Introduction
This manual provides detailed instructions for the safe and effective use of your Pryfey Hand Massager. Please read this manual thoroughly before operation and retain it for future reference.
The Pryfey Hand Massager is designed to provide therapeutic hand massage with compression and heat, aiming to alleviate discomfort associated with conditions such as arthritis and carpal tunnel, and to promote general hand relaxation.
Important Safety Information
To reduce the risk of electric shock, burns, fire, or injury, always follow these basic safety precautions:
- Read all instructions before using the appliance.
- Do not use while sleeping or drowsy.
- Do not use on infants, invalids, or on a sleeping or unconscious person.
- Do not use on sensitive skin areas or in the presence of poor circulation.
- Never use if the appliance has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
- Keep away from water. Do not use in wet conditions.
- Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
- Consult a physician before using if you have any medical conditions, including but not limited to heart disease, diabetes, or if you are pregnant.
- This device is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease.
Package Contents
Verify that all items are present upon unboxing:
- Pryfey Hand Massager (Model SOB-01)
- USB Type-C Charging Cable
- User Manual
Image: The Pryfey Hand Massager, USB Type-C charging cable, and user manual laid out on a surface.
Product Overview
The Pryfey Hand Massager features an intuitive control panel and ergonomic design for comfortable use.
Image: A close-up of the hand massager showing the control panel with buttons for power, mode, intensity, and heat, along with the LCD display.
Key Components:
- Control Panel: Central interface for all functions.
- LCD Display: Shows current mode, intensity, heat level, and timer.
- Hand Insertion Ports: Designed for comfortable placement of either hand.
- USB-C Charging Port: Located on the side for convenient charging.
- Air Compression Chambers: Internal airbags provide compression massage.
- Heating Elements: Integrated for therapeutic heat.
Setup
1. Initial Charge:
Before first use, fully charge the device. Connect the provided USB Type-C cable to the charging port on the massager and to a compatible USB power adapter (not included). The battery indicator on the LCD display will show charging status.
A full charge typically takes 3-4 hours and provides 6-8 hours of cordless operation.
Image: The hand massager connected to a charging cable, illustrating the charging process.
2. Hand Placement:
Ensure your hand is clean and dry. Gently slide your hand into the massager, making sure your palm rests comfortably on the internal nodes and your fingers are aligned with the finger holes. The device is designed to accommodate both left and right hands.
Image: A hand comfortably inserted into the Pryfey Hand Massager, ready for use.
Operating Instructions
1. Power On/Off:
- To turn on: Press and hold the Power Button (red circle) for 2-3 seconds until the LCD display illuminates.
- To turn off: Press and hold the Power Button for 2-3 seconds. The device will also automatically shut off after 15 minutes of continuous operation.
2. Selecting Massage Modes:
The device offers 9 distinct massage modes (P1-P9). Each mode provides a unique combination of compression patterns.
- Press the Mode Button (labeled 'M') to cycle through the available modes. The current mode will be displayed on the LCD screen.
3. Adjusting Intensity Levels:
Customize the massage strength with 9 intensity levels (L1-L9).
- Press the Intensity Button (three vertical bars) to increase or decrease the compression intensity. The current level will be shown on the LCD screen.
4. Activating Heat Function:
Enhance your massage with 3 therapeutic heat levels (H1-H3).
- Press the Heat Button (sun icon) to activate or adjust the heat level. Pressing it repeatedly will cycle through H1 (low), H2 (medium), H3 (high), and off.
Video: A demonstration of the Pryfey Hand Massager's 9 modes, 9 intensities, and heat function, showing the control panel in action.
5. Automatic Timer:
The device is equipped with a 15-minute automatic shut-off timer to prevent overuse and conserve battery. You can restart the device for another session if desired.
Maintenance
Cleaning:
- Ensure the device is turned off and unplugged before cleaning.
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- The internal fabric lining can be gently wiped with a slightly damp cloth and allowed to air dry completely before next use.
Storage:
- Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep out of reach of children.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or not charged. | Charge the device fully using the provided USB-C cable. Ensure the power button is pressed and held for 2-3 seconds. |
| Weak or no compression. | Low intensity setting or improper hand placement. | Increase the intensity level using the Intensity Button. Ensure your hand is fully inserted and positioned correctly. |
| Heat function not working. | Heat function is off or set to a low level. | Press the Heat Button to activate and cycle through the heat levels (H1, H2, H3). Allow a few minutes for the heat to become noticeable. |
| Device shuts off unexpectedly. | Automatic 15-minute timer activated or low battery. | This is normal operation due to the built-in timer. Recharge the device if the battery is low. |
Specifications
- Model: SOB-01
- Brand: pryfey
- Product Dimensions: 7.48 x 5.51 x 3.93 inches
- Weight: 1.72 Pounds
- Battery: 3000mAh Lithium Battery
- Operating Time: 6-8 hours (per charge)
- Charging Port: USB Type-C
- Massage Modes: 9
- Intensity Levels: 9
- Heat Levels: 3
- Automatic Timer: 15 minutes
- Manufacturer: FUAN RUILI ELECTRONICS CO.LTD
Warranty and Support
The Pryfey Hand Massager (Model SOB-01) comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact customer support for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Pryfey customer service through the retailer where the product was purchased or visit the official Pryfey website.