1. Product Overview
The Mrisata M6C LCD Display Meter is designed for electric bicycles and scooters, providing essential riding information at a glance. It features a clear LCD screen and is compatible with 24V, 36V, 48V, and 60V systems.
Key Features:
- Clear LCD Display: Shows speed, distance, battery level, and PAS (Pedal Assist System) level.
- Easy Installation: Designed for most 22.2mm handlebars.
- Versatile Connectivity: 6-pin cable for compatibility with various voltage systems (24V, 36V, 48V, 60V).
- Durable Construction: Made from premium ABS material for lightweight sturdiness and wear resistance.
2. Safety Information
Please read and understand all safety instructions before installing and operating the M6C LCD Display Meter. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- Ensure the electric bike/scooter is powered off before installation or maintenance.
- Always disconnect the battery before working on electrical components.
- Do not attempt to open or modify the display unit. This may void the warranty and cause damage.
- Keep the display unit dry and away from extreme temperatures.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Consult a qualified technician if you are unsure about any installation or wiring procedures.
3. Package Contents
Verify that all items are present in the package:
- 1 x Mrisata M6C Electric Bicycle LCD Display Meter
- 1 x Control Button Unit with Cable
- 1 x User Manual (this document)
4. Product Components
5. Installation
The M6C LCD Display Meter is designed for easy installation on standard 22.2mm handlebars. Ensure your electric bike/scooter is powered off and the battery is disconnected before proceeding.
- Mount the Display Unit:
Position the M6C display unit on your handlebar. Use the integrated clamps to secure it firmly. Ensure the display is oriented for optimal viewing while riding.
Figure 5.1: M6C display and control button mounted on handlebars. This image shows the display unit and the separate control button unit attached to a handlebar, illustrating their typical mounting positions. - Mount the Control Button Unit:
Attach the separate control button unit to a convenient location on your handlebar, typically near the left grip for easy access with your thumb.
- Connect the Cables:
Locate the 6-pin connector from the M6C display unit and the corresponding connector on your electric bike's wiring harness. Carefully align and push the connectors together until they click securely. Ensure the headlight connector (if present on your bike's harness) is also properly connected if you intend to use the display's headlight control feature.
Figure 5.2: M6C display and control button with connected cables. This image provides a clear view of the display and control units, highlighting the wiring that connects them and the main 6-pin connector for the bike's system. - Secure Wiring:
Route and secure all cables using zip ties or cable wraps to prevent them from interfering with steering or moving parts, and to protect them from damage.
6. Operating Instructions
Once installed and connected, the M6C display provides real-time information and control over your electric bike's functions.
6.1 Power On/Off
- To power on the display, press and hold the power button (usually the middle button on the control unit) for a few seconds.
- To power off the display, press and hold the power button again until the screen turns off.
6.2 Display Information
The LCD screen provides the following information:
- Speed: Current riding speed (km/h or mph).
- Battery Level: Graphical representation of remaining battery charge ("ENERGY BAR").
- PAS Level: Current Pedal Assist System level (e.g., PAS 1-5).
- Odometer (ODO): Total distance traveled.
- Trip Distance: (Implied, often toggled with ODO) Distance for the current ride.
6.3 Adjusting PAS Levels
Use the UP and DOWN buttons on the control unit to adjust the Pedal Assist System level. Higher PAS levels provide more motor assistance.
- Press the UP button to increase the PAS level.
- Press the DOWN button to decrease the PAS level.
6.4 Headlight Control (If Applicable)
If your electric bike's wiring harness supports it and is connected to the display's 6-pin connector, the display may offer headlight control. Consult your bike's manual for specific instructions on activating the headlight via the display.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your M6C LCD Display Meter.
- Cleaning: Wipe the display screen and casing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Exposure: The display is designed to be splash-resistant, but avoid submerging it in water or exposing it to heavy rain for extended periods.
- Cable Inspection: Periodically check all cables and connectors for signs of wear, damage, or loose connections.
- Storage: When not in use for extended periods, store the electric bike/scooter in a dry, temperate environment.
8. Troubleshooting
If you encounter issues with your M6C LCD Display Meter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not power on. |
|
|
| Incorrect speed reading. |
|
|
| PAS levels not changing. |
|
|
If the problem persists after trying these steps, please contact Mrisata customer support or your retailer for further assistance.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Mrisata |
| Model Name | M6C (Mrisatasi8dt96gyr) |
| Applicable Voltage | 24V, 36V, 48V, 60V |
| Material | ABS |
| Handlebar Clamp Diameter | 22.2mm / 0.7in (Standard) |
| Connector Type | 6-Pin Cable |
| Display Type | LCD |
| Weight | Approx. 216g / 7.6oz |
| Item Package Dimensions | 5.12 x 4.33 x 2.76 inches |
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Mrisata
Model: M6C (Mrisatasi8dt96gyr)