CRAFTSMAN V20 8 FT Cordless Pole Chainsaw

1. Important Safety Information

Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

1.1 General Safety Rules

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

1.2 Personal Protective Equipment (PPE)

Always wear appropriate personal protective equipment when operating the pole chainsaw:

• Eye Protection: Safety glasses or goggles with side shields.
• Head Protection: A hard hat or safety helmet, especially when working near falling debris.
• Hearing Protection: Earplugs or earmuffs.
• Hand Protection: Heavy-duty work gloves.
• Foot Protection: Steel-toed safety boots with non-slip soles.
• Body Protection: Long pants and long-sleeved shirts to protect against cuts and scratches.

1.3 Chainsaw Specific Safety

• Kickback: Be aware of kickback, which can occur when the tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
• Proper Grip: Always hold the pole chainsaw firmly with both hands.
• Maintain Balance: Ensure stable footing and balance, especially when extending the pole.
• Chain Oil: Ensure the chain oil reservoir is filled before each use.
• Clear Work Area: Clear the area of obstacles and ensure no one is directly below the cutting area.

2. Product Overview and Components

The CRAFTSMAN V20 8 FT Cordless Pole Chainsaw is designed for efficient and safe trimming of overhead branches. It features a powerful brushless motor and an 8-inch low kickback bar and chain.

Figure 2.1: Fully assembled CRAFTSMAN V20 8 FT Cordless Pole Chainsaw.

2.1 Kit Contents

Your CRAFTSMAN V20 8 FT Cordless Pole Chainsaw kit includes the following items:

Figure 2.2: Contents of the CRAFTSMAN V20 8 FT Cordless Pole Chainsaw kit.

• CRAFTSMAN V20 8 FT Cordless Pole Chainsaw (CMCPS630D1)
• V20 Lithium Ion Battery (CMCB202)
• V20 Lithium Charger
• Bar Sheath
• Wrench
• Instruction Manual

2.2 Main Components

Figure 2.3: Diagram illustrating the main components of the pole chainsaw.

1. Brushless Motor
2. 8 in. Bar and Chain
3. Auto-Oiling System
4. Bucking Spike and Branch Hook
5. 10 ft. Folding Pole
6. V20 Lithium Ion Battery Port

3. Setup and Assembly

3.1 Charging the Battery

Before first use, fully charge the V20 Lithium Ion Battery using the included charger. Refer to the charger's instruction manual for detailed charging procedures.

Figure 3.1: The pole chainsaw, battery, and charger.

3.2 Assembling the Pole Chainsaw

The 10 ft. pole folds for easy transport and convenient storage. To assemble for use:

1. Unfold the pole sections until they are fully extended and aligned.
2. Secure the pole sections by tightening the locking collar. Ensure it is firmly tightened to prevent movement during operation.
3. Insert the charged V20 battery into the battery port until it clicks into place.

3.3 Adding Chain Oil

The pole chainsaw features an auto-oiling system. It is crucial to fill the chain oil reservoir before each use to ensure proper lubrication of the bar and chain.

1. Place the pole chainsaw on a flat, stable surface with the oil cap facing upwards.
2. Unscrew the oil cap.
3. Carefully pour high-quality bar and chain oil into the reservoir until it reaches the MAX fill line. Do not overfill.
4. Replace the oil cap and tighten it securely.

4. Operating Instructions

4.1 Pre-Operation Checks

Before each use, perform the following checks:

• Verify the battery is fully charged and securely installed.
• Check the chain oil level and refill if necessary.
• Inspect the bar and chain for any damage or dullness.
• Ensure all pole sections are securely locked.
• Confirm the work area is clear of people, pets, and obstacles.

4.2 Starting and Stopping

To start the pole chainsaw, press the safety lock-off button and then squeeze the trigger switch. To stop, release the trigger switch.

4.3 Proper Cutting Techniques

The brushless motor provides high-efficiency cutting performance.

Figure 4.1: Demonstrating the high-efficiency brushless motor during operation.

When cutting, position the pole chainsaw so that the chain makes contact with the branch at a slight angle. Allow the saw to do the work; do not force it. The saw is designed for fast cutting, capable of cutting through 2x4 yellow pine in less than 4.5 seconds.

Figure 4.2: Close-up of the pole chainsaw performing a fast cut.

Utilize the extended reach of the 10 ft. pole for higher branches.

Figure 4.3: The pole chainsaw in use, demonstrating its extended reach.

The integrated bucking spike and branch hook assist in easily removing cut branches and providing leverage during cuts.

Figure 4.4: Detail of the bucking spike and branch hook.

4.4 Official Product Video

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pole chainsaw.

5.1 Chain Sharpening and Replacement

• A sharp chain is essential for safe and efficient cutting. Sharpen the chain regularly or replace it when dull or damaged.
• Refer to the chain manufacturer's instructions for proper sharpening angles and techniques.

5.2 Bar Maintenance

• Regularly clean the guide bar groove to remove sawdust and debris.
• Flip the guide bar periodically to ensure even wear.

5.3 Cleaning and Storage

After each use:

• Remove the battery.
• Clean the pole chainsaw with a damp cloth. Do not use harsh chemicals.
• Drain the chain oil from the reservoir before long-term storage to prevent leaks and mess.
• The 10 ft. pole folds for convenient transport and storage. Fold the pole and secure it for compact storage.

Figure 5.1: Folding the pole chainsaw for convenient storage.

Store the pole chainsaw in a dry, secure location out of reach of children.

6. Troubleshooting

7. Specifications

8. Warranty and Support

CRAFTSMAN products are designed for durability and performance. For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official CRAFTSMAN website. Keep your proof of purchase for warranty claims.