Introduction
Thank you for choosing the Sofiton 12IN LED Flush Mount Ceiling Light. This fixture provides adjustable color temperature (2700K-5000K) and dimmable brightness (10%-100%) to suit various lighting needs. Designed for easy installation and long-lasting performance, this manual provides essential information for safe setup, operation, and maintenance.
Image: Sofiton 12IN LED Flush Mount Ceiling Light showcasing its features including 15W power, 120V, 5 CCT options, 1000 lumens, 10-100% dimming, and 80+ CRI.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not modify the fixture or use it for purposes other than its intended use.
- Suitable for damp locations. Do not expose to direct water spray.
- Wear safety glasses and gloves during installation.
Package Contents
Verify that all components are present before beginning installation:
- LED Flush Mount Ceiling Light Fixture
- Wire Nuts (x3)
- Mounting Screws (x2)
- Instruction Manual
Image: A close-up of the ceiling light fixture showing its 12-inch diameter and 3-inch height, along with the included wire nuts and mounting screws.
Specifications
| Brand | Sofiton |
| Model Number | IP-DR12-15W-5CCT-6PK |
| Size | 12 inches |
| Wattage | 15 Watts |
| Brightness | 1000 Lumens |
| Voltage | 120V |
| Color Temperature | 2700K-5000K (Adjustable) |
| Dimming Range | 10%-100% (Triac/ELV Dimmable) |
| Material | Steel & Acrylic |
| Lifespan | 50,000 hours |
| Certifications | ETL Listed |
| Dimensions (L x W x H) | 12"L x 12"W x 3"H |
Setup (Installation)
Follow these steps for safe and proper installation:
- Prepare for Installation: Turn off power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.
- Connect Wires: Connect the fixture wires to the junction box wires using the provided wire nuts. Typically, black to black (live), white to white (neutral), and ground to ground. Carefully tuck the connected wires into the junction box.
- Mount the Fixture Base: Align the fixture base with the junction box and secure it to the ceiling using the provided mounting screws. Ensure the base is firmly attached.
- Install the Diffuser Shade: Place the diffuser shade onto the fixture base, twisting or securing it according to the design until it is snug.
- Attach Frame (if applicable): If your model includes an outer frame, attach it and tighten any screws or nuts to secure it.
- Restore Power: Once installation is complete, restore power at the circuit breaker.
Image: Visual guide showing the four main steps for installation: connecting wires, mounting the fixture base, installing the diffuser shade, and attaching the frame.
Operating Instructions
1. Adjusting Color Temperature (CCT)
The fixture features a 5-CCT adjustable switch located on the back of the light. Before mounting the fixture, select your desired color temperature:
- 2700K: Soft White
- 3000K: Warm White
- 3500K: Natural White
- 4000K: Cool White
- 5000K: Daylight
Note: The CCT switch must be set before the fixture is fully installed. Once installed, you cannot change the CCT without dismounting the fixture.
Image: Visual representation of the five adjustable color temperatures (2700K Soft White to 5000K Daylight) and the CCT switch on the back of the light.
2. Dimming Functionality
This LED ceiling light is compatible with most modern Triac/ELV dimmers, allowing for smooth dimming from 10% to 100%. Use a compatible dimmer switch to adjust the light output to your preferred brightness level.
Recommended Dimmers:
- Lutron: DVCL-153PR, CTCL-153PDH-WH, TGCL-153PH-WH, P-PKGIW=WH-R
- Leviton: DVCL-153PR, CTCL-153PDH-WH, TGCL-153PH-WH, P-PKGIW=WH-R
- EATON: SAL06P-LA-K
Image: A room scene demonstrating the light dimming from 10% to 100% brightness, with a list of compatible dimmer switches.
Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents as they may damage the finish or electrical components.
- Bulb Replacement: This fixture uses integrated LED components and does not require bulb replacement.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
| Incorrect color temperature. |
|
|
Applications
The Sofiton 12IN LED Flush Mount Ceiling Light is suitable for various indoor damp locations, providing versatile lighting for different areas of your home.
Kitchen Lighting
Laundry Room Lighting
Bedroom Lighting
Warranty and Support
This Sofiton LED Flush Mount Ceiling Light is covered by a 5-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Sofiton customer service. Please have your model number (IP-DR12-15W-5CCT-6PK) and proof of purchase available when contacting support.
For more information, visit the Sofiton Store on Amazon.