WINNY POOL CLEANER HJ1103SK

WINNY POOL CLEANER

Cordless Robotic Pool Cleaner

Model: HJ1103SK

Introduction

Thank you for choosing the WINNY POOL CLEANER Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Designed for above-ground pools, this robotic cleaner offers powerful, hassle-free cleaning with its advanced features and cordless design.

WINNY Cordless Robotic Pool Cleaner

The WINNY Cordless Robotic Pool Cleaner, featuring a sleek white and green design, ready for operation.

Packing List

Please verify that all items are present in the package:

  • Pool cleaner x 1
  • Power adapter x 1
  • Flippers & handle x 1
  • Scraper x 2
  • Retrieving hook x 1
  • User manual x 1
  • Quick Guide x 1
Packing list for WINNY Pool Cleaner

Visual representation of the items included in the WINNY Pool Cleaner package.

Setup

  1. Charge the Cleaner: Before first use, fully charge the pool cleaner using the provided power adapter. The LED indicator will show charging status.
  2. Attach Components: Securely attach the flippers and handle to the cleaner. Ensure the scraper is properly installed if needed for specific debris.
  3. Placement: Gently lower the cleaner into your pool. Ensure it is fully submerged before activation.
  4. Activate: Press the one-click start button. The LED indicator will illuminate, signaling that the cleaner is active and beginning its cleaning cycle.
One-Click Start with LED Indicator

The simple one-click start mechanism and LED indicator for operational status.

Operating the Cleaner

The WINNY Robotic Pool Cleaner is designed for autonomous operation, providing efficient cleaning for your above-ground pool.

  • Runtime: Enjoy up to 130 minutes of continuous cleaning on a single charge, sufficient for pools up to 1300 sq. ft.
  • Powerful Suction: Equipped with an upgraded motor, it delivers a powerful 2640 GPH suction rate, effectively collecting leaves, debris, and fine dirt.
  • Dual-Layer Filtration: Features a 180µm fine mesh and a foam filter to capture ultra-fine particles, ensuring visibly clearer water.
  • Smart Self-Parking: When the battery is low, the cleaner automatically navigates to the pool edge for easy retrieval.
  • Cycle Timer: Utilize the built-in scheduling feature for automatic daily cleaning, eliminating the need for manual resets for up to 7 days.
Efficient Cleaning

The cleaner efficiently removing leaves and debris from the pool floor.

Smart Sensor Technology

The smart sensor technology allows the cleaner to detect low battery and self-park near the pool edge.

Maintenance

Regular maintenance ensures optimal performance and longevity of your WINNY Pool Cleaner.

  • Clean Debris Compartment: The high-capacity debris compartment should be emptied and rinsed regularly. This reduces the frequency of emptying and ensures uninterrupted cleaning.
  • Rinse Filter: After each use, remove the filter and rinse it thoroughly with a hose to remove trapped dirt, sand, and other particles.
  • Water Release: The cleaner features 'Lock Dirt and Debris Technology 3.0' allowing water to drain in 5 seconds with no leakage, making it easy to lift and clean.
Lock Dirt and Debris Technology

The cleaner's design allows for quick water drainage and easy debris removal.

Easy to Retrieve & Lightweight

The lightweight design and retrieving hook make it easy to lift the cleaner from the pool.

Troubleshooting

If you encounter issues with your pool cleaner, please refer to the following common solutions:

  • Cleaner not moving or stopping prematurely: Ensure the battery is fully charged. Check for any obstructions in the wheels or suction port.
  • Poor suction or cleaning performance: Clean the debris compartment and filters thoroughly. Ensure the cleaner is fully submerged and operating on a flat surface.
  • Cleaner not parking at pool edge: Verify that the water depth is within the specified range (less than 8.2 ft) and there are no large obstructions preventing it from reaching the wall.

For persistent issues, please contact customer support.

Specifications

FeatureDetail
Model NameHJ1103SK
BrandWINNY POOL CLEANER
Power SourceAC (for charging)
Special FeaturesCycle Timer, High-Suction Motor, Auto-Park at Pool Edge, 180µm Filter
Battery TypeLithium Battery (6600mAh)
Runtime130 Minutes
Coverage AreaUp to 1300 sq. ft.
Product Dimensions15.35"L x 12.2"W x 17.72"H
Item Weight16.57 pounds
MaterialPlastic
ColorWhite&Green

Warranty and Support

This product comes with a Manufacturer Warranty. For warranty claims, technical support, or any inquiries, please contact WINNY POOL CLEANER customer service through the retailer where you purchased the product or visit the official WINNY POOL CLEANER website for contact information.

Please retain your proof of purchase for warranty purposes.

Related Documents - HJ1103SK

PreviewWinny 200/HJ1102P Robotic Pool Cleaner User Manual
User manual for the Winny 200/HJ1102P robotic pool cleaner, covering setup, operation, maintenance, troubleshooting, and warranty information.
PreviewHydrus Cordless Pool Vacuum User Manual
Comprehensive user manual for the Hydrus Cordless Pool Vacuum, a robotic pool cleaner with a 90-minute runtime, powerful brushless motor, and self-parking feature, ideal for above and in-ground flat swimming pools up to 50 feet.
PreviewINSE N8 Cordless Vacuum Cleaner: User Manual & Guide | Powerful Home Cleaning
This user manual provides comprehensive instructions for the INSE N8 Cordless Vacuum Cleaner. Discover how to assemble, operate, and maintain your lightweight stick vacuum for efficient home cleaning. Features include powerful suction, a 2200mAh battery offering up to 40 minutes of runtime, and easy-to-use attachments.
PreviewILIFE V2 Robotic Vacuum Cleaner User Manual - Tangle-Free Suction, 120 Mins Runtime
Comprehensive user manual for the ILIFE V2 Robotic Vacuum Cleaner. Learn about its tangle-free suction, 120-minute runtime, slim design, self-charging capabilities, and suitability for pet hair and hard floors.
PreviewAiper Scuba SE Robotic Pool Cleaner - Effortless Cleaning
Discover the Aiper Scuba SE, a cordless robotic pool cleaner offering effortless operation, powerful suction, and advanced features for a sparkling clean pool. Learn about its self-parking, audio alerts, and single-click activation.
PreviewXtremepowerUS 75037 Automatic Pool Cleaner: Assembly and User's Guide
This guide provides detailed instructions for assembling, operating, and maintaining the XtremepowerUS 75037 Automatic Pool Suction Cleaner Vacuum. Learn how to set up, troubleshoot, and ensure optimal performance for your in-ground or above-ground swimming pool.