B0DZ1SD5J4

Professional Noise Reduction Earmuffs User Manual

Model: B0DZ1SD5J4

1. Introduction

This manual provides essential information for the proper use, maintenance, and care of your Professional Noise Reduction Earmuffs. Please read this manual thoroughly before using the product to ensure optimal performance and safety. These earmuffs are designed to provide superior hearing protection in various noisy environments.

Professional Noise Reduction Earmuffs, black and red, angled view

Figure 1: Professional Noise Reduction Earmuffs, showcasing the black and red design with an adjustable headband.

2. Product Features

Earmuffs resting on a wooden desk next to documents and a coffee cup

Figure 2: Earmuffs in a typical use environment, demonstrating their compact design when not in use.

3. Setup and Adjustment

To ensure maximum comfort and effective noise reduction, proper setup and adjustment are crucial.

  1. Unfold Earmuffs: Gently unfold the earmuffs from their compact position.
  2. Adjust Headband: Place the earmuffs over your ears. Slide the ear cups up or down along the metal wires until the headband rests comfortably on the top of your head and the ear cups fully enclose your ears, creating a snug seal.
  3. Check Seal: Ensure there are no gaps between the ear cups and your head. Hair, eyeglasses, or other objects can interfere with the seal and reduce noise attenuation.
Front view of the noise reduction earmuffs

Figure 3: Front view of the earmuffs, illustrating the ear cup design and headband structure.

4. Operating Instructions

These earmuffs are passive hearing protection devices and do not require power. Their operation is straightforward:

Angled view of the noise reduction earmuffs

Figure 4: Angled view of the earmuffs, highlighting the comfortable ear cushions and robust construction.

5. Maintenance and Care

Proper maintenance ensures the longevity and effectiveness of your earmuffs.

Side view of the noise reduction earmuffs

Figure 5: Side view of the earmuffs, showing the profile of the ear cups and the adjustable headband mechanism.

6. Troubleshooting

If you experience issues with your earmuffs, consider the following:

ProblemPossible CauseSolution
Reduced Noise ReductionPoor seal around ears, damaged ear cushions, or improper fit.Re-adjust earmuffs to ensure a tight seal. Check ear cushions for wear or damage and replace if necessary. Ensure no hair or objects interfere with the seal.
Discomfort During WearHeadband too tight or loose, ear cups not positioned correctly.Adjust the headband for a comfortable, yet secure, fit. Ensure ear cups are centered over your ears.
Earmuffs Slip OffHeadband too loose or not properly adjusted.Tighten the headband slightly by adjusting the ear cups upwards until a secure fit is achieved.
Top view of the noise reduction earmuffs

Figure 6: Top view of the earmuffs, showing the padded headband and the connection points to the ear cups.

7. Specifications

AttributeValue
Product Dimensions7.5 x 4.5 x 8 inches; 12 ounces
Departmentunisex-adult
Date First AvailableMarch 3, 2025
ASINB0DZ1SD5J4
Fabric typeAbs Plastic With Foam Padding
Care instructionsWipe Clean With Damp Cloth, Store In Dry Place, Avoid Extreme Temperatures
OriginImported
Table showing attenuation data for earmuffs tested according to EN 352-1:2020, ANSI S3.19-1974, and AS/NZS 1270:2002 standards

Figure 7: Attenuation data table, providing detailed noise reduction performance metrics across various frequencies according to international standards.

EU Type-Examination Certificate for the earmuffs

Figure 8: EU Type-Examination Certificate, confirming compliance with European safety and health requirements for personal protective equipment.

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Generic

Model: B0DZ1SD5J4

Documents - B0DZ1SD5J4 – B0DZ1SD5J4

no relevant documents