Introduction
Thank you for choosing the YITAHOME Counter Height Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image: Four YITAHOME counter height bar stools with beige cushions in a modern kitchen setting.
Safety Information
- Weight Limit: Do not exceed a weight limit of 250 pounds per stool. Exceeding this limit may result in damage to the product or personal injury.
- Assembly: Follow assembly instructions carefully. Ensure all parts are correctly installed and tightened before use.
- Stability: Always place the stools on a flat, stable surface to prevent tipping.
- Children: Keep small parts away from children during assembly.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact YITAHOME customer service.
| Item | Description | Quantity (per stool) |
|---|---|---|
| A | Chair Backrest (Woven Rope) | 1 |
| B | Chair Base Frame | 1 |
| C | Swivel Plate | 1 |
| D | Footrest Ring | 1 |
| E | Seat Cushion | 1 |
| F | M6x20 Bolts | 8 |
| G | M6 Washers | 8 |
| H | Allen Key | 1 |
Setup & Assembly Instructions
Follow these steps to assemble your YITAHOME Counter Height Bar Stools. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Assemble the Chair Base Frame:
Connect the two main leg sections of the chair base (B) together. Ensure the alignment is correct. - Attach the Swivel Plate:
Rotate the swivel plate (C) to separate the upper and lower iron plates. Align the four holes in the lower iron plate with the four screw holes on the assembled base frame (B). Secure with M6x20 bolts (F) and M6 washers (G). Tighten to 80% initially.Video: Outdoor Bar Stools Installation Video - Demonstrates attaching the swivel plate to the base frame.
- Attach the Footrest Ring:
Align the footrest ring (D) with the designated holes on the chair base frame (B). Secure with M6x20 bolts (F) and M6 washers (G). Pay attention to the up and down directions of the footrest to ensure the curvature of the screw hole is fully aligned with the leg. Tighten to 80% initially. - Attach the Chair Backrest:
Position the chair backrest (A) onto the assembled base and swivel plate. Align the holes on the backrest with the corresponding holes on the swivel plate. Secure with M6x20 bolts (F) and M6 washers (G). Tighten to 80% initially. - Final Tightening:
Once all components are loosely assembled, fully tighten all bolts to 100% using the provided Allen key (H). Ensure all connections are secure and stable. - Place the Seat Cushion:
Place the seat cushion (E) onto the chair. The cushion features ties to secure it to the chair frame, preventing it from slipping or blowing away in windy conditions.
Video: How to Assembly the Stool - Provides a visual guide for the assembly process.
Operating Instructions
- 360-Degree Swivel: The bar stools are equipped with a smooth 360-degree swivel mechanism, allowing for easy rotation and engagement in conversations or activities around you.
- Versatile Use: These stools are designed for both indoor and outdoor environments, making them suitable for patios, outdoor kitchens, gardens, porches, BBQ areas, and indoor bar setups.
Image: Diagram illustrating the smooth 360-degree swivel feature of the bar stool.
Video: YITAHOME Patio Bar Set - Showcases the bar stools in various outdoor settings.
Maintenance
- Cushion Care: The cushion covers are removable for easy replacement and cleaning. Hand wash or machine wash on a gentle cycle with cold water. Air dry only.
- Frame Care: Wipe the iron frame with a damp cloth and mild soap. Avoid harsh chemicals.
- Rope Weave: The hand-woven cotton rope is durable and weather-resistant. Clean with a soft brush and mild soapy water, then rinse thoroughly and air dry.
- Storage: For prolonged product life, especially during harsh weather conditions, store cushions indoors and consider covering the stools when not in use.
Image: Close-up of the soft, thick, and breathable cushion, highlighting its quality.
Troubleshooting
- Wobbly Stool: If the stool feels wobbly, check that all bolts are fully tightened. Ensure the stool is placed on an even surface. Adjust the leveling mechanisms on the bottom of the legs if applicable.
- Difficulty Aligning Holes: During assembly, do not fully tighten any bolts until all parts are loosely connected. This allows for minor adjustments to align all holes correctly before final tightening.
Specifications
- Brand: YITAHOME
- Model Number: MAYIHKA5VN
- Product Dimensions (Single Chair): 21.7''L x 19.7''W x 44.1''H (55cm L x 50cm W x 112cm H)
- Seat Height: Approximately 27.5 inches (70cm)
- Cushion Thickness: 2.8 inches (7cm)
- Item Weight (Set of 4): 70.5 pounds
- Weight Capacity: Up to 250 pounds per stool
- Materials: Sturdy iron frame, hand-woven cotton rope, soft padded cushions
- Features: 360-degree swivel, built-in footrests, curved armrests, removable cushion covers
Image: Detailed diagram illustrating the dimensions of the bar stool for reference.
Warranty & Support
For warranty information, please refer to the documentation included with your purchase or visit the official YITAHOME website. For any questions, missing parts, or assistance, please contact YITAHOME customer service.