Introduction
Thank you for choosing the Misolant Vanity Chair with Back. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
The Misolant Vanity Chair is designed for comfort and functionality in home office, vanity, or bedroom settings. It features an ergonomic wrap-around backrest, a spacious square cushion, and adjustable height, all upholstered in skin-friendly PU leather.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the chair on a soft, clean surface to prevent scratches.
- Tighten all screws firmly, but do not overtighten. Periodically check and retighten all fasteners to ensure stability.
- Do not stand on the chair or use it as a step stool.
- Do not exceed the maximum weight capacity of 300 lbs.
- Keep children away from moving parts during assembly and adjustment.
- Use the chair on a level surface to prevent tipping.
Package Contents
Please verify that all the following components are included in your package:
- Seat Cushion
- Backrest
- Chair Base (5-star base with wheels)
- Gas Lift Cylinder
- Mechanism Plate (connects seat to gas lift)
- Assembly Hardware (screws, washers, Allen wrench)
- Instruction Manual
Assembly Instructions
Assembly typically takes about 10 minutes. Follow these steps:
- Attach Wheels to Base: Insert the five caster wheels into the holes at the end of each leg of the chair base. Push firmly until they click into place. No tools are required for this step.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the chair base.
- Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and the Allen wrench. Ensure the lever is facing the front of the seat.
- Attach Backrest to Seat: Align the backrest support with the corresponding holes on the mechanism plate. Secure it with the remaining screws.
- Connect Seat Assembly to Gas Lift: Carefully place the assembled seat (with mechanism plate and backrest) onto the top of the gas lift cylinder. Press down firmly to secure the connection.
Your Misolant Vanity Chair is now assembled and ready for use.
Operating Instructions
Adjusting Chair Height
To adjust the chair's height, locate the lever on the right side beneath the seat. While seated, pull the lever up to lower the chair. To raise the chair, stand up and pull the lever up. Release the lever at your desired height.
Swivel Function
The chair features a 360-degree swivel function, allowing for easy rotation and movement without repositioning the entire chair.
Movement
The nylon silent wheels allow for smooth and quiet movement across various floor types without causing damage.
Image: The Misolant Vanity Chair demonstrating its adjustable height and 360-degree swivel capabilities.
Maintenance and Care
Cleaning
The chair is upholstered in premium PU leather, which is skin-friendly and easy to clean. For general cleaning, wipe the surface with a soft, damp cloth. For tougher stains, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
Regular Checks
Periodically inspect all screws and connections to ensure they remain tight. Retighten as necessary to maintain the chair's stability and safety.
Troubleshooting
Chair is Wobbly
- Check all assembly screws and ensure they are fully tightened.
- Ensure the chair is on a flat, even surface.
Height Adjustment Not Working
- Verify that the gas lift lever is correctly engaged.
- Ensure the gas lift cylinder is properly seated in both the base and the mechanism plate.
Wheels Not Rolling Smoothly
- Check for any debris (hair, lint, etc.) caught in the wheels and remove it.
- Ensure the wheels are fully inserted into the chair base.
Specifications
| Feature | Detail |
|---|---|
| Brand | Misolant |
| Model Number | 75331fcf-c1ce-4648-b320-595c1d5480a8 |
| Color | Pink |
| Product Dimensions | 19.68"D x 17.32"W x 31.5"H |
| Seat Material Type | Faux Leather |
| Fill Material | Sponge |
| Special Feature | Adjustable Height |
| Arm Style | Armless |
| Weight Capacity | Up to 300 lbs (inferred from image) |
| Item Weight | 18.26 pounds |
| Gas Lift Certification | SGS Certified Class-4 |
| BIFMA Test | Passed US BIFMA test |
Image: Detailed product dimensions of the Misolant Vanity Chair.
Warranty and Support
The Misolant Vanity Chair comes with a one-year warranty for your peace of mind. For any questions or concerns regarding your product, please contact Misolant customer service. We are committed to providing exceptional service and are always here to assist you.
Additional Product Views
Video: A visual display of the Misolant Vanity Office Chair, showcasing its design and features in an office setting.
Video: A short clip highlighting the minimalist design and pink aesthetic of the Vanity Chair.
Video: A brief preview showcasing the DurayLoly Cute Vanity Chair in Pink, demonstrating its compact size and swivel.
Image: The Misolant Vanity Chair positioned in a modern vanity area, highlighting its aesthetic appeal.
Image: An illustration detailing the ergonomic curved backrest and bionic L-shaped design for lumbar support.
Image: Product details highlighting the soft-touch faux leather, extra-thick natural sponge, and high-quality materials.
Image: Features emphasizing the chair's durability and quality, including the sturdy metal base, nylon silent wheels, and explosion-proof gas lift.
Image: Detailed view of the SGS Certified Class-4 Gas Lift and 360-degree wear-resistant, quiet wheels.