1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the Generic Replacement Ice Maker Control Board, designed for KitchenAid KBSD608ESS01 refrigerator models. Please read these instructions carefully before proceeding with installation to ensure proper function and safety.
2. Safety Information
- Disconnect Power: Always disconnect the refrigerator from its power source before attempting any installation or repair. Failure to do so can result in electric shock or serious injury.
- Professional Installation Recommended: Installation of this part requires knowledge of electrical systems and appliance repair. If you are not comfortable performing this repair, it is highly recommended to seek assistance from a qualified appliance technician.
- Handle with Care: Electronic components are sensitive. Avoid touching circuit board components directly and handle the board by its edges to prevent damage from static electricity.
- Verify Compatibility: Ensure this replacement part is compatible with your specific refrigerator model (KBSD608ESS01) before installation. Refer to your appliance's service manual for detailed instructions.
3. Package Contents
The package includes:
- One (1) Generic Replacement Ice Maker Control Board Set
Image 1: The complete ice maker control board set. This image displays the main control board and a smaller auxiliary board, highlighting their connectors and various electronic components.
4. Setup and Installation
Important: It is highly recommended that this part be installed by a qualified service technician.
- Disconnect Power: Unplug the refrigerator from the wall outlet or turn off the circuit breaker supplying power to the appliance.
- Access the Ice Maker: Locate and access the ice maker assembly within your refrigerator's freezer compartment. This may involve removing shelves or other components. Consult your refrigerator's service manual for specific access instructions.
- Locate the Old Control Board: Identify the existing ice maker control board. It is typically housed within or near the ice maker unit.
- Disconnect Wiring: Carefully disconnect all wiring harnesses and connectors from the old control board. Note the position and orientation of each connector to ensure correct reinstallation. Taking photos can be helpful.
- Remove Old Board: Unmount the old control board from its housing. This may involve unscrewing fasteners or releasing clips.
- Install New Board: Position the new Generic Replacement Ice Maker Control Board in the same location as the old one. Secure it using the original fasteners or clips.
- Reconnect Wiring: Carefully reconnect all wiring harnesses and connectors to the new control board, ensuring they are firmly seated and correctly oriented.
- Reassemble: Reassemble any components, shelves, or covers that were removed to access the ice maker.
- Restore Power: Plug the refrigerator back into the wall outlet or turn on the circuit breaker.
- Test Operation: Allow several hours for the refrigerator and ice maker to stabilize and begin producing ice.
5. Operation
Once correctly installed, the Generic Replacement Ice Maker Control Board operates automatically as part of your refrigerator's ice production system. It controls the ice-making cycle, including water filling, freezing, and ice ejection. No user intervention is required for its normal operation.
6. Maintenance
The ice maker control board itself requires no routine maintenance. To ensure optimal performance of your ice maker:
- Keep the freezer compartment clean and free of obstructions around the ice maker.
- Ensure the water supply line to the refrigerator is not kinked or blocked.
- Replace the refrigerator's water filter regularly as recommended by the manufacturer.
The control board contains no user-serviceable parts. Do not attempt to repair the board yourself.
7. Troubleshooting
If your ice maker is not functioning correctly after installing the new control board, consider the following:
- No Ice Production:
- Verify that the refrigerator is plugged in and receiving power.
- Check the circuit breaker for the refrigerator.
- Ensure all wiring connections to the control board are secure and correctly seated.
- Confirm the water supply valve to the refrigerator is open.
- Check if the water filter needs replacement.
- Ice Maker Not Cycling:
- Ensure the ice maker's feeler arm (if applicable) is not obstructed and can move freely.
- Verify the freezer temperature is set correctly (typically 0°F / -18°C or colder).
If these steps do not resolve the issue, it is recommended to contact a qualified appliance technician for further diagnosis and repair.
8. Specifications
| Brand | Generic |
| Compatible Model | KitchenAid KBSD608ESS01 |
| Part Number(s) | KBSD608ESS01, icepart#2412921, icepart#24120933 |
| Product Dimensions | Approximately 0.01"D x 0.01"W x 0.01"H (Note: These dimensions may be generic placeholder values.) |
| Capacity | Approximately 0.01 Milliliters (Note: This capacity may be a generic placeholder value.) |
9. Warranty and Support
For information regarding warranty coverage or technical support, please refer to the seller or retailer from whom this product was purchased. Specific warranty terms and support contacts are typically provided at the point of sale.
