LungSank Oxygen Concentrator User Manual

1. Introduction

This user manual provides essential information for the safe and effective operation of your LungSank Oxygen Concentrator. Please read this manual thoroughly before using the device and keep it for future reference.

The LungSank Oxygen Concentrator is designed for home use, providing high-purity oxygen.

2. Safety Information

Important Safety Precautions:

• Do not smoke or allow open flames near the oxygen concentrator or oxygen tubing. Oxygen supports combustion.
• Keep the device away from heat sources and direct sunlight.
• Ensure proper ventilation around the device. Do not block air inlets or outlets.
• Use only distilled or purified water in the humidifier bottle.
• Do not immerse the device in water or other liquids.
• Unplug the device before cleaning or maintenance.
• This device is for supplemental oxygen therapy and is not intended for life support. Consult a medical professional for appropriate oxygen therapy settings.

3. Package Contents

Please check the package contents upon unboxing:

• Oxygen Concentrator Unit
• Power Cord
• Remote Control
• Nasal Cannula (Disposable)
• Humidifying Water Cup
• Atomization Package (Nebulizer Kit)
• Filter
• User Manual

All components included with your LungSank Oxygen Concentrator.

4. Product Overview

Familiarize yourself with the main parts and controls of your oxygen concentrator.

Control panel and display features.

Control Panel Features:

1. Normal Working State Indicator
2. Machine Failure Indicator
3. Low Oxygen Concentration Indicator (below 82%)
4. Voice Indicator Light
5. Negative Ion Indicator Light
6. Oxygen Concentration Display
7. Flow Display
8. Countdown and Time Display
9. SOS One-Button Help Button
10. Voice Switch Button
11. Oxygen Making Switch Button
12. Flow Regulation Button
13. Oxygen Making Timing Setting Button

5. Setup

5.1 Initial Placement

Place the oxygen concentrator on a flat, stable surface. Ensure there is at least 10 cm of clear space around all sides for adequate ventilation.

5.2 Power Connection

Connect the power cord to the device and then plug it into a grounded electrical outlet.

5.3 Humidifier Bottle Setup (Optional for Humidified Oxygen)

1. Unscrew the humidifying water cup from the device.
2. Fill the cup with distilled or purified water up to the "MAX" line. Do not overfill.
3. Screw the humidifying water cup back onto the device securely.
4. Connect the nasal cannula to the oxygen outlet on the humidifier bottle.

Filling the humidifying water cup.

Note: You can also use the oxygen function directly without adding water if humidification is not desired.

6. Operating Instructions

6.1 Power On/Off

Press the "Oxygen Making Switch Button" on the control panel or the remote control to turn the device on or off.

6.2 Adjusting Oxygen Flow

Use the "Flow Regulation Button" on the control panel or the remote control to adjust the oxygen flow rate from 2 to 9 L/min. The current flow rate will be displayed on the screen.

Oxygen concentration varies with flow rate. At 2L/min, concentration reaches 96%.

6.3 Setting the Timer

Press the "Oxygen Making Timing Setting Button" to set the operating time. Each press increases the duration by 30 minutes, up to a maximum of 240 minutes. The remaining time will be displayed.

The device features a timer for convenient use, allowing for continuous operation for up to 240 minutes.

6.4 Nebulization Function

1. Locate the atomization port on the back of the device.
2. Unscrew the protective cap from the atomization port.
3. Connect the nebulizer kit tubing to the atomization port.
4. Add the prescribed medication to the nebulizer cup.
5. Turn on the device and select the nebulization function (if applicable, or it may activate automatically when connected).

The device supports nebulization for medication delivery.

6.5 Remote Control Usage

The included remote control allows for convenient operation from a distance. All main functions (power, flow adjustment, timer) can be controlled via the remote.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your device.

7.1 Cleaning the Exterior

Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.

7.2 Humidifier Bottle Cleaning

Clean the humidifier bottle daily with mild soap and water. Rinse thoroughly and allow to air dry completely before reattaching.

7.3 Filter Replacement

The device features an 8-stage filtration system. Regularly check and replace filters as indicated by the device or as per the recommended schedule in the full manual.

The 8-stage filtration system ensures clean and safe oxygen.

8. Troubleshooting

If the problem persists after attempting these solutions, please contact LungSank customer support.

9. Specifications

10. Warranty and Support

Your LungSank Oxygen Concentrator comes with a standard manufacturer's warranty. For details regarding warranty coverage and duration, please refer to the warranty card included in your package or visit the official LungSank website.

For technical support, troubleshooting assistance, or replacement parts, please contact LungSank customer service through the retailer where you purchased the product or via the contact information provided on the LungSank brand store page.

Visit the LungSank Brand Store