass lampshade by twisting it clockwise until it is firmly in place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact AIFEI customer service directly. Our team is committed to providing solutions within 24 hours for any issues you may encounter.

You can often find contact details on the official AIFEI website or through your purchase platform.