1. Introduction
Thank you for purchasing the Bumpboxx Retro Pager Beeper Wireless Bluetooth Speaker. This manual provides detailed instructions for the proper use, setup, operation, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Overview
The Bumpboxx Retro Pager Beeper is a compact and versatile portable Bluetooth speaker designed for on-the-go audio. Its retro pager design houses modern features, making it suitable for various outdoor activities.
Key Features:
- Bluetooth 5.0 Connectivity: Ensures stable and efficient wireless audio streaming with a range of approximately 30 feet.
- Hands-Free Calling: Equipped with a built-in high-sensitivity microphone for clear conference or personal calls.
- IPX6 Water Resistance: Protects the speaker from strong jets of water, making it suitable for outdoor use.
- Integrated LED Flashlight: Provides illumination for convenience in low-light conditions.
- Multiple Playback Options: Supports Bluetooth, Aux-in, USB player, and MP3 playback via TF Card Slot.
- Long Battery Life: Offers over 7 hours of playtime on a full charge.
- Compact and Portable: Weighs only 3.2 oz with dimensions of 3.15 x 2.02 x 1.29 inches (LxWxH), ideal for clipping onto gear.
Figure 2.1: Front and back view of the Bumpboxx Retro Pager Beeper speaker, highlighting its compact design and clip.
Figure 2.2: Detailed view of the speaker's top and side, indicating key features and connectivity options.
3. What's in the Box
Upon unboxing your Bumpboxx Retro Pager Beeper, please ensure all the following items are present:
- Bumpboxx Retro Pager Beeper Wireless Bluetooth Speaker
- USB Charging Cable
- Aux Input Line
- Wrist Band Strap
- User Manual (this document)
4. Setup
4.1 Charging the Speaker
Before first use, fully charge the speaker.
- Connect the small end of the provided USB charging cable to the charging port on the speaker.
- Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Once fully charged, the light may change color or turn off, depending on the model. A full charge provides over 7 hours of playtime.
4.2 Powering On/Off
- To Power On: Press and hold the Power button (⏻) for a few seconds until you hear an audible prompt or see an indicator light.
- To Power Off: Press and hold the Power button (⏻) again for a few seconds until the speaker powers down.
5. Operating Instructions
5.1 Bluetooth Pairing
Pair your speaker with a Bluetooth-enabled device (smartphone, tablet, laptop) to stream audio wirelessly.
- Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED light or audible prompt).
- On your device, navigate to the Bluetooth settings.
- Search for available devices. The speaker will appear as "Bumpboxx Retro Pager Beeper" or similar.
- Select the speaker from the list to connect. Once connected, the LED indicator will typically become solid, and you may hear a confirmation sound.
5.2 Hands-Free Calling
When connected via Bluetooth to a smartphone, you can use the speaker for hands-free calls.
- Answer Call: Press the Multi-function button (often the Play/Pause button) once to answer an incoming call.
- End Call: Press the Multi-function button once again to end an active call.
- Reject Call: Press and hold the Multi-function button to reject an incoming call.
5.3 Music Playback
- Play/Pause: Press the Multi-function button once.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
5.4 Using the LED Flashlight
The speaker includes a built-in LED flashlight.
- Turn On/Off: Locate the dedicated "LIGHT" button on the side of the speaker and press it to toggle the flashlight on or off.
5.5 Aux-in Mode
Connect non-Bluetooth devices using the provided Aux input line.
- Connect one end of the Aux input line to the speaker's AUX port.
- Connect the other end to the audio output jack of your device (e.g., MP3 player, computer).
- The speaker should automatically switch to Aux mode. If not, press the 'M' (Mode) button to cycle through modes until Aux mode is activated.
5.6 USB Player and TF Card Player
The speaker supports direct playback from USB drives and TF (MicroSD) cards.
- Insert a USB drive into the USB port or a TF card into the TF card slot.
- The speaker should automatically detect the media and begin playback. If not, press the 'M' (Mode) button to switch to USB or TF card mode.
Figure 5.1: Side view illustrating the USB and AUX input ports for wired connections.
6. Maintenance
6.1 Cleaning
- Use a soft, dry cloth to clean the exterior of the speaker.
- Do not use abrasive cleaners, alcohol, benzene, or other chemical solvents, as these may damage the casing.
6.2 Storage
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery periodically (e.g., every 3 months) to maintain battery health.
6.3 Water Resistance (IPX6)
The speaker is IPX6 water-resistant, meaning it can withstand strong water jets. However, it is not designed for submersion.
- Ensure all port covers are securely closed before exposing the speaker to water.
- Do not submerge the speaker in water.
- After exposure to water, wipe the speaker dry before charging or opening port covers.
7. Troubleshooting
If you encounter issues with your Bumpboxx Retro Pager Beeper, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker fully using the provided USB cable. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode; device Bluetooth is off; too far from speaker. | Ensure speaker is in pairing mode. Turn Bluetooth off and on again on your device. Move device closer to speaker (within 30 feet). |
| No sound from speaker. | Volume too low; incorrect input mode; device not playing audio. | Increase speaker and device volume. Press 'M' button to cycle through modes (Bluetooth, Aux, USB, TF). Ensure audio is playing on the connected device. |
| Flashlight not working. | Battery low; flashlight button not pressed correctly. | Charge the speaker. Press the "LIGHT" button firmly. |
8. Specifications
Detailed technical specifications for the Bumpboxx Retro Pager Beeper:
| Feature | Detail |
|---|---|
| Model Name | Retro Pager Beeper |
| Speaker Type | Outdoor, Portable |
| Connectivity Technology | Bluetooth 5.0, Auxiliary |
| Wireless Range | Approximately 30 feet |
| Battery Life | 7+ Hours |
| Water Resistance Rating | IPX6 |
| Included Components | USB charging cable, Aux input line, Wrist Band Strap, User manual |
| Dimensions (LxWxH) | 3.15 x 2.02 x 1.29 inches |
| Item Weight | 3.2 ounces |
| Speaker Maximum Output Power | 3 Watts |
| Compatible Devices | Desktop, Laptop, MP3 Player, Smartphone, Tablet |
9. Warranty and Support
The Bumpboxx Retro Pager Beeper comes with a limited warranty. Please refer to the warranty information provided with your purchase documentation for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact Bumpboxx customer service through their official website or the retailer from whom you purchased the product.
Manufacturer: BumpBoxx
Model Number: dfd4950c-114c-4ab5-b83b-6c0422d22703
UPC: 703670890147