TDH Smart Toilet T02 PRO Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TDH Smart Toilet T02 PRO. Please read this guide thoroughly before use to ensure proper function and longevity of your product. The TDH Smart Toilet T02 PRO features strong flush technology, smart sensor operation, personalized cleaning modes, instant warm bidet, heated seat, dryer, and a gentle night light for enhanced comfort and hygiene.

Setup and Installation

Proper installation is crucial for the optimal performance of your smart toilet. Ensure you have all necessary accessories and tools before beginning.

Pre-Installation Checks

• Confirm a power outlet is within reach of the unit.
• Verify the rough-in measurement matches the product specifications (standard 12 inch / 305mm).
• Ensure water pressure requirements are met: 5L water output in 15 seconds, and water inlet pressure of 0.15-0.75MPa.
• The angle valve is American standard 3/4 outlet and 1/2 inlet. A 7/8 to 3/4 adapter is provided.

Installation Steps

Follow these steps for a successful installation. Refer to the provided videos for visual guidance.

Product Dimensions and Easy Installation

Image Description: An image showing the TDH Smart Toilet with detailed dimensions (26.7in x 16.5in x 17.9in) and a diagram illustrating the easy installation process, including rough-in measurements.

Operating Instructions

Your TDH Smart Toilet T02 PRO offers various intelligent functions for a comfortable and hygienic experience. It can be operated via foot sensor or remote control.

Foot Sensor Operation

• Automatic Lid Opening: The lid will automatically flip open when a user approaches the toilet.
• Seat Ring Opening: Kick the foot sensor to open the seat ring.
• Seat Ring Closing: Kick the foot sensor again within 15 seconds to close the seat ring.
• Automatic Flushing: After sitting for more than 15 seconds and leaving the toilet, it will perform an automatic flush.

Remote Control Operation

The remote control provides access to all smart toilet functions. Ensure the remote is paired with the toilet. If there is no reaction, perform the code matching process as described in the "Remote Control Operation" section. Ensure the toilet's power supply is on.

Key Functions:

• Cleaning Modes: Rear, Feminine, Massage wash modes with self-cleaning nozzle. 5 levels of adjustable position and pressure.
• Heated Seat: 4 levels adjustable seat temperature (86°F-104°F).
• Warm Water Sprayer: Instant and consistent heating with 4 levels adjustable water temperature.
• Hot Air Dryer: 4 levels adjustable hot air drying (room temperature - 131℉).
• Night Light: Gentle night light guides you safely without disturbing sleep.
• Auto-Flush: Walk-away auto-flush function.
• Lid Operation: Touch-free lid operation.
• LCD Display: Shows real-time readings in Fahrenheit for comfort control.

LED Digital Display and Temperature Control

Image Description: Close-up of the toilet's LED display showing real-time water and seat temperatures, indicating contactless operation.

Heated Seat and Hot Air Drying

Image Description: Visual representation of the heated seat function and the hot air drying vent, highlighting comfort features.

Multiple Cleaning Modes

Image Description: An illustration detailing the different bidet functions, including rear wash, feminine wash, massage, and automatic nozzle self-cleaning.

Powerful Vortex Flush

Image Description: The toilet bowl during a 360-degree vortex flush, illustrating the powerful and efficient cleaning action.

Maintenance

Regular maintenance ensures the longevity and hygienic operation of your TDH Smart Toilet T02 PRO.

Foam Shield Replacement

The foam shield helps prevent splashing and keeps the bowl cleaner. Replace the foam liquid as needed.

General Cleaning

• The ceramic surface is easy to clean. Use mild, non-abrasive cleaners.
• The pre-wetting system helps keep the bowl cleaner longer by spraying water before use to prevent dirt from sticking.
• The bidet nozzle has a self-cleaning function.

Troubleshooting

If you encounter issues with your TDH Smart Toilet T02 PRO, refer to the following common solutions:

• Insufficient Flushing Power: Check your home's water pressure and flow rate. The toilet requires 5L water output in 15 seconds and an inlet pressure of 0.15-0.75MPa. Ensure all water connections are secure and not kinked.
• Remote Control Not Responding: Perform the code matching process as described in the "Remote Control Operation" section. Ensure the toilet's power supply is on.
• Power Outage: In case of a power failure, connect backup batteries to enable basic flushing functions.
• Lid/Seat Not Opening/Closing Automatically: Check for obstructions around the sensors. Ensure the automatic sensing lid opening function is enabled via the remote control (long press the lid flipping button until the indicator light flashes).
• No Foam Shield: Ensure the foam liquid bottle is correctly installed and not empty.

For further assistance, please contact customer support.

Specifications

Warranty and Support

TDH is committed to providing excellent customer service and product reliability.

• Warranty: Enjoy 12-month free accessories parts service.
• Customer Support: 24/7 customer support is available for your peace of mind.

For any inquiries or support needs, please refer to your purchase documentation or visit the official TDH website.