MELLCOM Patio Bistro Sets

MELLCOM 3 Piece Patio Set Instruction Manual

Model: Patio Bistro Sets

Product Overview

The MELLCOM 3 Piece Patio Set is designed for outdoor use, featuring two C-spring metal chairs and a round side table. This set is suitable for various outdoor spaces such as balconies, front porches, poolside areas, gardens, and decks. The chairs offer an ergonomic C-spring design for comfort, and the entire set is constructed with durable metal for longevity.

Safety Information

Please read and understand all safety warnings before assembly and use.

  • Exercise caution around sharp edges during assembly and handling.
  • Do not exceed the maximum weight limit of 350 lbs (approximately 158 kg) per chair.
  • Wear protective gloves during assembly to prevent scratches or injuries.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
  • Place the furniture on a flat, stable surface to prevent tipping.

Components List

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Bistro Chairs: 2 units
  • Bistro Table: 1 unit
  • Assembly Hardware (screws, washers, wrench): 1 set
MELLCOM 3 Piece Patio Set components

Image: All components of the MELLCOM 3 Piece Patio Set, including two chairs and one round table.

Setup and Assembly

Assembly of the MELLCOM 3 Piece Patio Set is designed to be straightforward with step-by-step instructions included. It is recommended to have a second person assist with assembly for ease and safety.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
  2. Identify Parts: Refer to the included hardware and parts list to identify each component.
  3. Assemble Chairs:
    • Attach the seat frame to the backrest frame using the provided screws and wrench. Do not fully tighten screws yet.
    • Connect the C-spring base to the assembled seat and backrest. Ensure proper alignment.
    • Once all connections are made, gradually tighten all screws until secure. Avoid over-tightening.
  4. Assemble Table:
    • Attach the table legs to the tabletop.
    • Secure the cross-stand base to the table legs.
    • Tighten all screws firmly.
  5. Final Check: Ensure all screws are tight and the furniture is stable before use.
Dimensions of MELLCOM patio chair and table

Image: Detailed dimensions for the MELLCOM patio chair and round side table, showing height, width, and depth.

Round side table assembly details

Image: Close-up of the round side table, highlighting its smooth edge and stable cross-stand with foot pads.

Operating Instructions

The MELLCOM Patio Set is designed for comfortable outdoor seating and relaxation.

  • C-Spring Chairs: The chairs feature an ergonomic C-spring design, allowing for a gentle rocking motion. Sit back and relax, enjoying the subtle sway.
  • Weight Capacity: Each chair is designed to support up to 350 lbs. Do not exceed this limit.
  • Table Use: The round side table is ideal for holding beverages, books, or small decorative items. The table has a weight capacity of 110 lbs.
  • Placement: Position the set on a level surface to ensure stability.
C-spring motion chair in action

Image: Illustration of the C-spring motion chair demonstrating its gentle swaying capability.

Wide seat and high backrest for comfort

Image: Close-up view of the chair's wide seat and high backrest, designed for enhanced comfort.

Maintenance

Proper maintenance will extend the life and appearance of your patio set.

  • Cleaning: Wipe down the metal frames with a soft cloth and mild soap and water solution. Rinse thoroughly with clean water and dry completely to prevent water spots and rust.
  • Rust Prevention: The set features electrophoretic paint for corrosion and rust resistance. However, to further prevent rust, avoid prolonged exposure to standing water. The hollow seat design helps with water drainage.
  • Storage: During harsh weather conditions (heavy rain, snow, extreme cold), it is recommended to cover the furniture or store it indoors to protect it from the elements.
  • Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary.
Electrophoretic paint features

Image: Diagram illustrating the benefits of electrophoretic paint, including smooth finish, corrosion resistance, rust resistance, and non-toxic properties.

Troubleshooting

ProblemPossible CauseSolution
Furniture feels wobbly or unstable.Loose screws or uneven surface.Check and tighten all assembly screws. Ensure the furniture is placed on a flat, level surface. Adjust nylon foot pads if present.
Difficulty during assembly.Parts misalignment or incorrect orientation.Review the assembly instructions carefully. Ensure parts are oriented correctly before tightening screws. Do not fully tighten screws until all parts are loosely assembled.
Minor scratches or paint chips.Accidental impact or wear.Touch up with rust-inhibiting outdoor paint matching the original color. Clean the area thoroughly before applying paint.
Water accumulation on seats.Heavy rainfall or blocked drainage.The hollow seat design is intended for drainage. Ensure drainage slots are clear of debris. Tilt chairs to assist drainage if necessary.

Specifications

FeatureDetail
BrandMELLCOM
Model NumberPatio Bistro Sets
Set Name3-Piece Bistro Set
ColorYellow
Material TypeMetal
Item Weight46.3 Pounds (approximately 21 kg)
Chair Weight Capacity350 lbs (approximately 158 kg)
Table Weight Capacity110 lbs (approximately 50 kg)
Item Dimensions (Chair)24.8 x 23.43 x 33.07 inches (L x W x H)
Included Components2 Bistro Chairs, 1 Bistro Table
Required AssemblyYes

Warranty Information

Specific warranty details for the MELLCOM 3 Piece Patio Set are not provided in this manual. For information regarding product warranty, please refer to the product packaging, purchase documentation, or contact MELLCOM customer support directly.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact MELLCOM customer support.

Please have your product model number (Patio Bistro Sets) and purchase information ready when contacting support.

For further assistance, you may visit the official MELLCOM store on Amazon: MELLCOM Store

© 2026 MELLCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.