ARTPOWER B0DYHZ2CTT
ARTPOWER Modern Entryway Table with Wood Tambour Door
Model: B0DYHZ2CTT
Brand: ARTPOWER
Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your ARTPOWER Modern Entryway Table with Wood Tambour Door. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The ARTPOWER Modern Entryway Table, showcasing its design and functionality in a home environment.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble on a soft, clean surface to prevent scratches.
- Tighten all screws and bolts securely. Periodically check and re-tighten as needed.
- Do not overload the table. Refer to specifications for maximum weight recommendations.
- Utilize the anti-tipping hardware provided to secure the table to a wall, especially if children or pets are present.
Image: Detail of the anti-tipping setting, designed to enhance stability and safety.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing, please contact customer support.
Image: An overhead view displaying all individual components of the table before assembly.
- Top Panel
- Bottom Shelf
- Side Panels (4)
- Middle Dividers (2)
- Tambour Doors (2)
- Legs (4)
- Hardware Pack (screws, dowels, anti-tipping kit)
- Assembly Instructions
Setup and Assembly
Follow these step-by-step instructions for assembling your entryway table. An assembly video is also provided for visual guidance.
Video: Easy Assembly Guide for the Sliding Console Table. This video provides a step-by-step visual walkthrough of the assembly process.
- Prepare the Top and Bottom Panels: Lay the top panel (A) and bottom panel (B) on a soft, flat surface.
- Attach Side Panels and Dividers: Secure the side panels (C) and middle dividers (D) to the top panel using the provided screws. Ensure they are aligned correctly with the pre-drilled holes.
- Connect the Bottom Panel: Attach the assembled top section to the bottom panel (B), ensuring all connections are firm.
- Install Legs: Screw the four legs (E) into the designated points on the bottom panel. Ensure they are tightly secured.
- Insert Tambour Doors: Carefully slide the tambour doors (F) into the grooves on the top section. Test for smooth operation.
- Attach Handles: Secure the handles to the tambour doors.
- Install Anti-Tipping Kit: For safety, attach the anti-tipping hardware to the back of the table and secure it to a wall stud according to the separate instructions provided with the kit.
Image: Illustration of the table's main structure taking shape during assembly.
Operating Instructions
Tambour Doors
The unique tambour doors slide smoothly to reveal or conceal the storage compartments. To open, gently pull the handle towards the side. To close, push the handle back to the center. The doors are designed for 360-degree sliding, allowing flexible access.
Image: Detailed view of the tambour door, highlighting its smooth 360-degree sliding functionality.
Storage Compartments
The table features two tiered storage designs:
- Top Tier (behind tambour doors): Ideal for storing smaller items such as keys, wallets, or decorative pieces.
- Bottom Open Shelf: Suitable for larger items like books, baskets, or other decorative accents.
Image: The entryway table displaying its storage capabilities with various items placed on the top and bottom shelves.
Maintenance
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining, especially on the engineered wood surface.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the wood.
- Adjustable Padding: The table features adjustable padding on the legs. Ensure these are properly adjusted to keep the table level on uneven surfaces.
Image: Detail of the adjustable padding at the base of a table leg, allowing for stability on various floor types.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose connections; uneven floor; legs not fully tightened. | Check and tighten all screws. Adjust the leg paddings to level the table. |
| Tambour doors stick or don't slide smoothly | Debris in the track; misaligned doors; track damage. | Clean the door tracks. Ensure doors are correctly seated in the grooves. Contact support if damage is suspected. |
| Parts do not fit during assembly | Incorrect orientation of parts; manufacturing defect. | Review the assembly steps and diagrams carefully. Ensure parts are oriented as shown. Contact customer support if parts are defective. |
Specifications
- Brand: ARTPOWER
- Product Dimensions: 11.8"D x 47.2"W x 31.7"H
- Item Weight: 35.31 Pounds
- Maximum Weight Recommendation: 44 Pounds
- Frame Material: Engineered Wood
- Color: Brown
- Table Design: Console Table
- Style Name: Modern
- Furniture Finish: Stained
- Number of Drawers: 2 (Tambour Doors function as access to compartments)
- Required Assembly: Yes
- Indoor Outdoor Usage: Indoor
- Tools Recommended For Assembly: Hammer, Screw Driver
Image: A detailed diagram illustrating the precise dimensions of the entryway table.
Warranty and Support
ARTPOWER stands behind the quality of its products. For specific warranty details, please refer to the warranty card included in your package or visit the official ARTPOWER website. If you encounter any issues or have questions regarding your product, please contact ARTPOWER customer support for assistance.
Customer Support: Please refer to your purchase documentation or the ARTPOWER website for contact information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.