Yaheetech Fillable Mobile Umbrella Base Instruction Manual

Introduction

Thank you for choosing the Yaheetech Fillable Mobile Umbrella Base. This heavy-duty patio umbrella pole holder is designed to provide stable and mobile support for your outdoor umbrella. Its fillable capacity allows for customizable weight, and the integrated wheels ensure easy repositioning. Please read this manual carefully before assembly and use to ensure proper operation and longevity of your product.

Image: The Yaheetech Fillable Mobile Umbrella Base, showcasing its square, faux-rattan textured design and four integrated wheels.

Safety Information

• Ensure the base is filled to the recommended capacity (water, sand, or mix) for optimal stability, especially in windy conditions.
• Always lock the wheels when the umbrella base is in its desired position to prevent unintended movement.
• Do not attempt to move the base with an umbrella inserted and open during strong winds. Close the umbrella first.
• Keep children and pets away from the umbrella base during movement or filling operations.
• Regularly check all connections and screws to ensure they are tight and secure.
• Avoid placing the base on uneven surfaces, which could compromise stability.

Parts List

Please verify that all components are present before beginning assembly:

• Umbrella Base (1)
• Umbrella Pole Holder/Tube (1)
• Thumb Screws (2)
• Lockable Wheels (4) - (May be pre-attached or require attachment)
• Instruction Manual (1)

Image: Close-up view of the sturdy iron metal tubing for the pole, dual thumb screws, elegant textured design of the base, and lockable wheels, illustrating key components.

Setup

1. Attach Wheels (if not pre-attached): If the wheels are not already attached, carefully insert each of the four lockable wheels into the designated slots on the underside of the base. Ensure they click securely into place.
2. Insert Pole Holder: Place the umbrella pole holder/tube into the central opening on the top of the base. Ensure it is seated firmly.
3. Secure Pole Holder: Locate the two thumb screws. Insert them into the threaded holes on the side of the pole holder and tighten them to secure the holder to the base. Do not overtighten.
4. Fill the Base:
   • Open the filling cap located on the top surface of the base.
   • Fill the base with your chosen material:
     • Water: Up to 37 liters (approx. 82 lb / 37 kg)
     • Sand: Up to 60 kg (approx. 132 lb)
     • Water-Sand Mix: Up to 56 kg (approx. 123 lb)
   • Close the filling cap tightly to prevent leakage.
5. Position the Base: Roll the base to your desired location. Ensure the surface is level.
6. Lock the Wheels: Engage the locking mechanism on each of the four wheels to secure the base in place.

Image: Diagram showing the top water inlet for adding water and sand, and the side drainage outlet for convenient emptying of filling material. Indicates water capacity of 37L and sand/water mix capacity of 123 lbs.

Image: Close-up of the umbrella pole holder showing the two thumb screws, with arrows indicating the tightening direction to keep the umbrella fixed and secure.

Operating Instructions

1. Inserting the Umbrella Pole: Insert the pole of your patio umbrella into the pole holder. The base is suitable for umbrella poles with diameters of 1.5 inches (38mm) and 1.9 inches (48mm).
2. Securing the Umbrella Pole: Tighten the two thumb screws on the pole holder until the umbrella pole is firmly secured and does not wobble.
3. Moving the Base: To reposition the base, first close your umbrella. Then, unlock all four wheels. Carefully push or pull the base to the new desired location. Once in place, re-lock all wheels.
4. Emptying the Base: To empty the base, unlock the side drainage outlet and allow the contents to drain. This is useful for seasonal storage or when moving the base over long distances.

Image: Illustration demonstrating the four lockable universal wheels, highlighting the locked and unlocked states, which make movement effortless while keeping the base in place.

Image: Details on umbrella pole compatibility, showing the sturdy base with double thumb screws and suitability for umbrella poles with diameters of 1.5in (38mm) and 1.9in (48mm).

Maintenance

• Cleaning: Wipe the base with a damp cloth and mild soap as needed. Avoid harsh chemicals or abrasive cleaners that could damage the faux-rattan finish.
• Seasonal Storage: For prolonged periods of non-use, especially during winter, it is recommended to empty the base of water or sand to prevent freezing damage or material degradation. Store the base in a dry, sheltered area.
• Inspection: Periodically inspect the base, pole holder, and wheels for any signs of wear, damage, or loose connections. Tighten thumb screws as necessary.

Troubleshooting

Specifications

Image: Diagram illustrating the key dimensions of the umbrella base: 22 inches in length, 22 inches in width, and 17 inches in height, with the pole holder extending 8 inches above the base.

Warranty and Support

For warranty information or technical support, please contact Yaheetech customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Yaheetech store for more information and support resources:

Visit the Yaheetech Store