Funko Pop! Rainbow Brite with Sprite Diamond Collection 1796 Instruction Manual

Introduction

This manual provides essential information for the proper care, display, and handling of your Funko Pop! Rainbow Brite with Sprite Special Edition Diamond Collection vinyl figure. This collectible item features Rainbow Brite and her companion Sprite, presented with a special glitter finish, designed for display purposes.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not suitable for children under 36 months (3 years).

• Recommended Age: 3+ years.
• Keep the figure and its accessories away from infants and small children due to small components.
• Avoid placing the figure in direct sunlight or areas with extreme temperatures to prevent material degradation or color fading.
• Keep away from pets to prevent accidental damage or ingestion of parts.

Package Contents

Upon opening the package, verify that all components are present:

• 1 x Funko Pop! Rainbow Brite Vinyl Figure
• 1 x Sprite Accessory Figure
• 1 x Collectible Window Display Box

Setup

Follow these steps to set up your Funko Pop! figure for display:

1. Carefully open the collectible window display box and remove the plastic insert containing the figures.
2. Gently extract the Rainbow Brite figure and the Sprite accessory from the plastic insert.
3. If a clear display base is included, ensure the Rainbow Brite figure's feet are securely placed onto the pegs of the base for stability.
4. Position the Sprite accessory next to Rainbow Brite as desired.
5. Choose a stable, flat, and clean surface for displaying your figure, away from direct sunlight, excessive heat, or moisture.

Operating

The Funko Pop! Rainbow Brite with Sprite figure is a static collectible item designed for display. It does not require batteries or assembly beyond initial placement on its base. It is not intended for active play or manipulation.

• Handle the figure with care to avoid damage to the vinyl material, painted details, or glitter finish.
• Avoid dropping the figure, as this may cause breakage or paint chipping.

Maintenance

Proper maintenance will help preserve the condition of your collectible figure:

• Cleaning: To clean the figure, gently wipe it with a soft, dry, lint-free cloth. For stubborn dust, a very slightly damp cloth can be used, followed immediately by a dry cloth.
• Avoid Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the vinyl material, paint, or glitter finish.
• Dust Control: To minimize dust accumulation, consider displaying the figure in a dust-protected environment or regularly dusting it.

Troubleshooting

Below are solutions to common concerns regarding your Funko Pop! figure:

• Figure Unstable on Base: Ensure the figure's feet are fully inserted and aligned with the pegs on the display base. If the base is warped, try gently bending it back into shape or using a small amount of adhesive for permanent display.
• Dust Accumulation: Refer to the Maintenance section for cleaning instructions.
• Minor Imperfections: Funko Pop! figures are mass-produced and often hand-painted. Slight variations in paint application, minor blemishes, or small imperfections are common and generally considered part of the product's unique characteristics. These are typically not considered manufacturing defects.

Specifications

Warranty

Funko Pop! figures are collectible items. Please inspect your figure thoroughly upon receipt. For any issues related to manufacturing defects, please contact the retailer from whom you purchased the item within their specified return or exchange period. Funko does not typically offer direct warranties for minor paint variations or box imperfections that occur during manufacturing or shipping.

Support

For further assistance, inquiries, or to report significant product defects, please refer to the customer service contact information provided by your retailer. You may also visit the official Funko website for general information about their products.