Tongtion Wireless HDMI Extender 4K Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Tongtion Wireless HDMI Extender 4K. This device is designed to transmit high-definition video and audio signals wirelessly, offering a flexible solution for various display needs without the constraints of cables.

Please read this manual thoroughly before using the product to ensure proper functionality and to maximize its performance and lifespan.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• 1 x Wireless HDMI Transmitter
• 1 x Wireless HDMI Receiver
• 4 x Antennas
• 2 x Power Adapters
• 2 x USB-C Cables
• 1 x User Guide (this manual)

Image: Contents of the Tongtion Wireless HDMI Extender 4K package, including transmitter, receiver, antennas, power adapters, USB-C cables, and user guide.

3. Product Overview

The Tongtion Wireless HDMI Extender 4K consists of a Transmitter (TX) and a Receiver (RX) unit, designed for seamless wireless video and audio transmission.

3.1. Device Components

Image: The Tongtion Wireless HDMI Extender 4K units, showing the transmitter and receiver with their respective antennas attached.

• Transmitter (TX): Connects to the source device (e.g., laptop, camera).
• Receiver (RX): Connects to the display device (e.g., TV, projector).
• Antennas: Four antennas (two per unit) for stable 5GHz wireless transmission.
• HDMI Ports: For connecting to source and display devices.
• 5V IN (USB-C) Ports: For power supply.
• STA/MirrorPair Button: For pairing and status indication.

3.2. Key Features

• 4K-Ready Wireless Streaming: Supports video/audio up to 3840×2160@30Hz resolution.
• Extended Range: Transmits signals up to 150 meters (492 feet) in open space.
• Universal Compatibility: Works with various HDMI-enabled devices including cameras, laptops, set-top boxes, projectors, and TVs. Supports HDMI1.4/HDCP1.4.
• 5GHz Dual-Antenna System: Ensures stable 802.11a/n transmission with minimal interference.
• Flexible Power Options: Can be powered via USB-C, power bank, or NP-F series batteries (not included).
• Plug-and-Play: No drivers or software installation required. One-button sync for easy pairing.

Image: An overview diagram highlighting the key features of the Tongtion Wireless HDMI Extender, including 4K resolution, wireless capability, dual-band support, and long-distance transmission.

4. Setup Instructions

Follow these steps to set up your Wireless HDMI Extender.

1. Attach Antennas: Screw the four antennas onto the designated ports on both the Transmitter (TX) and Receiver (RX) units. Ensure they are securely fastened.
2. Connect Transmitter (TX):
   • Connect one end of an HDMI cable to the HDMI OUT port of your source device (e.g., laptop, camera, set-top box).
   • Connect the other end of the HDMI cable to the HDMI IN port on the Wireless HDMI Transmitter.
   • Power the Transmitter: Connect a USB-C cable to the 5V IN port on the Transmitter and the other end to a power adapter, power bank, or NP-F battery (not included).
3. Connect Receiver (RX):
   • Connect one end of an HDMI cable to the HDMI IN port of your display device (e.g., TV, projector, monitor).
   • Connect the other end of the HDMI cable to the HDMI OUT port on the Wireless HDMI Receiver.
   • Power the Receiver: Connect a USB-C cable to the 5V IN port on the Receiver and the other end to a power adapter, power bank, or NP-F battery (not included).
4. Power On: Ensure both the Transmitter and Receiver units are powered on. The indicator lights will illuminate.
5. Pairing (Automatic): The units are designed for automatic pairing. Once both are powered on and connected, they should establish a connection within a few seconds. The STA/MirrorPair indicator will show connection status. If pairing does not occur automatically, press the STA/MirrorPair button on both units simultaneously to initiate manual pairing.

Image: A visual representation of the plug-and-play setup, demonstrating how easily the transmitter and receiver connect to source and display devices.

5. Operating Instructions

Once setup is complete, the Wireless HDMI Extender operates automatically.

• Signal Transmission: The Transmitter will automatically detect the HDMI signal from your source device and send it wirelessly to the Receiver.
• Display Output: The Receiver will output the received signal to your connected display device. Ensure your display is set to the correct HDMI input.
• Resolution: The system supports resolutions up to 4K (3840x2160) at 30Hz. The output resolution will match the source resolution or the maximum supported by the display, whichever is lower.
• HDCP Support: The device supports HDCP1.4, allowing for the transmission of protected content from streaming services and Blu-ray players.
• Range: For optimal performance, ensure the Transmitter and Receiver are within the specified range of 150 meters (492 feet) line-of-sight. Obstructions can reduce this range.

Image: A visual demonstrating the 4K Full HD capability of the extender, showing a high-resolution image on a display.

Image: An illustration showing HDCP 1.4 compliance, indicating support for various video streaming applications.

6. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

• No Signal/Black Screen:
  • Ensure both Transmitter and Receiver are powered on and their indicator lights are active.
  • Verify all HDMI and USB-C cables are securely connected.
  • Confirm the display device is set to the correct HDMI input.
  • Try re-pairing the units by pressing the STA/MirrorPair button on both devices.
  • Reduce the distance between the Transmitter and Receiver, and remove any major obstructions.
• Poor Picture Quality/Intermittent Signal:
  • Ensure antennas are securely attached and oriented for best reception.
  • Minimize interference from other 5GHz wireless devices.
  • Check the distance and line-of-sight between units. Walls, furniture, and other objects can degrade signal quality.
  • Ensure the power supply is stable and sufficient for both units.
• Audio Issues:
  • Verify audio settings on your source device and display.
  • Ensure HDMI cables support audio transmission.
• Lag/Latency:
  • While the device offers low latency, some minimal delay compared to a direct wired connection is inherent in wireless transmission. This product is not recommended for gaming where ultra-low latency is critical.
  • Ensure optimal signal strength as described above.
• Device Not Powering On:
  • Check power connections and ensure power adapters are working.
  • Try a different USB-C cable or power source.

7. Specifications

8. Maintenance

To ensure the longevity and optimal performance of your Wireless HDMI Extender, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the units. Avoid liquid cleaners or abrasive materials.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Handling: Handle the units and antennas with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
• Ventilation: Ensure proper ventilation around the units during operation to prevent overheating. The sophisticated cooling design helps, but clear airflow is still beneficial.

Image: A close-up view highlighting the sophisticated cooling design of the extender, which aids in maintaining optimal operating temperature.

9. Warranty and Support

Your Tongtion Wireless HDMI Extender 4K comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards.

For any technical assistance, troubleshooting, or warranty claims, please contact Tongtion customer support. We offer Lifetime Support to ensure your satisfaction with our product.

Contact information can typically be found on the Tongtion official website or through your purchase platform.