Aesfee AF-8098K All-in-One Grooming Kit User Manual

1. Introduction

Thank you for choosing the Aesfee AF-8098K All-in-One Grooming Kit. This versatile device is designed to meet all your personal grooming needs, including hair clipping, beard trimming, body grooming, nose hair removal, and precise shaving. Please read this manual carefully before first use to ensure safe and optimal performance.

2. Safety Instructions

• Keep the appliance dry. Do not immerse the charging dock in water.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Only use the charger provided with the appliance.
• Do not use the appliance if the blades are damaged or broken, as this may cause injury.
• Always check the blades before use.
• Unplug the appliance before cleaning.
• Do not disassemble the appliance beyond what is instructed in this manual.

3. Product Overview

The Aesfee AF-8098K Grooming Kit includes a main trimmer unit and various interchangeable heads and accessories for different grooming tasks.

Figure 1: Overview of the Aesfee AF-8098K Grooming Kit with its charging dock and various attachments.

Components:

• Main Trimmer Unit with LED Display
• Hair Clipper Head with Adjustable Comb (0.5mm - 20mm)
• Beard Trimmer Head with Adjustable Comb (0.5mm - 20mm)
• Precision Trimmer Head
• Nose & Ear Trimmer Head
• Body Groomer Head
• Foil Shaver Head
• USB-C Charging Dock
• Cleaning Brush
• Lubricating Oil

4. Setup and Charging

4.1 Initial Charge

Before first use, fully charge the grooming kit. Connect the USB-C cable to the charging dock and plug it into a compatible USB power adapter (not included). Place the main trimmer unit onto the charging dock. The LED display will show the battery percentage, indicating charging progress. A full charge takes approximately 1.5 hours and provides up to 100 minutes of cordless operation.

4.2 Attaching/Detaching Heads

To attach a head, align the head with the main unit and push it down until it clicks into place. To detach, hold the main unit firmly and pull the head upwards.

Figure 2: The various interchangeable heads and guide combs for different grooming needs.

5. Operating Instructions

Ensure your skin and hair are clean and dry before trimming, unless using the device for wet shaving (foil shaver). Press the power button to turn the device on/off. The LED display shows battery status and travel lock indicator.

5.1 Hair and Beard Trimming

1. Attach the desired hair clipper or beard trimmer head.
2. Adjust the cutting length by rotating the dial on the comb attachment. The settings range from 0.5mm to 20mm.
3. Start trimming against the direction of hair growth for an even cut. Use slow, controlled movements.

Figure 3: Using the beard trimmer head to achieve a precise beard line.

Figure 4: The adjustable comb allows for precise length settings from 0.5mm to 20mm.

5.2 Body Grooming

1. Attach the body groomer head.
2. Gently glide the trimmer over the desired areas. The skin-friendly design helps prevent irritation.

Figure 5: The body groomer head is designed for comfortable trimming on various body areas.

5.3 Nose and Ear Hair Trimming

1. Attach the nose and ear trimmer head.
2. Carefully insert the trimmer tip into your nostril or ear canal. Move it gently to trim unwanted hair.

Figure 6: The nose and ear trimmer provides safe and efficient hair removal.

5.4 Foil Shaving

1. Attach the foil shaver head.
2. For a close shave, move the shaver gently against the direction of hair growth. Can be used wet or dry.

Figure 7: The foil shaver head provides a close and smooth finish for face, neck, or bald head.

5.5 Travel Lock

To activate the travel lock, press and hold the power button for 3 seconds. The lock icon will appear on the LED display. To deactivate, press and hold the power button for another 3 seconds.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your grooming kit.

6.1 Cleaning the Heads

1. Turn off the appliance and detach the head.
2. Rinse the detached head under running water. The device is IPX7 waterproof, allowing for easy cleaning.
3. Use the provided cleaning brush to remove any stubborn hair particles.
4. Allow the head to air dry completely before reattaching or storing.

Figure 8: All attachments are washable under running water for easy cleaning.

6.2 Lubrication

After every few uses, or if the blades feel sluggish, apply a small drop of the provided lubricating oil to the blades. Turn on the trimmer for a few seconds to distribute the oil evenly.

6.3 Storage

Store the grooming kit and its accessories in a dry place, away from direct sunlight and out of reach of children.

7. Troubleshooting

8. Specifications

• Model: AF-8098K
• Brand: Aesfee
• Blade Material: Stainless Steel
• Power Source: Rechargeable Lithium-ion Battery
• Charging Time: Approximately 1.5 hours
• Run Time: Up to 100 minutes
• Waterproof Rating: IPX7 (fully washable)
• Cutting Lengths: 0.5mm - 20mm (with adjustable combs)
• Dimensions: 16.2 x 8 x 19.8 cm
• Weight: 620 grams

9. Warranty and Support

The Aesfee AF-8098K Grooming Kit comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to purchase replacement parts, please contact Aesfee customer service through their official website or the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.

For further assistance, please visit: www.aesfee.com