1. Introduction
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Signature Hardware Drea Thermostatic Valve Trim. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Product Overview
The Drea Thermostatic Valve Trim is designed to complement your shower system, providing precise temperature control. This trim utilizes thermostatic technology to maintain a consistent water temperature, enhancing your showering experience. It features a sleek lever handle and a durable, corrosion-resistant finish. Please note that this product is a trim kit only and requires a separate rough-in valve for complete functionality.
Figure 1: Signature Hardware Drea Thermostatic Valve Trim in Brushed Gold. This image displays the Signature Hardware Drea Thermostatic Valve Trim in a Brushed Gold finish, mounted on a white tiled wall. The circular escutcheon plate features a single lever handle on the left side, used for temperature control. The finish is a warm, matte gold.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | Signature Hardware |
| Model Number | 955144 (SHDR9009BG) |
| UPC | 781889999400 |
| Color | Brushed Gold |
| Material | Metal |
| Finish Type | Brushed |
| Number of Handles | 1 |
| Valve Trim Height | 6-11/16" |
| Valve Trim Width | 13/16" |
| Item Weight | 2.67 pounds |
| Product Dimensions | 1 x 1 x 1 inches |
4. Safety Information
WARNING:
- Always turn off the main water supply before attempting any plumbing installation or repair.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 Warning). Wash hands after handling.
5. Installation (Setup)
This section outlines the general steps for installing the Drea Thermostatic Valve Trim. Ensure that the compatible rough-in valve (not included with this trim kit) has been correctly installed according to its own instructions before proceeding.
Required Components (Not Included):
- Compatible Thermostatic Rough-In Valve
- Separate Volume Control Valve and Trim
Installation Steps:
- Prepare the Rough-In Valve: Ensure the rough-in valve is securely installed in the wall and all plumbing connections are complete and leak-free.
- Install the Escutcheon Plate: Place the escutcheon plate (the decorative cover) over the rough-in valve body, aligning it with the mounting holes. Secure it using the provided screws. Ensure the plate is flush against the finished wall.
- Install the Handle Assembly: Attach the thermostatic cartridge and handle assembly to the valve stem according to the rough-in valve's instructions. The Drea trim's single lever handle controls temperature only.
- Test for Leaks and Functionality: Turn on the main water supply and carefully check all connections for leaks. Test the temperature control function of the handle.
Note: For detailed instructions regarding the rough-in valve and volume control, refer to their respective installation manuals.
6. Operation
The Drea Thermostatic Valve Trim is designed for intuitive temperature control. This trim works in conjunction with a separate volume control valve.
- Temperature Control: The single lever handle on the Drea trim is used exclusively to adjust the water temperature. Rotate the handle to achieve your desired temperature.
- Water Flow Control: Water flow (on/off and volume) is managed by a separate volume control valve and its corresponding trim, which must be installed alongside the thermostatic trim.
The thermostatic cartridge within the rough-in valve will automatically adjust the hot and cold water mix to maintain a consistent temperature, even if there are fluctuations in water pressure.
7. Maintenance
Proper care and maintenance will ensure the lasting beauty and performance of your Drea Thermostatic Valve Trim.
- Cleaning: Clean the trim regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. Mild soap and water are recommended.
- Finish Protection: The brushed gold finish is designed to resist corrosion and tarnishing. To maintain its appearance, wipe away water spots after each use.
- Cartridge Maintenance: If you experience issues with temperature control or water flow (after verifying the volume control valve), the thermostatic cartridge may need cleaning or replacement. Consult a qualified plumber for cartridge-related maintenance.
8. Troubleshooting
If you encounter issues with your Drea Thermostatic Valve Trim, consider the following common solutions:
- Inconsistent Water Temperature:
- Ensure the hot and cold water supplies are fully open.
- Verify that the thermostatic cartridge is properly installed and free of debris.
- Check the temperature limit stop setting on the rough-in valve (refer to rough-in valve manual).
- No Water Flow or Low Flow:
- Confirm that the separate volume control valve is open.
- Check the main water supply to the house.
- Inspect the rough-in valve for any obstructions or issues (refer to rough-in valve manual).
- Leaking from Handle or Escutcheon:
- Ensure all trim components are securely tightened.
- Check the O-rings and seals within the rough-in valve and cartridge for damage or improper seating.
If these steps do not resolve the issue, it is recommended to contact a qualified plumber or Signature Hardware customer support.
9. Warranty Information
The Signature Hardware Drea Thermostatic Valve Trim is covered under Signature Hardware's 25-year warranty. This warranty ensures that the product is free from defects in material and workmanship under normal use and service. For complete warranty terms and conditions, please refer to the official Signature Hardware website or contact their customer service.
10. Support
For further assistance, technical support, or to inquire about replacement parts, please contact Signature Hardware customer service or visit their official website:
- Website: www.signaturehardware.com
- Customer Service: Refer to the website for contact details.
