Titan Neo Curve Quartz Analog Watch with Date (Model 1885SL04) User Manual

1. Introduction

Welcome to the user manual for your Titan Neo Curve Quartz Analog Watch with Date, Model 1885SL04. This watch combines classic design with modern functionality, featuring designer indices, shaped hands, and a convenient date function. This manual will guide you through the proper setup, operation, and care to ensure optimal performance and longevity of your timepiece.

Key Features:

• Designer indices with minute tracker for precise timekeeping.
• Stylishly shaped hands for clear readability.
• Integrated date function for daily convenience.
• Durable stainless steel case with a distinctive square shape.
• 50-meter water resistance for everyday use.

2. Setting Up Your Watch

2.1 Unpacking

Carefully remove your watch from its packaging. Inspect the watch for any visible damage. The watch comes with a protective film on the crystal and case back, which should be removed before use.

2.2 Setting the Time

1. Pull the crown (the small knob on the side of the watch) out to the second click position. This will stop the second hand.
2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time. When setting the time, ensure the AM/PM is correctly set, especially if the watch has a date function. Advance the hands past 12 o'clock to see if the date changes; if it does, it's midnight.
3. Once the time is set, push the crown back into its normal operating position. The second hand will resume movement.

2.3 Setting the Date

1. Pull the crown out to the first click position.
2. Turn the crown clockwise or counter-clockwise (depending on the movement) to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this is when the date mechanism is engaged and could be damaged.
3. Once the date is set, push the crown back into its normal operating position.

3. Operating Your Watch

3.1 Reading the Time

Your Titan Neo Curve watch features an analog display with hour, minute, and second hands. The designer indices and minute tracker on the green dial provide clear visibility for accurate time reading.

3.2 Date Function

The date window is located at the 6 o'clock position. The date will automatically advance once every 24 hours, typically around midnight. If the date changes during the day, you may need to adjust the time by advancing the hour hand by 12 hours.

4. Care and Maintenance

4.1 Cleaning Your Watch

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth regularly. For the leather strap, avoid prolonged exposure to water, direct sunlight, and harsh chemicals to prevent damage and discoloration. If the strap gets wet, dry it thoroughly with a soft cloth.

4.2 Water Resistance

Your Titan Neo Curve watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands. It is not suitable for diving, snorkeling, or prolonged water activities. Always ensure the crown is fully pushed in before any contact with water. Do not operate the crown while the watch is wet.

4.3 Battery Replacement

The watch is powered by a quartz movement and requires one 'A' type battery (included). When the battery is low, the second hand may start to skip seconds or stop entirely. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance. Do not attempt to replace the battery yourself.

5. Troubleshooting

5.1 Watch Not Running

• Check the Crown: Ensure the crown is fully pushed in to the normal operating position. If it is pulled out, the watch will not run.
• Battery Life: If the watch suddenly stops or the second hand skips, the battery may need replacement. Contact an authorized service center.
• Impact Damage: If the watch has experienced a significant impact, internal components may be damaged. Seek professional repair.

5.2 Incorrect Time or Date

• Reset Time/Date: Follow the instructions in Section 2.2 and 2.3 to correctly set the time and date.
• Crown Position: Ensure the crown is fully pushed in after setting. If it remains partially pulled out, the timekeeping may be affected.
• Magnetic Fields: Strong magnetic fields can affect quartz watch accuracy. Keep the watch away from magnets.

6. Product Specifications

7. Warranty and Customer Support

7.1 Limited Warranty

Your Titan Neo Curve watch comes with a limited warranty. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period.

7.2 Customer Support

For any questions, service requests, or warranty claims, please contact Titan customer support. You can find contact information on the official Titan website or through the retailer where you purchased the watch. When contacting support, please have your watch model number (1885SL04) and proof of purchase readily available.