AUTOUTLET Wii to HDMI Converter 1080P (Model EFU139) Instruction Manual

Introduction

This manual provides comprehensive instructions for the AUTOUTLET Wii to HDMI Converter, designed to connect your Nintendo Wii or Wii U console to modern HDMI-compatible displays such as HDTVs, monitors, and projectors. This converter transforms analog signals into a full digital HDMI format, ensuring clear video and audio output without transmission loss.

Key Features

• HD Output Compatibility: Supports 1080P Full HD output for clear, lossless video and audio.
• Full Wii Display Mode Support: Compatible with NTSC 480i, 480p, and PAL 576i display modes.
• Plug and Play: No additional drivers or complex settings required for immediate use.
• Reinforced Cable Design: Features multi-layer shielding for enhanced interference resistance and durability, reducing flickering and signal drops.
• Integrated Design: Built-in Wii game machine interface and HDMI male plug, eliminating the need for additional cables.
• Wide Compatibility: Works with Wii, Wii U, HDTVs, monitors, and projectors.

Important Notes and Compatibility

• Wii Mini Incompatibility: This converter is NOT COMPATIBLE with the Wii Mini console, as the Wii Mini only features an AV interface and lacks a Wii interface.
• Display Mode Setting: Some displays may auto-set screen resolution to 480i instead of 480p, which might not support games at 240p/480i over HDMI. If this occurs, switch your Wii to 480p mode for optimal performance.
• Direct Connection: For best results, connect the converter directly to your TV, monitor, or projector. It is not designed to be connected to a switch or splitter.

Setup Instructions

Follow these steps to connect your Wii console to an HDMI display:

1. Connect to Wii Console: Insert the Wii game console connector end of the AUTOUTLET converter into the corresponding port on the back of your Nintendo Wii or Wii U console.
   

   Image: The Wii connector end of the cable being inserted into the Wii console's video output port.

2. Connect to HDMI Display: Plug the HDMI male cable output of the converter into an available HDMI input port on your HDTV, monitor, or projector.
   

   Image: The HDMI end of the converter cable being plugged into an HDMI port on the back of a television.
3. Select HDMI Input: Power on your display and use its remote control or menu to select the corresponding HDMI input channel (e.g., HDMI 1, HDMI 2) where the converter is connected.

   Video: Demonstrates connecting the AUTOUTLET Wii to HDMI Converter to a Wii console and then to a TV, followed by selecting the correct HDMI input on the TV to display the Wii's output. This video is provided by AUTOUTLET.

4. Power On Wii: Turn on your Wii console. The video and audio should now be displayed on your HDMI screen.

Operating Instructions

Once connected, the AUTOUTLET Wii to HDMI Converter operates automatically. No additional software or power supply is needed.

• Automatic Conversion: The converter automatically transforms the Wii's analog video and audio signals into a digital HDMI format.
• Display Modes: The converter supports all standard Wii display modes (NTSC 480i, 480p, PAL 576i). Ensure your Wii's display settings are configured as desired for your display.
• Audio Output: Audio is embedded within the HDMI signal, providing both video and audio through a single cable.

Image: Children playing a Wii game on a modern flat-screen TV, with the AUTOUTLET converter connected to the Wii console and the TV's HDMI port, illustrating the "Plug and Play" functionality.

Troubleshooting

• No Signal or Black Screen:
  • Ensure the converter is securely plugged into both the Wii console and the HDMI input of your display.
  • Verify that your display is set to the correct HDMI input channel.
  • Confirm that your Wii console is powered on.
• Poor Picture Quality or Flickering:
  • Check your Wii's display settings. If your display auto-sets to 480i, try manually switching the Wii to 480p mode.
  • Ensure the cable is not bent or damaged. The reinforced design helps prevent this, but physical damage can affect signal quality.
  • Avoid connecting the converter through a switch or splitter; a direct connection is recommended.
• No Audio:
  • Confirm that your display's volume is not muted or set too low.
  • Ensure the HDMI cable is fully inserted into both the converter and the display.
• Wii Mini Does Not Work:
  • The AUTOUTLET Wii to HDMI Converter is not compatible with the Wii Mini due to its different AV interface.

Specifications

Maintenance

The AUTOUTLET Wii to HDMI Converter requires minimal maintenance. To ensure longevity and optimal performance:

• Keep the cable and connectors clean and free from dust.
• Avoid sharp bends or kinks in the cable to prevent internal damage.
• Store the converter in a cool, dry place when not in use.

Warranty and Support

For warranty information or technical support, please contact AUTOUTLET directly or visit their official store page.

Manufacturer: AUTOUTLET

Official Store: AUTOUTLET Amazon Store