1. Introduction
Thank you for choosing the Homleke Narrow Side Tables. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Designed for small spaces, these tables offer a convenient surface and integrated magazine storage, perfect for living rooms, bedrooms, or offices.
Image 1: The Homleke Narrow Side Table in a living room setting.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Keep all small parts and packaging materials away from children and pets to prevent choking hazards.
- Assemble the product on a soft, clean surface to avoid scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.
- Do not overload the table or the magazine holder. Refer to the specifications for weight limits.
- Avoid placing hot items directly on the tabletop without protective coasters.
- Do not stand or climb on the table.
3. Package Contents
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- A. Tabletop (2x)
- B. Bottom Shelf (2x)
- C. Side Frames (4x)
- D. Magazine Holder Basket (2x)
- E. Adjustable Feet (8x)
- F. Screws and Allen Wrench
Image 2: Key components and features of the Homleke Side Table.
4. Assembly Instructions
Assembly is straightforward and typically takes 15-30 minutes per table. A second person may be helpful but is not required.
- Attach Adjustable Feet: Screw the adjustable feet (E) into the pre-drilled holes at the bottom of each side frame (C). Do not overtighten.
- Assemble Frame: Connect two side frames (C) to one tabletop (A) using the provided screws (F). Ensure the holes align correctly. Lightly tighten screws initially.
- Attach Bottom Shelf: Connect the bottom shelf (B) to the assembled side frames (C) using the remaining screws (F). Ensure the shelf is oriented correctly to support the magazine holder.
- Insert Magazine Holder: Place the magazine holder basket (D) onto the bottom shelf (B). The basket is designed to fit snugly and can be removed for cleaning or repositioning.
- Final Tightening: Once all parts are in place and aligned, fully tighten all screws using the Allen wrench (F).
- Level the Table: Place the assembled table in its desired location. Adjust the adjustable feet (E) by rotating them until the table is stable and level on uneven floors.
Image 3: Detail of the adjustable feet for stability.
5. Usage
These narrow side tables are designed for versatility and functionality in compact spaces.
- Placement: Ideal for placement beside sofas, beds, armchairs, or in hallways where space is limited.
- Tabletop: Use the tabletop for drinks, remote controls, lamps, picture frames, or small decorative items.
- Magazine Holder: The integrated iron mesh basket is perfect for organizing books, magazines, tablets, or other frequently accessed items, keeping your space tidy. The fencing helps prevent items from falling out.
Image 4: Demonstrating the table's perfect fit for small spaces.
Image 5: Detail of the magazine holder with fencing.
6. Care and Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean spills immediately to prevent staining, especially on the particleboard tabletop.
- Protection: Use coasters under drinks and placemats under hot items to protect the tabletop.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Environment: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect the material's integrity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven floor or loose connections | Adjust the leveling feet at the bottom of the table. Ensure all screws are securely tightened. |
| Parts are missing or damaged | Packaging error or shipping damage | Do not proceed with assembly. Contact Homleke customer support for replacement parts. |
| Difficulty assembling | Incorrect alignment or overtightened screws | Review the assembly instructions carefully. Loosen screws slightly to adjust alignment, then re-tighten. Ensure parts are oriented correctly. |
8. Specifications
- Brand: Homleke
- Model: ET19H
- Dimensions (D x W x H): 7.1" x 16.9" x 23.6" (18 cm x 43 cm x 60 cm)
- Item Weight: Approximately 10.5 Pounds (4.76 kg) per table
- Frame Material: Metal (Alloy Steel)
- Top Material: Engineered Wood (Particleboard)
- Color: Black
- Number of Items: 2 (Set of 2 tables)
- Assembly Required: Yes
- Indoor/Outdoor Usage: Indoor only
Image 6: Product dimensions overview.
9. Warranty and Support
Homleke stands behind the quality of its products. For any questions, concerns, or assistance with your Narrow Side Tables, please contact Homleke customer support through the retailer's platform or the official Homleke website. Please have your purchase details and model number (ET19H) ready when contacting support.