1. Introduction
Thank you for choosing the TTK 3-in-1 Convertible Sleeper Chair Bed. This versatile furniture piece is designed to provide comfort and functionality, serving as a sofa, lounge chair, and a sleeper bed. It features integrated USB ports, a cup holder, and a phone stand for enhanced convenience. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your product.
2. Safety Information
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight limit of 300 lbs (136 kg).
- Keep children and pets away during assembly to prevent injury.
- Avoid placing hot items directly on the fabric.
- Do not stand or jump on the chair bed.
- Use caution when converting the chair bed to avoid pinching fingers or other body parts.
3. Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Main Sofa Frame
- Pull-out Bed Mechanism
- Backrest Cushion
- Seat Cushion
- Pillow
- Armrests with integrated USB ports, cup holder, and phone stand attachment point
- Assembly Hardware (screws, bolts, washers)
- Assembly Tools (Allen wrench, etc.)
- Instruction Manual
4. Setup and Assembly Instructions
Assembly is required for this product. All necessary tools are included. It is recommended to assemble the chair bed with two people.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Armrests: Secure the armrests to the main sofa frame using the provided hardware. Ensure they are firmly attached.
- Install Pull-out Mechanism: Connect the pull-out bed mechanism to the main frame according to the diagrams in the separate assembly guide.
- Place Cushions: Position the seat and backrest cushions onto the frame.
- Final Check: Verify that all screws and bolts are tightened. Ensure the chair bed is stable before use.
Figure 4.1: Dimensional diagram of the chair bed, illustrating various measurements for assembly and placement.
5. Operating Instructions
5.1. Converting the Chair Bed (3-in-1 Functionality)
The TTK Convertible Sleeper Chair Bed can be easily transformed between three modes: sofa, lounge chair, and sleeper bed.
- Sofa Mode: The chair is in its upright, compact position, ideal for seating.
- Lounge Chair Mode: To convert from sofa to lounge chair, gently pull the front section of the seat outwards. The integrated mechanism will extend, creating a comfortable leg rest.
- Sleeper Bed Mode: To fully extend into a sleeper bed, continue pulling the front section until it is completely flat and aligned with the main seat, forming a continuous sleeping surface.
Figure 5.1: The chair bed configured as a compact sofa, suitable for seating in small spaces.
Figure 5.2: The chair bed transitioning from sofa to lounge mode, with the leg rest partially extended.
Figure 5.3: The chair bed fully converted into a flat sleeper bed, providing a comfortable sleeping surface.
5.2. Adjusting the Backrest
The backrest offers three adjustable angles for personalized comfort: 105°, 135°, and 180° (flat).
- To Recline: Gently push the backrest backward to the desired angle. You will feel it lock into place at each preset position.
- To Return Upright: Push the backrest forward until it clicks into the upright 105° position.
Figure 5.4: Hands demonstrating the adjustment of the backrest, which can be set to multiple angles.
5.3. Using Integrated Features
The chair bed includes convenient features built into the armrests.
- USB and Type-C Charging Ports: Located on the side of the armrest, these ports allow you to charge your electronic devices. Connect your device's charging cable to the appropriate port.
- Cup Holder: A metal cup holder is integrated into the armrest, providing a secure place for beverages.
- Phone Stand: An adjustable phone stand attachment point is available on the armrest, allowing you to position your phone for hands-free viewing.
Figure 5.5: Detail of the integrated USB charging ports and cup holder, designed for user convenience.
Figure 5.6: The flexible phone stand in use, providing hands-free viewing for a smartphone.
6. Maintenance
6.1. Fabric Care (Velvet)
- Regular Cleaning: Vacuum the velvet fabric regularly using a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can damage the velvet pile. For stubborn stains, use a mild, water-free solvent or dry-cleaning product specifically designed for velvet. Test on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading.
6.2. Frame and Mechanism Care
- Wipe Down: Periodically wipe the metal frame and wooden components with a soft, damp cloth. Dry immediately.
- Lubrication: If the conversion mechanism becomes stiff, apply a small amount of silicone-based lubricant to the moving parts.
- Check Fasteners: Periodically check and tighten all screws and bolts to ensure stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty converting between modes | Mechanism is stiff or obstructed. | Ensure no objects are blocking the mechanism. Apply silicone lubricant to moving parts if necessary. |
| Chair bed feels unstable | Loose fasteners or uneven floor. | Check and tighten all screws and bolts. Ensure the chair bed is on a level surface. |
| USB ports not charging | Power source issue or faulty cable. | Ensure the chair bed's power cable (if applicable) is properly connected to a working outlet. Try a different charging cable or device. |
| Backrest does not lock into position | Mechanism obstruction or damage. | Check for any obstructions. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TTK |
| Model Number | B0DZP3G84N |
| Color | Black |
| Material | Velvet Fabric, Metal Frame, Foam, Solid Wood |
| Upholstery Fabric Type | Velvet |
| Fill Material | High-density rebound sponge (Foam) |
| Product Dimensions (Sofa) | 35.43"L x 33.85"W x 31.1"H |
| Product Dimensions (Lounge/Bed) | 68.5"L x 35.4"W x 31.1"H |
| Seat Depth | 33.85 inches |
| Seat Height | 18.2 Inches |
| Weight Limit | 300 Pounds |
| Item Weight | 73.19 Pounds |
| Seating Capacity | 1 |
| Adjustable Backrest Positions | 3 (105°, 135°, 180°) |
| Additional Features | USB ports, Type-C port, Cup Holder, Phone Stand, Side Pockets |
| Assembly Required | Yes (Tools Included) |
9. Warranty and Support
TTK stands behind the quality of its products. For any questions, concerns, or assistance with your 3-in-1 Convertible Sleeper Chair Bed, please contact our dedicated customer service team. We are committed to ensuring your complete satisfaction.
Please refer to your purchase documentation or the retailer's website for specific warranty terms and contact information.
