BROTECT Flex Full-Cover Screen Protector User Manual

Introduction

The BROTECT Flex Full-Cover screen protector provides comprehensive all-round protection for your curved screen. It is precisely tailored in Germany and is fully compatible with your YYKY E02 2.01" device. This film effectively protects your curved screen against dust and scratches. Made from an innovative and highly flexible material, BROTECT Flex is specifically developed for curved surfaces. Its surface features a special coating with self-healing properties, allowing small scratches to disappear automatically. The protector maintains the original touch experience of your display, and its high-quality material ensures excellent transparency, displaying all content in razor-sharp detail. For optimal results, it is crucial to follow the installation instructions and video precisely. Any small air bubbles that remain after installation are expected to disappear within 2 to 3 days.

• Made in Germany: The BROTECT 3D Full Cover screen protector film is precisely cut to fit, compatible with YYKY E02 2.01".
• Self-Healing: The surface of this protection film has a special self-healing and scratch-resistant coating that makes scratches disappear by themselves.
• Anti-Fingerprint: You can easily wipe dirt and fingerprints off the screen protector thanks to the new anti-fingerprint technology.
• Crystal Clear: Our Full Screen BROTECT Protection film is highly transparent so that all content is displayed in razor-sharp detail - compatible with YYKY E02 2.01".
• Delivery Includes: 2x BROTECT Full Coverage Protector compatible with YYKY E02 2.01", installation kit with cleaning wipe, card and installation video.

Setup and Installation

This section guides you through the proper installation of your BROTECT Flex Full-Cover screen protector.

What's in the Box:

• 2x BROTECT Flex Full-Cover Screen Protector compatible with YYKY E02 2.01"
• Cleaning wipe
• Wet pad
• Installation card
• Dust remover
• 3 guide stickers
• Installation instructions

Installation Steps:

For a visual guide, please refer to the installation video available at: brotect.eu/products/flex/installation

Image: Detailed step-by-step installation guide for the screen protector, showing cleaning, film removal, alignment, and bubble removal.

1. Clean your display: Use the provided cleaning wipe and microfiber cloth to thoroughly clean your device's display, including the edges.
2. Remove upper part of the lower film: Carefully peel off the upper part of the lower film using the Step 1 sticker.
3. Turn screen protector around and align: Align the screen protector precisely on your device and affix the upper part.
4. Remove lower part of the lower film: Peel off the remaining lower part of the film using the Step 2 sticker.
5. Apply screen protector evenly: Use the provided card to evenly apply the screen protector to the display, pressing out any air bubbles.
6. Gently remove remaining bubbles: Continue to gently push out any remaining air bubbles with the card.
7. Remove green cover film: Carefully remove the green cover film using the Step 3 sticker.
8. Carefully press on edge areas: Use your fingers to carefully press down on the edge areas. Small air bubbles that remain after installation will disappear within 2-3 days.

Operating and Features

The BROTECT Flex Full-Cover screen protector offers advanced features for optimal device protection and user experience.

Image: Visual representation of the screen protector's key features, including edge-to-edge coverage, flexibility, transparency, self-healing, and shock absorption.

• Perfect Fit and Full Coverage: Designed specifically for the YYKY E02 2.01", this protector offers complete coverage, including curved edges, safeguarding against dust and scratches.
• Super Flexible and Strong: Made from an innovative material, BROTECT Flex is highly flexible yet robust, ideal for curved surfaces.
• Self-Healing Technology: The surface features a special coating that allows small scratches to disappear on their own, maintaining clarity.
• Anti-Fingerprint: An anti-fingerprint technology ensures that dirt and smudges can be easily wiped away, keeping your screen clean.
• Crystal Clear Transparency: The high-quality material ensures maximum transparency, preserving the original display clarity and vibrant colors.
• Original Touch Experience: The protector maintains the original touch sensitivity and feel of your device's display.

Maintenance

To ensure the longevity and clarity of your BROTECT Flex Full-Cover screen protector, follow these simple maintenance guidelines:

• Cleaning: Due to its anti-fingerprint coating, the screen protector can be easily cleaned. Use a soft, lint-free cloth to gently wipe away fingerprints, dust, and smudges. For stubborn marks, a slightly damp cloth (with water only) can be used, followed by a dry wipe.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the coating and material of the screen protector.
• Self-Healing Feature: Small scratches will naturally disappear over time due to the self-healing property. Avoid intentionally scratching the surface.

Troubleshooting

This section addresses common issues you might encounter during or after the installation of your screen protector.

Air Bubbles After Installation:

Issue: Small air bubbles are visible under the screen protector immediately after installation.

Solution: It is normal for small air bubbles to remain after initial installation, especially if you followed the instructions carefully. Be patient; these bubbles are designed to disappear on their own within 2 to 3 days as the adhesive fully settles. Avoid trying to forcefully push out very small, persistent bubbles, as this can sometimes introduce new issues.

Dust Particles Under the Protector:

Issue: Dust particles are trapped between the screen and the protector.

Solution: This usually occurs if the screen was not perfectly clean before application. While difficult to remove without re-applying, for minor dust, sometimes gently lifting a corner of the protector with a dust remover sticker (if available in your kit) and re-applying can help. For significant dust, a new protector might be necessary to achieve a flawless finish.

Edges Not Sticking Properly:

Issue: The edges of the screen protector are lifting or not adhering fully.

Solution: Ensure that the edges of your device were thoroughly cleaned and free of any oils or debris before application. After applying, carefully press down on the edges with your fingers for a few moments to help them adhere. The flexible material is designed to conform to curved surfaces, but proper initial adhesion is key.

Specifications

Warranty and Support

BROTECT products are manufactured with high standards of quality and precision.

Image: BROTECT quality and warranty badge, emphasizing "Best Quality," "Made in Germany," and "10 years Know-How."

• Quality Assurance: This product is "Made in Germany," reflecting a commitment to high-quality manufacturing and "10 years Know-How" in screen protection technology.
• Installation Support: For detailed visual guidance on installation, please visit the official BROTECT installation video page: brotect.eu/products/flex/installation.
• Manufacturer Contact: For further support or inquiries, please refer to the contact information provided by the manufacturer, BROTECT.