Introduction
This manual provides detailed instructions for assembling, operating, and maintaining your SATHIBI Tanjiro Sword Building Set. This highly detailed building block set allows you to construct a replica of Kamado Tanjiro's sword from the anime Demon Slayer, complete with a scabbard and display stand. Designed for enthusiasts, this 759-piece set offers an engaging building experience and results in an impressive display piece.
Image: The fully assembled Tanjiro Sword, scabbard, and display stand.
Safety Information
- Recommended Age: This building set is intended for individuals aged 14 years and older (Manufacturer Minimum Age: 168 months).
- Small Parts Warning: The set contains small parts which may pose a choking hazard for young children. Keep out of reach of children under 3 years.
- Handling: While designed for display, handle the assembled model with care to prevent accidental disassembly or damage.
- Intended Use: This product is a model building set and is not intended for use as a weapon or for combat play.
Package Contents
Before beginning assembly, please verify that all components are present in your package:
- 759 Building Block Pieces (for sword, scabbard, and stand)
- Instruction Manual (this document)
If any pieces are missing or damaged, please refer to the Customer Support section.
Setup: Assembly Instructions
Follow the step-by-step instructions provided in the included printed manual to assemble your Tanjiro Sword, scabbard, and display stand. Organize your pieces before starting to ensure a smooth building process.
- Unpack and Sort: Carefully open all bags containing building blocks. It is recommended to sort pieces by color, size, or type to facilitate easier assembly.
- Review Instructions: Familiarize yourself with the assembly steps by reviewing the entire instruction booklet before you begin.
- Assemble the Sword: Begin by constructing the main blade and hilt of the Tanjiro sword according to the diagrams. Pay close attention to the orientation of each block.
- Assemble the Scabbard: Once the sword is complete, proceed with assembling the scabbard. Ensure the internal dimensions allow the sword to fit smoothly.
- Assemble the Display Stand: Finally, construct the display stand. This stand is designed to securely hold both the sword and its scabbard.
- Final Check: After completing all steps, gently test the connections of all parts to ensure stability.
Image: Detailed views of the sword components, scabbard, and display stand, illustrating the intricate design.
Operating the Display Model
This building set is designed as a static display model. Once assembled, you can place the sword and scabbard on the provided display stand.
- Placement: Position the assembled sword on the display stand. The stand is designed to hold the sword securely.
- Scabbard: The scabbard can be placed alongside the sword on the stand or held separately. The sword can be sheathed and unsheathed from the scabbard.
- Display Location: Choose a stable, flat surface away from direct sunlight, excessive heat, or high humidity to prevent material degradation.
Image: The assembled sword and scabbard displayed on the custom stand.
Image: A close-up view of the sword's hilt and blade details while on the display stand.
Maintenance
Proper care will help maintain the appearance and integrity of your building set.
- Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture.
- Avoid Chemicals: Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic material and printed details.
- Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss and protect from dust.
Troubleshooting
Here are solutions to common issues you might encounter:
- Missing Pieces: If you discover missing pieces during assembly, carefully re-check all packaging and sorting areas. If pieces are still missing, contact customer support with details of the missing parts.
- Loose Connections: Ensure that each block is firmly pressed into place. Sometimes, a slight twist or extra pressure is needed to secure connections.
- Difficulty Following Instructions: Review the diagrams carefully. If a step is unclear, try looking at subsequent steps for context or re-examining the previous steps.
Specifications
| Brand | SATHIBI |
| Model Name | Tanjirou Sword |
| Model Number | 1516 |
| Number of Pieces | 759 |
| Assembled Length | Approximately 40 inches (101 cm) |
| Material | ABS Plastic |
| Recommended Age | 14+ years (168 months minimum) |
| Assembly Required | Yes |
| Operation Mode | Manual (for assembly and display) |
Image: Dimensional overview of the assembled sword and scabbard.
Return Policy
This product is subject to a 30-day return policy for refund or replacement. Please refer to the retailer's specific return guidelines for detailed information regarding eligibility and process.
Customer Support
For further assistance, inquiries about missing parts, or any other support needs, please visit the official SATHIBI store or contact your retailer.
SATHIBI Store: https://www.amazon.com/stores/SATHIBI/page/02A5537E-CF39-498C-B66A-9049E8807F3F