Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your VNAPARTS replacement washer drain pump. This pump is designed to restore proper water drainage in compatible Whirlpool, Maytag, and Kenmore washing machines, replacing original part numbers W11399437, W11259498, and W10536347. Please read this manual thoroughly before beginning any repair work.
Safety Information
- Disconnect Power: Always unplug the washing machine from the power outlet before attempting any repairs or maintenance.
- Water Shut-off: Turn off the water supply to the washing machine before starting work.
- Wear Protective Gear: Use gloves and eye protection to prevent injury.
- Drain Water: Ensure all water is drained from the washer tub and hoses before removing the pump.
- Professional Assistance: If you are unsure about any step, consult a qualified appliance technician.
Product Overview
The VNAPARTS washer drain pump is a critical component for removing water from your washing machine during wash and spin cycles. It is constructed from durable metal and plastic materials to ensure reliable performance.
Image 1: The VNAPARTS replacement washer drain pump, showing its overall design and connections.
Key Features:
- Direct replacement for OEM part numbers W11399437, W11259498, W10536347.
- Constructed with high-grade plastic and a robust motor for durability.
- Designed for efficient water removal and quiet operation.
- Easy to install with basic tools.
Specifications:
Image 2: Detailed product dimensions of the drain pump, including length, width, and height.
| Specification | Value |
|---|---|
| Brand | VNAPARTS |
| Material | Metal and plastic |
| Product Dimensions | 5.57"L x 4.81"W x 2.69"H |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 80 watts |
| Item Weight | 1.5 pounds (0.68 Kilograms) |
| UPC | 739597582223 |
| Part Number | GTW325ASW |
Compatibility
This drain pump is compatible with a wide range of top-load washing machines from Whirlpool, Maytag, and Kenmore. It is crucial to verify your washer's model number to ensure proper fitment. This pump is a direct replacement for W11399437, W11259498, and W10536347.
Image 3: Visual guide to confirm the correct pump model, showing the distinct interfaces of the W11399437 pump versus the W10919003 pump.
Compatible Whirlpool Models:
- WTW5100HC1, WTW5000DW3, WTW5005KW0, WTW5010LW0, WTW5010LW1, WTW5015LW0, WTW5015LW1, WTW5057LW0, WTW5057LW1, WTW5100HC2, WTW5100HC3, WTW5100HW2, WTW5100HW3, WTW5105HC1, WTW5105HC2, WTW5105HW1, WTW5105HW2, WTW6120HC1, WTW6120HC3, WTW6120HW1, WTW6120HW3
- Also compatible with 8TWTW5010PW0, 8TWTW5010PW1, 8TWTW5057PW0, 8TWTW6000JW0, 8TWTW6000JW1, MVW4505MW0
Compatible Maytag Models:
- 7MMVWC565FW1, MVW6230HW2, MVW4505MW0, MVW4505MW1, MVW4505MW2, MVW5035MW0, MVW5035MW1, MVW5035MW2, MVW5430MW0, MVW5430MW2, MVW5430PBK0, MVW5430PBK1, MVW5435PBK0, MVW5435PBK1, MVW5435PW0, MVW6200KW1, MVW6200KW2, MVW6200KW3, MVW6230HC1, MVW6230HC3, MVW6230HW1, MVW6230RHW1, MVW6230RHW2, MVW6230RHW3, MVW6500MBK0, MVW6500MW0, MVWC565FW2, MVWC565FW3, MVWX655DW2
Compatible Kenmore Models:
- 11025132412, 11031312021, 11031312022
Image 4: The drain pump shown alongside a partial list of compatible washer models, emphasizing its broad applicability.
Installation Guide
Before You Begin:
- Gather Tools: You will typically need a screwdriver (Phillips and flathead), pliers, a bucket or shallow pan, and towels.
- Safety First: Ensure the washer is unplugged and water supply is off.
- Access the Pump: Depending on your washer model, you may need to tilt the washer back, remove the front panel, or access from the bottom. Consult your washer's specific service manual for access instructions.
- Drain Residual Water: Place a shallow pan or towels under the pump area to catch any remaining water in the hoses.
Step-by-Step Installation:
- Locate the Old Pump: Identify the existing drain pump. It is usually connected to the tub and drain hose.
- Disconnect Hoses: Use pliers to release the clamps on the inlet and outlet hoses connected to the pump. Carefully remove the hoses. Be prepared for some water to spill.
- Disconnect Wiring: Unplug the electrical connector from the old pump.
- Remove Old Pump: Depending on the model, the pump may be held in place by screws or clips. Remove these fasteners and carefully detach the old pump.
- Install New Pump: Position the new VNAPARTS drain pump in the same location as the old one. Secure it with the appropriate screws or clips.
- Connect Wiring: Plug the electrical connector firmly into the new pump.
- Connect Hoses: Reattach the inlet and outlet hoses to the new pump, securing them with the clamps. Ensure a tight seal to prevent leaks.
- Reassemble Washer: Reattach any panels or components that were removed to access the pump.
- Test Washer: Plug the washer back into the power outlet and turn on the water supply. Run a short drain/spin cycle to check for proper drainage and leaks.
Video 1: An official product video demonstrating the features and compatibility of the Washer Drain Pump 120V 60Hz for Whirlpool, Maytag, and Kenmore washing machines. This video provides a visual overview of the product.
Operating
Once the VNAPARTS drain pump is correctly installed, your washing machine should resume normal operation, effectively draining water during wash and spin cycles. No special operating procedures are required for the pump itself; its function is integrated into the washer's regular cycle programming.
After installation, run a test cycle with no laundry to ensure there are no leaks and that the water drains completely. Listen for any unusual noises during the drain cycle, which could indicate an issue with installation or a foreign object in the pump.
Maintenance
Regular maintenance can help extend the life of your drain pump and prevent future drainage issues:
- Check for Debris: Periodically inspect the pump's filter (if accessible on your washer model) and the pump's impeller for lint, coins, buttons, or other small items that can cause clogs or damage.
- Clean Hoses: Ensure the drain hoses are free of kinks and blockages.
- Avoid Overloading: Overloading the washer can strain the pump and other components.
- Use Proper Detergent: Use only high-efficiency (HE) detergent in HE washers to prevent excessive suds that can hinder drainage.
Troubleshooting
If you encounter issues after installing the new drain pump, refer to the common problems and solutions below:
Image 5: Visual representation of common symptoms indicating a faulty drain pump, such as water not draining, drainage error codes, long cycle times, and loud buzzing.
| Symptom | Possible Cause | Solution |
|---|---|---|
| Water Not Draining / Standing Water | Clogged drain hose or pump impeller, faulty wiring connection, pump not receiving power. | Check drain hose for kinks or blockages. Inspect pump impeller for debris. Verify electrical connections are secure. Ensure washer is plugged in and receiving power. |
| Drainage Error Codes (e.g., F9 E1) | Drain pump malfunction, clogged drain system. | Refer to your washer's manual for specific error code meanings. Often indicates a drain issue. Check for clogs in the pump or hoses. |
| Loud Buzzing or Unusual Noise During Drain | Object lodged in pump impeller, worn pump motor. | Disconnect power and inspect the pump impeller for foreign objects. If no object is found and noise persists, the pump motor may be failing. |
| Cycle Takes Too Long to Finish | Inefficient draining due to partial clog or weak pump. | Check for partial clogs in the drain system. Ensure the pump is operating at full capacity. |
If troubleshooting steps do not resolve the issue, it may indicate a more complex problem with your washing machine or a defective part. Contact customer support for further assistance.
Warranty and Support
The VNAPARTS Washer Drain Pump comes with a 2-Year Guarantee, ensuring quality and reliability. If you experience any issues with the product within this period, please contact VNAPARTS customer support for assistance.
For technical support, warranty claims, or general inquiries, please refer to the contact information provided with your purchase or visit the official VNAPARTS website.