1. Important Safety Information
Please read all instructions carefully before using the LEERCON WP-888-Black Massage Chair. Retain this manual for future reference.
- Electrical Safety: Ensure the power cord is securely plugged into a grounded outlet. Do not operate the chair with a damaged cord or plug. Keep the power cord away from heat sources.
- Usage Environment: Use the chair indoors on a level, stable surface. Avoid using in damp or wet environments.
- User Restrictions: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Medical Conditions: Consult a physician before use if you have any medical conditions, are pregnant, or have a pacemaker. Discontinue use if you experience discomfort.
- Weight Limit: The maximum load capacity for this chair is approximately 260 lbs (118 kg).
2. Package Contents
Verify that all components are present before beginning assembly:
- Main Massage Chair Unit
- Footrest Assembly
- Armrests (Left and Right)
- Headrest Cushion
- Lumbar Cushion
- Intelligent Controller
- Power Cord
- Assembly Hardware (screws, L-wrench)
- User Manual
3. Setup and Assembly
The LEERCON WP-888-Black Massage Chair requires assembly. Follow these general steps. For detailed diagrams, refer to the included assembly guide.
- Unpack Components: Carefully remove all parts from the packaging and place them on a soft, clean surface to prevent scratches.
- Attach Armrests: Secure the left and right armrests to the main chair unit using the provided hardware. Ensure they are firmly attached.
- Connect Footrest: Attach the footrest assembly to the main chair unit. Ensure all connection points are secure and the footrest can move freely as intended.
- Connect Electronic Cables: Carefully connect all electronic cables between the main chair unit, footrest, and armrests. Ensure connections are firm to avoid disconnections during use.
- Attach Cushions: Place the headrest and lumbar cushions onto the chair. The headrest is often adjustable or removable.
- Power Connection: Plug the power cord into the chair's power inlet and then into a suitable electrical outlet.
4. Operating Instructions
The LEERCON WP-888-Black Massage Chair is controlled via an intelligent handheld controller.
4.1 Powering On/Off
- To power on the chair, press the Power button on the controller. The indicator light will illuminate.
- To power off, press the Power button again.
4.2 Intelligent Controller Overview
The controller features clear English indicator buttons for ease of use:
- Power Button: Turns the chair on or off.
- Auto Button: Activates a pre-programmed automatic massage sequence.
- Manual Massage Buttons:
- Neck: Targets the neck area.
- Upper Back: Focuses on the upper back.
- Lower Back: Concentrates on the lower back.
- Full Back: Provides massage across the entire back.
- Kneading: Activates kneading massage technique.
- Tapping: Activates tapping massage technique.
- Spot Massage: Allows targeting a specific spot for massage.
- Vibration Button: Controls the hip vibration function.
- Heat Button: Activates or deactivates the waist and back heating function.
- Direction Control: (Implied by controller design) Adjusts the direction or position of massage rollers.
5. Massage Functions
The LEERCON WP-888-Black Massage Chair is equipped with a 4D mechanical movement system that provides comprehensive massage from the neck to the waist along an L-Track.
5.1 Massage Techniques
The chair offers a variety of massage techniques:
- Kneading: Circular motions to relieve muscle tension.
- Massage: General broad strokes.
- Acupressure: Targeted pressure on specific points.
- Back Pushing: Gentle pushing motions along the back.
- Beating: Rhythmic tapping motions.
- Kneading and Beating: A combination of both techniques for deeper relief.
6. Heating and Vibration Functions
6.1 Waist and Back Heating
The chair features a heating function for the waist and back, maintaining a temperature of approximately 45℃ (113°F) or 122°F as indicated in some materials. This warmth helps to:
- Relieve muscle tension.
- Promote blood circulation.
- Enhance the overall comfort and effectiveness of the massage.
6.2 High-Frequency Hip Vibration
A unique high-frequency vibration massage function is integrated into the hip area. This feature operates quietly, providing deep muscle relaxation.
7. Swinging Function
The LEERCON WP-888-Black Massage Chair includes a forward and backward swinging function. This feature allows users to enjoy a gentle rocking motion, enhancing relaxation and providing a leisure experience similar to a rocking chair, even after a massage session.
8. Maintenance
Proper maintenance ensures the longevity and optimal performance of your massage chair.
- Cleaning: Wipe clean with a damp cloth and water. Avoid harsh chemicals or abrasive cleaners that could damage the faux leather material.
- Storage: When not in use for extended periods, store the chair in a cool, dry place away from direct sunlight.
- Inspection: Periodically check the power cord and all connections for any signs of wear or damage.
- Moving the Chair: If moving the chair, ensure it is powered off and unplugged. Lift or roll carefully to avoid damage to the internal mechanisms or the chair's structure.
9. Troubleshooting
If you encounter issues with your LEERCON WP-888-Black Massage Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not power on. | Power cord not connected; outlet not working; power button not pressed. | Ensure power cord is securely plugged into chair and a working outlet. Press the power button firmly. |
| Massage functions are not working. | Chair not powered on; specific function not selected; internal connection issue. | Power on the chair. Select the desired massage function on the controller. Check for loose electronic connections if recently assembled. |
| Heating function is not working. | Heating function not activated; internal fault. | Ensure the heat button on the controller is pressed. Allow a few minutes for the heating elements to warm up. |
| Unusual noises during operation. | Loose components; obstruction; normal operating sound. | Check for any loose parts or obstructions. Some mechanical sounds are normal during operation. If the noise is loud or unusual, discontinue use and contact support. |
| Assembly difficulties. | Unclear instructions; misaligned parts; incorrect hardware. | Refer to the detailed assembly diagrams. Ensure parts are correctly oriented before tightening. Do not force components. Contact customer support if issues persist. |
If the problem persists after attempting these solutions, please contact LEERCON customer support for assistance.
10. Specifications
| Feature | Detail |
|---|---|
| Brand | LEERCON |
| Model Number | WP-888-Black |
| Model Name | 899-Black |
| Material Type | Faux Leather |
| Product Dimensions (L x W x H) | 96.52 x 63.5 x 111.76 cm (38 x 25 x 44 inches) |
| Item Weight | 25.85 kg (57 lbs) |
| Maximum Load | 260 lbs (118 kg) |
| Special Features | Arm Rest, Back Support, Upholstered Leather, Zero Gravity, 4D Mechanical Movement, L-Track, Shiatsu, Heating, Vibration, Swinging Function |
| Heating Temperature | Approx. 45℃ (113°F) / 122°F |
| Frame Material | Metal, Birch Wood Accents |
| Assembly Required | Yes |
11. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.