1. Product Overview
The VEVOR Vacuum Stand HLFGSJLG-01 is designed to provide a stable and organized storage solution for various cordless upright vacuum cleaners and their accessories. This stand helps to keep your vacuum and tools neatly arranged and easily accessible without the need for wall drilling.
Image 1.1: The VEVOR Vacuum Stand HLFGSJLG-01 providing organized storage for a cordless vacuum and its attachments.
Image 1.2: The vacuum stand shown both as individual components and fully assembled, alongside a compatible vacuum cleaner.
2. Compatibility
This vacuum stand is compatible with a wide range of cordless upright vacuum cleaner models.
- V-Series: V6, V7, V8, V10, V11, V15
- DC-Series: DC30, DC31, DC34, DC35, DC58, DC59, DC62, DC74
Note: The vacuum stand only. Charger dock and vacuum accessories are not included.
Image 2.1: Visual representation of compatible vacuum models, including V6, V7, V8, V10, V11, and V15 series.
3. Package Contents
Verify that all components are present before beginning assembly.
- 1 x Base
- 1 x Bottom Bracket
- 1 x Middle Bracket
- 1 x Top Bracket
- 4 x Connectors
- 1 x Cross Screwdriver
- 1 x 8 mm Open Wrench
- 1 x L-shaped Hex Wrench
- 16 x Round Head Screws (M4 x 8)
- 2 x Countersunk Screws (M5 x 20)
- 4 x Screws (M6 x 25)
- 1 x User Manual
Image 3.1: Detailed view of all components and tools included in the package, along with product specifications.
4. Assembly Instructions
Follow these steps for quick and easy assembly. No drilling is required.
- Step 1: Install the Base
Attach the main support pole to the weighted base using the provided screws and tools. Ensure the base is stable. - Step 2: Attach the Hooks
Secure the accessory hooks to the main support pole at desired heights. The stand includes 6 hooks for various attachments. - Step 3: Install the Top Panel
Connect the top bracket to the upper section of the main support pole. - Step 4: Mount the Charger
If desired, mount your vacuum's charger dock onto the top panel using the appropriate screws.
Image 4.1: Step-by-step assembly guide for the VEVOR Vacuum Stand, illustrating base installation, hook attachment, top panel installation, and charger mounting.
5. Operating and Usage
The VEVOR Vacuum Stand provides convenient storage and easy access to your vacuum cleaner and its accessories.
- Vacuum Placement: Place your cordless upright vacuum cleaner onto the designated holder at the top of the stand.
- Accessory Storage: Utilize the 6 hooks to store various vacuum attachments such as flexible crevice tools, soft dusting brushes, stubborn dirt tools, and soft roller cleaner heads. Each hook supports up to 11.02 lbs (5 kg).
- Stability: The stand features a 3.96 lbs (1.8 kg) weighted base and anti-slip pads to ensure stability and prevent tipping or sliding.
- Space-Saving Design: The compact base (11.41 x 11 inches) allows the stand to fit into corners or narrow areas, optimizing vertical space.
Image 5.1: Illustration of how to organize vacuum and accessories on the stand, labeling storage points for charger, vacuum, and various tools.
Image 5.2: The stand positioned in a room corner, highlighting its compact footprint and efficient layered storage for accessories.
6. Maintenance
To ensure the longevity and appearance of your VEVOR Vacuum Stand, follow these simple maintenance guidelines:
- Cleaning: Wipe the stand regularly with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Placement: Place the stand on a flat, level surface to prevent instability.
7. Troubleshooting
If you encounter any issues with your vacuum stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Screws are loose; uneven surface. | Ensure all screws are tightened securely. Move the stand to a flat, level surface. |
| Accessories do not fit on hooks. | Incorrect accessory type; hooks not positioned correctly. | Verify that your accessories are compatible. Adjust hook positions if necessary. |
| Missing parts during assembly. | Packaging error. | Refer to the "Package Contents" section and contact VEVOR customer support if parts are missing. |
8. Specifications
Detailed specifications for the VEVOR Vacuum Stand HLFGSJLG-01:
- Model Name: Vacuum Stand
- Item Model Number: HLFGSJLG-01
- Brand: VEVOR
- Color: Black
- Main Material: Cold-rolled SPCC Steel
- Product Dimensions (L x W x H): 11.42" x 11.02" x 50" (290 x 280 x 1270 mm)
- Product Weight: 8.59 lbs (3.9 kg)
- Hook Capacity: Up to 11.02 lbs (5 kg) per hook
- Special Feature: Space-Saving
- Assembly Required: Yes
- Indoor/Outdoor Usage: Indoor
- Compatible Vacuum Brands and Models: V6, V7, V8, V10, V11, V15, DC30, DC31, DC34, DC35, DC58, DC59, DC62, DC74 Series Upright Vacuums
Image 8.1: Detail of the stand's sturdy base, indicating its weight (3.96 lbs / 1.8 kg) and thickness (0.16 in / 4 mm).
9. Warranty and Support
For warranty information or technical support, please refer to the official VEVOR website or contact their customer service directly.
Official VEVOR Website: www.vevor.com
