Introduction
This manual provides essential information for the setup, operation, and maintenance of your replacement infrared (IR) remote control for Veatool S50L 100W 2.2ch Sound Bars. This remote is designed to function as a direct replacement for your original remote. Please ensure your original remote matches the appearance of this replacement for full compatibility.
Image: Front view of the replacement remote control, showing all buttons clearly. The remote is black with grey buttons.
Setup
Battery Installation
The remote control requires two (2) AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the tab and slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery cover removed, illustrating the correct orientation for AAA battery insertion.
Important: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries.
Operating Instructions
This remote control is pre-programmed and requires no setup or programming. Simply point the remote directly at your Veatool S50L Sound Bar to operate it.
Button Functions
| Button | Function |
|---|---|
| Power (Red Circle) | Turns the soundbar On or Off. |
| Mute (Green Speaker with X) | Mutes or unmutes the sound. |
| TREBLE+ / TREBLE- | Adjusts the treble level up or down. |
| BASS+ / BASS- | Adjusts the bass level up or down. |
| Volume Up (+) / Volume Down (-) | Increases or decreases the master volume. |
| Play/Pause (►▮▮) | Plays or pauses media playback. |
| Previous Track (◀◀) | Skips to the previous track. |
| Next Track (►►) | Skips to the next track. |
| MODE | Cycles through available input modes (e.g., AUX, OPT, BT, USB, HDMI ARC). |
| AUX | Selects Auxiliary input. |
| OPT | Selects Optical input. |
| BT | Selects Bluetooth input. |
| USB | Selects USB input. |
| HDMI ARC | Selects HDMI ARC input. |
| EQ | Cycles through equalizer presets. |
| 3D | Activates or deactivates 3D sound mode. |
| Loop/Repeat (Arrow Circle) | Controls playback repeat functions (e.g., repeat one, repeat all). |
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's range decreases or it becomes unresponsive. Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Drops: Protect the remote from physical impact, as internal components can be damaged.
Troubleshooting
If you experience issues with your remote control, please refer to the following common solutions:
- Remote Not Responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new ones.
- Make sure there are no obstructions between the remote control and the soundbar's IR receiver.
- Ensure you are within the effective operating range of the soundbar.
- Specific Functions Not Working:
- Verify that your soundbar model (Veatool S50L) is compatible with this replacement remote. This remote is an IR replacement and may not have all functions identical to your original remote if it was a different type (e.g., RF).
- Refer to your soundbar's original manual for specific functions or settings that might require interaction directly on the soundbar unit.
- Remote Appears Different from Original:
- This is a replacement remote. While designed for compatibility, its physical appearance or button layout may differ slightly from your original remote. Functionality for the specified soundbar model should remain.
If the issue persists after trying these steps, please contact the seller for further assistance.
Specifications
- Product Type: Infrared (IR) Replacement Remote Control
- Compatible Devices: Veatool S50L 100W 2.2ch Sound Bars (Home Theater Systems)
- Power Source: 2 x AAA Batteries (not included)
- Color: Black
- Max Number of Supported Devices: 1
- Manufacturer: Easytry
Warranty and Support
Specific warranty information for this replacement remote control is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please refer to the purchase documentation or contact the seller directly through the platform where the product was purchased.
