1. Introduction
This document provides instructions for the use and maintenance of the FEELNEEDY RF-FY-12P replacement filter set for pet water fountains. This 12-pack set includes activated carbon filters, filter sponges, and pump sponges, designed to ensure your pets have access to clean and healthy drinking water.
2. Compatibility
The RF-FY-12P filter replacement set is compatible with the following FEELNEEDY wireless pet automatic water dispensers:
- FEELNEEDY YPD-C004P
- FEELNEEDY YPD-C004PB
- FEELNEEDY YPD-C004S
- FEELNEEDY FS10Pro
Please ensure your pet water fountain model matches one of the listed compatible models for proper fit and function.
Figure 2.1: Compatible pet water fountains and filter diagram.
3. Product Features: Multi-Layer Filtration System
The FEELNEEDY RF-FY-12P filters feature an advanced multi-layer filtration design to effectively purify water for your pets. This system is designed to remove various impurities, providing cleaner and healthier drinking water.
Figure 3.1: Detailed view of the 5-layer filtration system.
Filtration Layers:
- Primary Sponge: Filters out larger particles such as hair and debris.
- Filter Cotton: Further filters particulate matter present in the air.
- Activated Carbon: Removes microparticles like sand, rust, and unpleasant odors.
- Ion Exchange Resin: Effectively softens hard water and helps prevent scale buildup.
- Filter Cotton: Provides an additional layer of filtration for airborne particulate matter.
Figure 3.2: Components of the water purification process.
4. Setup and Installation
Follow these steps to prepare and install your new filter:
- Soak the Filter: Before initial use, soak the new filter replacement in clean water for 3-5 minutes. This helps to remove any loose carbon dust and prepares the filter for optimal performance.
- Rinse Thoroughly: After soaking, rinse the filter thoroughly under running tap water.
- Install: Place the prepared filter into the designated filter slot of your pet water fountain according to your fountain's specific instructions. Ensure it is seated correctly to prevent bypass filtration.
Figure 4.1: Filter preparation steps: soaking and rinsing.
5. Maintenance
Regular maintenance is crucial for the longevity of your pet water fountain and the health of your pets.
Filter Replacement:
- It is recommended to replace the cat water server filter every 20-30 days. This ensures continuous provision of fresh and clean water.
- The 12-pack set provides approximately 8-12 months of filters, depending on usage and replacement frequency.
Pump Cleaning:
- For your pet's health and to extend the lifespan of the fountain pump, it is recommended to clean the pet fountain pump once every two weeks.
6. Troubleshooting
No specific troubleshooting information is provided for this product. If you encounter issues with your pet water fountain or the filters, please refer to the fountain's original instruction manual or contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | RF-FY-12P |
| Color | White |
| Quantity | 12 filters (12 activated carbon filters, 12 filter sponges, 12 pump sponges) |
| Care Instructions | Recommended replacement every 20-30 days |
| Special Use | Water purification |
| Batteries Required | No |
| Batteries Included | No |
| Certification | RoHS |
| Material | Surface (PP), Interior (Coconut shell activated carbon, Ion exchange resin) |
| Brand | PETPNR |
| Item Weight | 0.2 kg |
| Product Dimensions | 12 cm (length) x 8.5 cm (width) x 0.6 cm (height) |
8. Warranty and Support
Your satisfaction is important to us. If you encounter any issues with the filter or require assistance, please contact customer support.
- Quality Guarantee: If there is a quality problem with the filter cartridge, you are eligible for a full refund within 90 days of purchase.
- Customer Service: For any questions or concerns, please contact us. We are committed to providing helpful service.
