Sportspower Fairbrook Metal Swing Set Instruction Manual

1. Important Safety Information

Read and understand all instructions before assembly and use. Failure to follow these instructions may result in serious injury.

• Age Range: This swing set is designed for children aged 3 to 8 years old.
• Weight Capacity: The maximum weight capacity for the entire swing set is 500 lbs, with a maximum of 100 lbs per child. Up to five children can play simultaneously.
• Supervision: Adult supervision is required at all times.
• Installation: Ensure the swing set is installed on level ground, at least 6 feet away from any structures or obstructions such as fences, garages, houses, overhead branches, or laundry lines.
• Anchoring: Always use the provided 4-piece anchor kit to secure the swing set firmly into the ground to prevent tipping or movement during use.
• ASTM Standards: This product meets or exceeds all ASTM safety standards.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2. Product Overview

The Sportspower Fairbrook Metal Swing Set provides a variety of activities for children, including a slide, a blow-molded swing, a stand-or-swing, and a 32-inch flying saucer swing.

Figure 2.1: The swing set features a safe and sturdy A-frame design, constructed from heavy-duty 2-inch steel tubes with a rust-resistant, powder-coated finish for enhanced durability and weather resistance.

Figure 2.2: The 5-foot blow-molded slide features a double-walled design for durability, 2-inch safety edges on each side, and a safe landing zone. It is easy to assemble with a 1-piece design.

Figure 2.3: The set includes a 32-inch flying saucer swing, padded and reinforced with inner netting, designed to comfortably fit up to two children. Also shown is a stand-or-swing, allowing kids to sit or stand while swinging.

Figure 2.4: The unique patented "Bird's Nest" design of the saucer swing features a deep seat that cradles children and a bowl shape to help prevent slips or falls, ensuring a snug and secure experience.

3. Setup and Assembly

Assembly typically takes a few hours and can be completed by one person, though two people may make the process easier. Ensure all parts are present before beginning.

3.1. Unpacking and Part Identification

• Carefully unpack all components from the box.
• Refer to the included parts list to identify and verify all pieces are present. Contact customer support immediately if any parts are missing or damaged.

3.2. Assembly Steps

1. Frame Assembly: Assemble the main A-frame structure using the provided hardware. Ensure all bolts are securely tightened.
2. Slide Attachment: Attach the 5-foot blow-molded slide to the main frame. The slide is a 1-piece design for easier assembly.
3. Swing Installation: Attach the blow-molded swing, stand-or-swing, and 32-inch saucer swing to the frame. Ensure all chains are securely fastened and vinyl-covered for safety.
4. Bolt Coverings: Install the blue coverings for all exposed bolts to enhance safety and appearance.
5. Ground Anchoring: Once the swing set is fully assembled and positioned in its desired location, use the 4-piece anchor kit to secure it to the ground. This is crucial for stability during play.

Figure 3.1: The 4-piece anchor kit is essential for securing the swing set to the ground, providing stability and preventing movement during active play.

4. Operating Instructions

Ensure children use the swing set safely and appropriately.

• Swings:
• Only one child per swing seat (blow-molded swing, stand-or-swing).
• The saucer swing can accommodate up to two children.
• Instruct children to hold onto the chains firmly while swinging.
• Avoid twisting chains or excessive swinging that could cause entanglement or instability.
• Slide:
• Only one child should slide at a time.
• Children should slide feet first, sitting upright.
• Ensure the landing area is clear before sliding.
• General Use:
• Do not allow children to climb on the frame or other parts not intended for climbing.
• Ensure children wear appropriate clothing, avoiding loose items that could get caught.
• Regularly check the play area for debris or hazards.

5. Maintenance

Regular maintenance ensures the longevity and safety of your swing set.

• Monthly Checks: Inspect all nuts and bolts for tightness. Tighten as necessary.
• Seasonal Checks: At the beginning of each play season, and twice monthly during active use, check all connections, chains, ropes, and moving parts for wear, damage, or signs of rust. Replace any worn or damaged components immediately.
• Cleaning: Clean the swing set regularly with mild soap and water. Avoid harsh chemicals that could damage the finish.
• Rust Prevention: The steel frame is powder-coated for rust resistance. However, inspect for any chips or scratches in the coating and touch up with rust-inhibiting paint if necessary to prevent rust.
• Ground Anchors: Periodically check that the ground anchors remain firmly in place.

6. Troubleshooting

Common issues and their solutions.

• Swing Set Feels Unstable:
• Ensure the swing set is on level ground.
• Verify that all ground anchors are fully inserted and secure.
• Check all frame bolts and connections for tightness.
• Squeaking Noises:
• Apply a small amount of lubricant (e.g., silicone spray) to moving parts where chains connect to the frame.
• Missing or Damaged Parts:
• If parts are missing upon delivery or become damaged during use, contact Sportspower customer support for assistance.

7. Specifications

8. Warranty Information

• Powder-Coated Steel Frame: Comes with a 1-year limited warranty.
• Slide: Comes with a limited lifetime warranty.
• For warranty claims or details, please contact Sportspower customer support. Keep your proof of purchase.

9. Customer Support

For assistance with assembly, missing parts, troubleshooting, or warranty inquiries, please contact Sportspower customer support.

Figure 9.1: Sportspower offers USA-based customer support to provide fast and helpful assistance for any product-related questions or issues.

Contact information can typically be found on the product packaging or the official Sportspower website.