Introduction
This user manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your UREVO Under Desk Treadmill. Please read this manual thoroughly before initial use and retain it for future reference.
Important Safety Instructions
To reduce the risk of serious injury, always follow basic precautions when using this appliance, including the following:
- Read all instructions before using the treadmill.
- Keep children and pets away from the treadmill during operation.
- Place the treadmill on a flat, stable surface.
- Ensure adequate clearance around the treadmill (at least 2 feet on all sides).
- Do not operate the treadmill if it has a damaged cord or plug, or if it is not working properly.
- Always wear appropriate athletic footwear.
- Do not step on or off the treadmill while the belt is moving.
- Unplug the treadmill from the power outlet when not in use or before cleaning.
Setup Guide
1. Unpacking
Carefully remove the treadmill from its packaging. Inspect for any damage during transit. Retain packaging materials for future storage or transport.
2. Placement
Place the treadmill on a firm, level surface. Ensure there is sufficient space around the unit for safe operation and access. Avoid placing it on thick carpets that may obstruct ventilation.
3. Initial Connection
Connect the power cord to the treadmill's power input, then plug it into a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
Image: The UREVO Under Desk Treadmill positioned for use, highlighting its compact form factor suitable for office environments. This image demonstrates how the treadmill fits neatly under a standing desk, allowing for walking while working.
Operating Instructions
1. Power On/Off
Locate the main power switch, usually at the front or rear of the treadmill. Flip the switch to the 'ON' position. The LED display will illuminate.
2. Using the Remote Control
The treadmill is operated via the included remote control. Ensure the remote has working batteries.
- START/STOP: Press to begin or end a walking session.
- SPEED +/-: Adjust the walking speed. Press '+' to increase speed, '-' to decrease speed.
- MODE: Cycle through display modes (e.g., time, distance, calories).
3. Starting a Workout
- Step onto the treadmill belt carefully.
- Press the 'START' button on the remote control. The treadmill will typically start at a low speed.
- Adjust the speed using the '+' and '-' buttons to your desired pace.
4. Stopping a Workout
To stop, press the 'STOP' button on the remote control. The belt will gradually slow down and come to a complete stop. Step off the treadmill once the belt has stopped moving.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your treadmill.
1. Cleaning
Wipe down the treadmill's surfaces with a damp cloth after each use. Do not use abrasive cleaners or solvents. Keep the area around the motor cover free of dust and debris.
2. Belt Lubrication
The walking belt requires periodic lubrication to reduce friction and wear. Refer to the specific lubrication instructions provided with your treadmill's lubricant. Typically, this is done every few months depending on usage.
3. Belt Adjustment
If the walking belt begins to slip or drift to one side, it may require adjustment. Use the provided Allen wrench to turn the rear roller bolts. Turn clockwise to tighten, counter-clockwise to loosen. Adjust in small increments until the belt is centered and taut.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Treadmill does not power on. | Power cord not plugged in; Power switch off; Circuit breaker tripped. | Ensure power cord is securely plugged in; Turn power switch to ON; Check household circuit breaker. |
| Belt slips during use. | Belt too loose; Belt needs lubrication. | Adjust belt tension (see Maintenance section); Lubricate the walking belt. |
| Remote control not working. | Batteries dead or incorrectly inserted; Remote not paired. | Replace batteries; Ensure correct battery polarity; Refer to pairing instructions (if applicable). |
Specifications
- Brand: UREVO
- Model: B0DX24PYKD
- Maximum Speed: 16.67 Miles per Hour
- Assembly Required: No
- Folded Size: 60 x 30 x 12 inches
- Date First Available: February 13, 2025
Warranty Information
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official UREVO website. Keep your proof of purchase for warranty claims.
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact UREVO customer support. You can typically find contact information on the official UREVO website or through your purchase platform.
Visit the UREVO Store on Amazon for more information.