1. Introduction
This manual provides instructions for the proper installation, use, and maintenance of the FSE BD-102 Adjustable Wine Dividers. Please read this manual thoroughly before using the product to ensure correct operation and longevity.
2. Product Overview
The FSE BD-102 is a set of three adjustable wine dividers crafted from durable stainless steel. These dividers are designed to organize and separate wine bottles within back bar cooler drawers, helping to maintain order and prevent bottles from shifting. They are particularly recommended for larger drawer sizes to maximize their utility.
Image 1: A single FSE BD-102 Adjustable Wine Divider, showcasing its stainless steel construction and flat design.
3. Safety Information
- Always handle the dividers with care to avoid sharp edges.
- Ensure the dividers are securely placed within the drawer to prevent movement that could damage bottles or the cooler.
- Keep out of reach of children.
- Do not use for purposes other than intended.
4. Setup & Installation
- Unpack: Carefully remove the three FSE BD-102 wine dividers from their packaging. Inspect each divider for any signs of damage.
- Prepare Drawer: Ensure the back bar cooler drawer where the dividers will be installed is clean and free of obstructions.
- Position Dividers: Place the first divider inside the cooler drawer. The dividers are designed to be adjustable, allowing you to customize the width of the compartments.
- Adjust Spacing: Position subsequent dividers to create appropriately sized compartments for your wine bottles. The dividers should fit snugly but not be forced, allowing for easy adjustment as needed. These dividers are recommended for larger drawers to provide ample space for adjustment and bottle storage.
- Secure Placement: Once positioned, ensure the dividers are stable and will not easily shift during drawer operation.
5. Operating Instructions
Once installed, the FSE BD-102 dividers function by creating organized sections within your back bar cooler drawer. Simply place your wine bottles into the compartments created by the dividers. The adjustable nature allows for rearrangement if your bottle sizes or storage needs change.
6. Maintenance and Cleaning
To ensure the longevity and hygiene of your FSE BD-102 wine dividers, follow these cleaning guidelines:
- Regular Cleaning: Wipe down the stainless steel dividers regularly with a soft cloth and mild soap and water solution.
- Stubborn Stains: For more stubborn stains, use a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain.
- Drying: Dry the dividers thoroughly with a clean, dry cloth immediately after cleaning to prevent water spots and maintain their luster.
- Avoid: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can scratch or damage the stainless steel surface.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Dividers do not fit in drawer. | Drawer size is too small for the BD-102 model. | Verify your drawer dimensions against product specifications. These dividers are recommended for larger drawers. |
| Dividers are unstable or shift. | Improper placement or insufficient tension. | Re-adjust the dividers to ensure a snug fit within the drawer. Ensure bottles are placed evenly. |
| Stainless steel appears dull or stained. | Improper cleaning agents or water spots. | Refer to the "Maintenance and Cleaning" section for proper cleaning procedures. Use a stainless steel cleaner if necessary. |
8. Specifications
- Model: BD-102
- Brand: FSE
- Material: Stainless Steel
- Quantity: Set of 3 dividers
- Application: Back Bar Cooler Drawers (recommended for bigger drawers)
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your FSE BD-102 Adjustable Wine Dividers, please contact FSE customer service. Refer to the product packaging or the official FSE website for contact details.
FSE Official Website: Visit the FSE Store on Amazon
