1. Introduction
Thank you for choosing the AMERLIFE 47.2" 8-Drawer Dresser. This modern high-gloss dresser is designed to enhance your bedroom, living room, or dressing room with its functional storage and elegant features. It includes a transparent glass tabletop, two six-grid jewelry drawers, and integrated LED lighting with adjustable modes. This manual provides essential information for safe assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
2. Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in injury or product damage.
- Assembly: This product requires multi-step self-assembly. Two persons are recommended for assembly. Ensure all parts are present and undamaged before beginning.
- Anti-Tipping Device: Always install the included anti-tipping device to prevent the dresser from falling, especially in households with children. Securely fasten it to a wall stud.
- Weight Capacity: Do not overload drawers or the tabletop. Distribute weight evenly.
- Placement: Place the dresser on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.
- Electrical Safety (LED Lights): Ensure the LED light power supply is connected to an appropriate power source. Do not attempt to modify the electrical components.
- Glass Tabletop: Handle the glass tabletop with care to avoid breakage. Do not place excessively heavy or hot items directly on the glass.

Figure 1: Key features including the anti-tipping device for safety.
3. Package Contents
Before assembly, verify that all components listed in your product's packing list are present and undamaged. If any parts are missing or damaged, contact customer service immediately.
Note: The exact number and type of fasteners may vary slightly. Refer to the detailed assembly diagram provided with your product.
4. Assembly Instructions
Assembly is required for this dresser. Follow the step-by-step instructions provided in the separate assembly manual included with your purchase. A general overview of the assembly process is as follows:
- Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Identify each part using the labels.
- Assemble the Frame: Connect the side panels, back panel, and base according to the diagrams.
- Install Drawer Slides: Attach the drawer slides to the inner frame of the dresser.
- Assemble Drawers: Construct each of the eight drawers, ensuring the bottom panels are securely in place.
- Insert Drawers: Carefully slide the assembled drawers onto their respective slides.
- Attach Handles: Secure the polished mirror metal handles to each drawer front.
- Place Glass Tabletop: Position the transparent glass tabletop securely on the top surface of the dresser.
- Install LED Lighting: Adhere the LED light strip to the designated area under the glass tabletop and connect the power supply.
- Secure Anti-Tipping Device: Fasten the anti-tipping device to the back of the dresser and to a wall stud using appropriate hardware.
Tools required: Phillips head screwdriver, hammer (not included).

Figure 2: Product dimensions for planning placement.
5. Operating Instructions
5.1. LED Lighting System
The dresser features an integrated LED lighting system with three adjustable modes, controlled by a remote.
- Power On/Off: Use the power button on the remote control to turn the LED lights on or off.
- Change Lighting Mode: Press the mode selection button on the remote to cycle through the three available lighting modes:
- 3000K Warm Light: For a cozy and inviting ambiance.
- 4000K Natural Light: A balanced light suitable for daily tasks.
- 6000K Cool Light: Bright, clear light ideal for detailed work or selecting jewelry.
- Brightness Adjustment: Use the brightness control buttons on the remote to increase or decrease the light intensity.

Figure 3: Remote control for LED lighting modes.
5.2. Drawers
The dresser includes six large drawers and two six-grid jewelry drawers under the glass tabletop. All drawers feature anti-slip and smooth tracks for easy opening and closing.
- Opening/Closing: Gently pull or push the polished mirror metal handles to open or close the drawers. Avoid forcing them.
- Jewelry Drawers: The two top drawers with six grids are designed for organized storage of jewelry, watches, and small accessories. The transparent glass tabletop allows for easy viewing.
- Large Drawers: The six lower drawers provide ample space for clothing, linens, and other personal items.

Figure 4: Tempered glass tabletop and six-grid jewelry drawers.

Figure 5: Ample storage capacity with eight drawers.
6. Maintenance
Proper care will ensure the longevity and appearance of your AMERLIFE dresser.
- Cleaning the Surface: The high-gloss finish is waterproof and easy to clean. Use a soft, damp cloth with a mild, non-abrasive cleaner. Wipe dry immediately to prevent water spots.
- Cleaning Glass Tabletop: Use a glass cleaner and a soft cloth to clean the glass surface. Avoid harsh chemicals that may damage the finish.
- Drawer Maintenance: Periodically check drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
- Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, ammonia-based products, or solvents, as these can damage the finish.
7. Troubleshooting
If you encounter any issues with your dresser, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not open/close smoothly. | Misaligned drawer slides, debris in tracks, loose fasteners. | Check alignment of slides, clean tracks, tighten all fasteners. Apply silicone lubricant if needed. |
| LED lights are not working. | Power cable disconnected, remote control battery dead, faulty LED strip. | Ensure power cable is securely plugged in. Replace remote control battery. Contact customer service if the LED strip is faulty. |
| Dresser feels unstable. | Loose assembly, not placed on a level surface, anti-tipping device not installed. | Retighten all assembly screws. Move dresser to a level surface. Install the anti-tipping device as per instructions. |
| Scratches or marks on high-gloss surface. | Abrasive cleaning, sharp objects. | Use only soft cloths and non-abrasive cleaners. For minor scratches, specialized furniture polish may help. |
If the problem persists after attempting these solutions, please contact AMERLIFE customer service for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AMERLIFE |
| Model Name | CNS089 |
| Product Dimensions | 15.8"D x 47.2"W x 34.6"H |
| Color | Cream & Grey |
| Material | Engineered Wood |
| Finish Type | High Gloss Paint |
| Number of Drawers | 8 (6 large, 2 six-grid jewelry drawers) |
| Lighting | Integrated LED with 3 modes (Warm, Natural, Cool) and remote control |
| Tabletop | Transparent Glass |
| Item Weight | 116.8 Pounds |
| Assembly Required | Yes |
9. Warranty and Support
AMERLIFE products are manufactured with quality and care. For information regarding warranty coverage, returns, or customer support, please refer to the warranty card included with your purchase or visit the official AMERLIFE website. Our customer service team is available to assist with any questions or concerns you may have.
For quick assistance, please have your model number (CNS089) and purchase date available when contacting support.
10. Product Overview Video
Watch this video for a visual overview of the AMERLIFE 8-Drawer Dresser with LED Light and Glass Tabletop, showcasing its features and functionality.
Video: Glossy 8 Drawers Dresser with LED Light & Glass Tabletop by Happy Tao.





