1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TKENPRO Dual Lens Solar Security Camera. This wireless outdoor camera features 2K Full HD video, a 360° view with pan/tilt capabilities, color night vision, and PIR alarm detection, powered by solar energy for continuous operation. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
2. Product Overview and Key Features
2.1 Dual Lens System for Comprehensive Coverage
The camera is equipped with two lenses to eliminate blind spots. One fixed lens monitors a critical zone, while the other lens offers 355° horizontal and 110° vertical rotation for dynamic area surveillance. This design provides extensive coverage for areas such as porches, yards, and driveways.
Image: Illustration of the dual-lens system, showing a fixed lens monitoring a garage area and a rotating lens covering a wider outdoor space.
Image: A visual representation of the camera's 360° panoramic view, indicating 355° pan and 100° tilt rotation for flexible monitoring.
2.2 2K Ultra HD Resolution and Advanced Night Vision
The camera captures video in crisp 2K resolution, providing clear details of events. It features a powerful white spotlight and built-in infrared LED array, enabling both color night vision and standard infrared night vision to monitor your property in low-light conditions.
Image: A split image demonstrating the camera's 2K resolution in both daytime (color) and nighttime (color night vision) scenarios in a backyard setting.
2.3 Solar/Battery Powered and True Wireless Operation
The camera is equipped with a solar panel and a rechargeable battery, ensuring continuous power without the need for frequent manual charging or complex wiring. Its IP65 waterproof rating provides durability against various weather conditions, making it suitable for outdoor installation. Note: This camera supports 2.4GHz WiFi networks only.
Image: The camera and its solar panel are shown installed on the exterior of a building, highlighting the wire-free and flexible installation.
2.4 PIR Sensing and Real-Time Communication
Advanced PIR (Passive Infrared) and smart AI detection technology reduce false alarms and send instant alerts to your device. The camera also supports two-way audio, allowing for real-time conversations with visitors or to deter intruders.
Image: An illustration of the AI Smart Detection features, including real-time app notifications, motion-activated light, 65ft sensing distance, and a 110 dB security siren.
Image: A scenario depicting two-way audio communication, where a user speaks through the camera to a person at their front door.
2.5 Flexible Storage Options
Recorded videos can be stored locally on a memory card (up to 256GB, not included) or via cloud storage. Basic cloud storage functions are available without charge. The camera also integrates with Alexa for voice control and live video display.
3. Package Contents
Please verify that all items are present in your package:
- Dual Lens Solar Security Camera Unit
- Solar Panel
- Mounting Bracket and Screws
- USB Charging Cable
- User Manual
Image: A flat lay of the product's components, including the camera, solar panel, mounting hardware, USB cable, and user manual.
4. Setup Guide
4.1 Physical Installation
- Choose a Location: Select an outdoor location with ample sunlight exposure for the solar panel and a clear view for the camera. Ensure the location is within range of your 2.4GHz WiFi network.
- Mount the Camera: Use the provided mounting bracket and screws to securely attach the camera unit to a wall or desired surface. Adjust the camera's angle for optimal coverage.
- Mount the Solar Panel: Install the solar panel in a position that receives direct sunlight for most of the day. Connect the solar panel cable to the camera unit.
4.2 App Connection
- Download the App: Search for and download the 'CloudEdge' app from your smartphone's app store (iOS or Android).
- Create an Account: Open the app and follow the on-screen instructions to create a new user account or log in if you already have one.
- Add Device: Ensure your phone's Bluetooth is enabled. In the app, tap 'Add Device' or the '+' icon. Select the appropriate camera model.
- Connect to WiFi: Follow the app's instructions to connect the camera to your 2.4GHz WiFi network. You may need to scan a QR code displayed on your phone with the camera.
- Complete Setup: Once connected, name your camera and complete the initial setup process.
5. Operating Instructions
5.1 Live View and Pan/Tilt Control
Open the CloudEdge app and select your camera to view the live feed. Use the on-screen controls to pan (horizontal) and tilt (vertical) the rotating lens to adjust your viewing angle.
Image: A smartphone displaying the live feed from both the fixed and rotating lenses of the security camera, offering a comprehensive view of the backyard.
5.2 Motion Detection Settings
Navigate to the camera settings in the app to configure motion detection. You can adjust sensitivity levels and set up specific activity zones (up to 12) to focus monitoring on important areas and reduce unwanted alerts.
5.3 Two-Way Audio
From the live view screen, tap the microphone icon to activate two-way audio. You can speak through your phone, and your voice will be projected through the camera's speaker. Tap the speaker icon to listen to audio from the camera's vicinity.
5.4 Recording and Playback
Recorded events are stored on the inserted memory card or in the cloud. Access the 'Playback' section in the app to review past footage. You can filter recordings by date and event type.
5.5 Night Vision Modes
The camera automatically switches between day and night vision. In low light, it can activate infrared LEDs for black and white vision or the white spotlight for color night vision, depending on your settings and detected motion.
6. Maintenance
- Solar Panel Cleaning: Periodically clean the surface of the solar panel with a soft, damp cloth to ensure maximum sunlight absorption and efficient charging.
- Camera Lens Cleaning: Gently wipe the camera lenses with a microfiber cloth to remove dust or smudges that may affect image clarity.
- Battery Health: The integrated rechargeable battery is designed for long-term use. Ensure the solar panel is positioned to receive adequate sunlight to maintain battery charge.
7. Troubleshooting
- Q: Camera is not connecting to WiFi.
- A: Ensure your WiFi network is 2.4GHz. The camera does not support 5GHz WiFi. Check that the camera is within range of your router and that the WiFi password is entered correctly. Restart your router and the camera if necessary.
- Q: Receiving too many false alarms.
- A: Adjust the motion detection sensitivity settings in the CloudEdge app. You can also define specific activity zones to exclude areas where unwanted motion (e.g., passing cars, trees swaying) might trigger alerts.
- Q: Camera battery is not charging.
- A: Verify that the solar panel is clean and positioned to receive direct sunlight for several hours daily. Check the connection cable between the solar panel and the camera for any damage or loose connections.
- Q: Live stream is slow or frequently disconnects.
- A: Check your WiFi signal strength at the camera's location using the app. If the signal is weak, consider relocating the camera or using a WiFi extender. Ensure your internet connection is stable.
8. Specifications
| Feature | Detail |
|---|---|
| Model | B0DXVL4TN9 |
| Brand | TKENPRO |
| Resolution | 2K Full HD |
| Connectivity | 2.4GHz Wi-Fi Only |
| Power Source | Solar Powered, Rechargeable Battery |
| Pan/Tilt Range | 355° Horizontal, 110° Vertical (Rotating Lens) |
| Night Vision | Color Night Vision, Infrared Night Vision |
| Motion Detection | PIR Sensing, Smart AI Detection |
| Audio | Two-Way Audio |
| Storage Options | Micro SD Card (up to 256GB, not included), Cloud Storage |
| Weather Resistance | IP65 Waterproof |
| Compatible Devices | Smartphone (via CloudEdge App) |
| Item Weight | 2.38 pounds (1.08 Kilograms) |
| Package Dimensions | 7.99 x 6.89 x 5.55 inches |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or contact TKENPRO customer service directly through their official website or the contact information provided in the CloudEdge app. Please have your product model number (B0DXVL4TN9) ready when contacting support.