Introduction
Thank you for choosing the SONGMICS Ergonomic Office Chair OBN041L01. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.
This ergonomic chair is designed to provide comfort and support during long hours of work, featuring adaptive lumbar support, a breathable double-layer mesh fabric, and an adjustable headrest.
Image: The SONGMICS Ergonomic Office Chair OBN041L01 in beige, positioned in a modern home office environment, highlighting its design and adjustable features.
Setup Instructions
Assembly of your SONGMICS office chair is designed to be straightforward and can typically be completed by one person in 15 to 30 minutes. Follow the steps below:
- Step 1: Assemble the gas lift, base, and casters. Ensure all casters are securely inserted into the base.
- Step 2: Attach the armrests and seat cushion. Align the holes and fasten with the provided screws.
- Step 3: Install the mechanism plate to the underside of the seat cushion.
- Step 4: Assemble all remaining elements, including the backrest and headrest, to complete the chair structure.
Image: A visual guide illustrating the four main assembly steps for the office chair, from attaching the base and casters to the final assembly of all components.
Refer to the included accessory kit and numbered parts for detailed guidance.
Operating Instructions
Adaptive Lumbar Support
The chair features an independent, curved, and adaptive lumbar support. This support automatically adjusts to your movements, conforming to the natural curve of your lower back and providing continuous support.
Image: A close-up view of the chair's adaptive lumbar support, showing its curved design and how it moves to provide dynamic back support.
Adjustable Headrest
The headrest can be adjusted in both height and tilt to accommodate users of different heights and preferences, ensuring optimal neck and head support.
- Height Adjustment: Lift or push down the headrest to set your desired height.
- Tilt Adjustment: Angle the headrest forward or backward for personalized comfort.
Image: Illustrations demonstrating the headrest's adjustability, showing a 6 cm height range and a 20-degree tilt capability.
Reclining Function
Activate the backrest's rocking function using the lever located under the seat. This allows you to recline and relax, transitioning easily from an upright working posture to a more relaxed position.
- Working Position: Maintain a 90° upright angle for focused work.
- Relaxation Position: Recline up to 115° for a comfortable break.
Image: A comparison showing a person sitting in the chair at a 90° angle for working and a 115° angle for relaxing, illustrating the chair's recline function.
Flip-Up Armrests
The armrests can be flipped up 90°, allowing you to slide the chair completely under your desk when not in use. This feature helps save space in your home or office. The soft padding on the armrests provides optimal support for your arms.
Image: A visual demonstrating the chair's flip-up armrests, showing how they can be raised 90 degrees to allow the chair to be pushed under a desk, saving approximately 1 square meter of space.
Maintenance
- Cleaning: Wipe the mesh fabric and other surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary to maintain stability and safety.
- Casters: Keep the casters clean from hair and debris to ensure smooth movement.
Troubleshooting
- Squeaking Noises: If the chair squeaks, check all bolted connections and tighten them. A small amount of silicone spray on moving parts may also help.
- Difficulty Adjusting Height: Ensure the gas lift lever is fully engaged or disengaged. If the issue persists, the gas lift may need replacement.
- Chair Feels Unstable: Verify that all components are correctly assembled and all screws are securely tightened. Ensure the chair is on a flat, even surface.
Specifications
Image: Detailed diagram showing the dimensions of the SONGMICS Ergonomic Office Chair OBN041L01, including height, width, depth, seat dimensions, and maximum load capacity of 120 kg.
| Feature | Detail |
|---|---|
| Model Number | OBN041L01 |
| Dimensions (L x W x H) | 64 x 71.5 x 116-135 cm |
| Seat Dimensions | 48 cm (W) x 50 cm (D) |
| Item Weight | 13 Kilograms |
| Recommended Maximum Load | 120 Kilograms |
| Materials | Steel, Polyester Fabric, Foam Padding, Nylon, Plywood |
| Color | Beige Sable |
| Back Style | Mesh Back (Double-layer breathable) |
| Special Feature | Ergonomic, Adaptive Lumbar Support, Adjustable Headrest, Flip-up Armrests |
| Assembly Required | Yes |
| Number of Tilt Positions | 4 |
Warranty and Support
Your SONGMICS Ergonomic Office Chair OBN041L01 comes with a standard manufacturer's warranty. Please refer to the specific warranty terms provided at the time of purchase or contact your retailer for details.
For technical support, missing parts, or any questions regarding your product, please contact the seller or manufacturer directly. Keep your purchase receipt and model number (OBN041L01) handy when contacting support.
You can visit the official SONGMICS store for more information and product range: SONGMICS Store
