Sailnovo ONLD005388

Sailnovo 12 Egg Incubator Instruction Manual

Model: ONLD005388 | Brand: Sailnovo

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your Sailnovo 12 Egg Incubator. Designed for hatching chicken, duck, and quail eggs, this incubator features automatic egg turning, precise temperature and humidity control, and a built-in egg candler. Please read this manual thoroughly before initial use to ensure optimal hatching results.

Sailnovo 12 Egg Incubator with various eggs and control panel showing 4 modes

Image: The Sailnovo 12 Egg Incubator displaying its control panel and capacity for various egg types.

2. Product Components

The Sailnovo 12 Egg Incubator package includes the following items:

  • Egg Incubator Unit
  • Protective Styrofoam Packaging (for insulation)
  • Power Adapter
  • Egg Turning Mechanism
  • Spray Bottle (for humidity adjustment)
  • Small Silicone Cover (for water port)
  • Incubation Record Card
  • Instruction Manual
Contents of the Sailnovo 12 Egg Incubator package including the incubator, spray bottle, and record cards.

Image: All components included with the Sailnovo 12 Egg Incubator.

3. Setup Guide

  1. Unpack: Carefully remove all components from the packaging. Keep the styrofoam packaging for potential use as insulation in colder environments.
  2. Assemble Egg Turning Mechanism: Place the egg turning tray into the base of the incubator. Ensure it is securely seated.
  3. Connect Power: Plug the power adapter into the incubator's power port and then into a suitable electrical outlet. The display will illuminate.
  4. Add Water: Locate the external water port on the side of the incubator. Use the provided spray bottle or a small container to add water to the water channels in the base. Do not overfill. This maintains humidity without opening the lid.
  5. Pre-heat: Allow the incubator to run for at least 20-30 minutes to stabilize the internal temperature and humidity before placing eggs inside.
Diagram showing how to add water to the external water pot of the incubator.

Image: Adding water to the external water pot.

4. Operating Instructions

4.1 Control Panel Overview

The control panel features an LED display showing internal temperature, humidity, and incubation day. Buttons allow for mode selection, temperature adjustment, and egg candling.

Close-up of the Sailnovo incubator's control panel showing temperature, humidity, and day count, along with buttons for manual test, mode switching, and candling.

Image: Detailed view of the control panel.

4.2 Mode Selection

The incubator offers four modes: three pre-set automatic modes for Chicken, Duck, and Quail eggs, and one Manual mode for custom settings.

  • Switching Modes: Press the 'Switching Incubation Modes' button once to cycle through Chicken, Duck, Quail, and Manual modes.
  • Confirm Mode: After selecting your desired mode, press and hold the 'MENU O.K.' button for 3 seconds to confirm.

Video: An overview of the Sailnovo 12 Egg Incubator's features and operation, including mode selection and egg placement.

4.3 Temperature Control (Manual Mode Only)

In Manual mode, you can adjust the temperature in 1°F increments.

  • Adjust Temperature: Use the '+' and '-' buttons to increase or decrease the temperature.
  • Confirm Temperature: Press and hold the 'MENU O.K.' button for 3 seconds to save the new temperature setting.

4.4 Humidity Control

The incubator features a built-in humidity sensor and display. Humidity can be adjusted by adding water to the external port and using the side-wall vent.

  • Monitor Humidity: The current humidity level is shown on the LED display.
  • Increase Humidity: Add water to the external water pot as needed.
  • Decrease Humidity: Open the side-wall vent to release excess moisture.
Accurate humidity display on the incubator control panel with ideal humidity ranges indicated.

Image: Accurate humidity display and recommended ranges.

Close-up of the adjustable side-wall vent on the incubator.

Image: Adjustable side-wall vent for humidity control.

4.5 Automatic Egg Turning

The incubator automatically turns eggs every 2 hours to ensure even heating and development. This feature stops automatically during the last 3 days of incubation.

Diagram showing the automatic egg turning process and auto-stop feature for the last 3 days of incubation.

Image: Automatic egg turning and auto-stop feature.

4.6 Egg Candling Function

A high-brightness LED egg candler is integrated into the incubator lid, allowing you to check embryo development without needing a separate tool.

  • Activate Candler: Press the 'Egg Candling Function' button once to turn on the LED light.
  • Candle Egg: Place an egg directly over the LED light to observe its contents.
An egg being candled on the built-in LED light of the incubator, showing internal development.

Image: Using the integrated egg candler.

5. Egg Incubation Guidelines

Refer to the Incubation Record Card for specific temperature and humidity parameters for different species. Below are general guidelines:

SpeciesIncubation DaysTemperature (Days 1-18)Humidity (Days 1-18)Temperature (Days 19-21/Hatch)Humidity (Days 19-21/Hatch)
Chicken2138.0°C / 100.4°F55%-70%37.5°C / 99.5°F65%-85%
Duck2837.8°C / 100.0°F60%-75%37.3°C / 99.1°F65%-85%
Quail1838.5°C / 101.3°F55%-70%37.8°C / 100.0°F65%-85%

Important Note: Always refer to the provided Incubation Record Card for the most accurate and up-to-date parameters for your specific egg type.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene.

  • Detachable Design: The incubator features a detachable design for easy cleaning. The base can be rinsed with water, and the top fan unit is also detachable.
  • Cleaning: After each incubation cycle, disconnect the power. Remove the egg turning mechanism and the top unit. Clean all parts with a mild disinfectant and warm water. Ensure all components are completely dry before reassembly and storage.
  • Silicone Cover: Use the small silicone cover to protect the motor shaft when cleaning the egg turning mechanism.
Image showing the detachable base of the incubator being rinsed under a faucet, highlighting its easy-to-clean design.

Image: Easy to clean detachable base.

7. Troubleshooting

If you encounter issues with your incubator, consider the following common solutions:

  • No Power: Ensure the power adapter is securely plugged into both the incubator and a working electrical outlet.
  • Temperature Fluctuations: Verify the incubator is placed in a stable environment away from drafts or direct sunlight. Check that the lid is properly sealed. If using in cold weather, consider using the styrofoam packaging for added insulation.
  • Humidity Issues: Ensure water levels in the external pot are adequate. Adjust the side-wall vent to control airflow and moisture retention.
  • Egg Turning Not Working: Check that the egg turning mechanism is correctly assembled and connected. Perform a manual test using the 'Egg Turning Manual Test' button.

8. Specifications

  • Product Dimensions: 11.22 x 7.67 x 11.22 inches
  • Item Weight: 4.51 pounds
  • Capacity: 12 standard chicken eggs (or equivalent for duck/quail)
  • Power Source: AC Adapter (included)

9. Warranty and Support

For warranty information, technical support, or any questions regarding your Sailnovo 12 Egg Incubator, please contact our customer service team.

Email: support@sailnovo.com